Study the Effect on Activity of Alumina Supported CuO-CeO2-ZrO2 Catalysts Prepared by Four Methods for CO Oxidation

https://doi.org/10.22146/ajche.49730

Gaurav Rattan(1*), R. Prasad(2)

(1) 
(2) 
(*) Corresponding Author

Abstract


In the present study four catalysts, prepared by four different methods i.e. co- impregnation, citric acid sol-gel, urea nitrate combustion and urea gelation co- precipitation methods, have been used to study the effect of CO oxidation. The precursor Cu(NO3) 23H2O has been used as for the preparation of catalysts having the composition CuCe5.17Zr3.83Ox/-Al2O3(25wt%). Catalysts were calcined at 5000C and characterized by BET, XRD, TGA/DSC and SEM. A fixed weight (100 mg) of the catalyst was taken in a tubular fixed bed reactor at atmospheric pressure. 2.0% CO in air at a total feed rate of 60 ml/min was used in the reactor. The oxidation of CO to carbon dioxide was carried out at temperature ambient to 280oC. The preparation methods effect the catalytic activity of the catalysts as is discussed in the results. Excellent activity for CO oxidation is shown by the catalyst prepared by sol – gel method followed by co-impregnation, urea gelation and urea nitrate combustion methods. It exhibited the total conversion at 210oC. All the four catalysts prepared did not show any deactivation activity for 50 hours of continuous runs.

Keywords


CO Oxidation, Alumina, Sol-Gel, Combustion, Oxidation, Ceria, Catalyst

Full Text:

PDF


References

1. Aguila, G., Gracia, F., and Araya, P. (2008). CuO and CeO2 Catalysts Supported on Al2O3, ZrO2, and SiO2 in the Oxidation of CO at Low Temperature, Appl. Catal. A: Gen., 343, 16.
2. Artizzu, P., Garbowski, E., Primet, M., Brulle, Y. and Saint-Just, J. (1999). Catalytic combustion of methane on aluminate-supported copper oxide, Catal. Today, 47, 83.
3. Avgouropoulos, G., Ioannides, T. (2003). Selective CO oxidation over CuO-CeO2 catalysts prepared via the urea–nitrate combustion method, Appl. Catal. A, 244 155.

4. Ayastuy, J.L., Gurbani, A., González- Marcos, M.P. and Gutiérrez-Ortiz, M.A.; (2010). CO oxidation on CeXZr1−XO2- supported CuO catalysts: Correlation between activity and support composition, Appl. Catal. A, 387, 119.

5. Balducci, G., Fornasiero, G.P., Monte, R. Di, Kaspar, J., Meriani, S. and Graziani, M. (1995). An unusual promotion of the redox behavior of CeO2 -ZrO2 solid solutions upon Sintering at high temperatures , Catal. Lett., 33 193.

6. Cao, J.L., Wang, Y., Zhang, T.Y., Wu, S.H.and Yuan, Z.Y. (2008). Preparation Characterization and Catalytic behaviour of Nanostructured Mesoporous CuO/Ce0.8Zr0.2O2
Catalyst for Low Temperature CO Oxidation, Appl. Catal. B, 78, 120.

7. Carniti, P., Gervasini, A., Modica, V.H.and Ravasio, N. (2000). Catalytic selective reduction of NO with ethylene over a series of copper catalysts on amorphous silicas,” Applied Catalysis B: Environmental, 28, 175.
8. Cole, K. J., Carley, A. F., Crudace, M. J., Clarke, M., Taylor, S. H., and Hutchings, G. J. (2010). Copper Manganese Oxide Catalysts Modified by Gold Deposition: The Influence on Activity for Ambient Temperature Carbon Monoxide Oxidation, Catal. Lett., 138,143.
9. Costello, C.K., Kung, M.C., Oh, H.-S., Wang, Y. and Kung, H. (2002). Nature of the Active Site for CO Oxidation on Highly Active Au/γ-Al2O3, Appl. Catal. A: General, 232 159.
10. Di Monte, R., and Kaspar, J. (2005). Nanostructured CeO2-ZrO2 mixed oxides, J. Mater. Chem,. 15, 633.
11. El-Shobaky, G.A. and Ghozza, A.M. (2004). Effect of ZnO doping on surface and catalytic properties of NiO and Co3O4 solids, Materials Letters, 58, 699.
12. El-Shobaky, H.G. (2004). Surface and catalytic properties of Co, Ni and Cu binary oxide systems, Appl. Catal. A: Gen., 278, 1.
13. Federico, G., Marta, M.N. and Antonella, G. (2004). Low temperature oxidation of carbon monoxide: the influence of water and oxygen on the reactivity of a Co3O4 powder surface, Appl. Catal. B: Environ., 48, 267.
14. Gardner, S.D., Hoflund, G.B., Upchurch, B.T., Schryer, D.R. and Kielin, E.J. (1995). Au/MnOx catalystic performance characteristics for low-temperature carbon monoxide oxidation, Appl Catal B., 6, 117.

15. Hamada, H. (1994) . Selective reduction of NO by hydrocarbons and oxygenated hydrocarbons over metal oxide catalysts, Catalysis Today, 22, 21.
16. Kapoor, M.P., Raj, A. and Matsumura, Y. (2001). Methanol decomposition over palladium supported meso porous CeO2-ZrO2 mixed oxides, Micropor Mesopor Mater, 44-45, 565.
17. Kašpar, Jan, Fornasiero, Paolo and Hickey, Neal (2003). Automotive catalytic converters: current status and some perspectives, Catalysis Today, 77, 419.
18. Liang, Q., Wu, X., Weng, D. and Lu, Z. (2008). Selective oxidation of soot over Cu doped ceria/ceria-zirconia catalysts, Catal. Commun., 9, 202.
19. Liu Y., Fu Q.and Stephanopoulos M.F. (2004). Preferential oxidation of CO in H2 over CuO-CeO2 catalysts, Catal Today, 93, 241.
20. Martınez-Arias, A., Fernández-Garcıa M., Hungrıa A. B., Iglesias-Juez A., Gálvez, O.. Anderson J. A., Conesa J. C., Soria J., and Munuera G. (2003). Redox interplay at copper oxide-(Ce, Zr)Ox interfaces: influence of the presence of NO on the catalytic activity for CO
oxidation over CuO/CeZrO, Journal of Catalysis 214, 261.
21. Marba’n, G. and Fuertes, A.B. (2005). Highly Active and Selective CuOx/CeO2 Catalyst Prepared by A Single-Step Citrate Method for Preferential Oxidation of Carbon Monoxide, Appl. Catal. B: Environ., 57, 43. 22. Mguig, B., Calatayud, M. and Minot, C. (2004). CO oxidation over anatase TiO2, -(001), J. Mol. Struct. (Thermochem), 709, 73.

23. Miyadera, T. (1998). Selective reduction of NOx by ethanol on catalysts composed of Ag/Al2O3 and Cu/TiO2 without formation of harmful by- products, Appl. Catal. B, 16, 155.

24. Panatayov , D., M. Khristova, M. and D. Mehandjiev, D. (1995). Application of the Transient Response Technique to the Study of Co + NO + O2 Interaction on CuxCo3−xO4 Catalysts, Journal of Catalysis, 156, 219.
25. Prasad, R. and Rattan, Gaurav(2010). Preparation Methods and Applications of CuO-CeO2 Catalysts: A Short Review, Bulletin of Chemical Reaction Engineering & Catalysis, 5(1), 7.
26. Prasad, R., Rattan, Gaurav and Katyal, R.C. (2012). Effect of Preparation Methods on Al2O3 Supported CuO- CeO2-ZrO2 Catalysts for CO Oxidation, Bulletin of Chemical Reaction Engineering & Catalysis, 7(2), 112.

27. Prasad, R., Rattan, Gaurav, (2009). Design of a Compact and Versatile Bench Scale Tubular Reactor, Bulletin of Chemical Reaction Engineering & Catalysis, 4(1), 5.
28. Royer, S. and Duprez, D. (2011). Catalytic Oxidation of Carbon Monoxide over Transition Metal Oxides, ChemCatChem, 3, 24.
29. Ruth, K., Hayes, M., Burch, R., Tsubota, S. and Haruta, M. (2000). The effects of SO2 on the oxidation of CO and propane on supported Pt and Au catalysts, Appl. Catal. B, 24, 133.

30. Santra A.K. and Goodman, D.W. (2002). Catalytic oxidation of CO by platinum group metals: from ultrahigh vacuum to elevated pressures, Electrochimica Acta, 47, 3595.
31. Sarkar, A. D and, Khanra, B.C. (2005). CO oxidation and NO reduction over supported Pt-Rh and Pd-Rh nanocatalysts: a comparative study, Journal of Molecular Catalysis A:
Chemical, 29, 25.
32. Severino,F., Brito, J.L., Laine, J., Fierro, J.L.G. and Agudo, A. L. (1998). Nature of
Copper Active Sites in the Carbon Monoxide Oxidation on CuAl2O4and CuCr2O4Spinel Type Catalysts, Journal of Catalysis, 177, 82.
33. Stankova, N.B., Khristova, M.S. and Mehandjiev, D.R. (2001). Catalytic Reduction of NO with CO on Active Carbon-Supported Copper, Manganese, and Copper–Manganese
Oxides, Journal of Colloid and Interface Science, 241, 439.
34. Sun, K., Liu, J.and Browning, N.D. (2002). Direct atomic scale analysis of the distribution of Cu valence states in Cu/- gamma-Al2O3 catalysts, Appl. Catal. B Environ., 38, 271.
35. Zheng, X., Wang, S., Zhang, S., Huang, W. and Wu, S. (2004). Copper Oxide Catalysts Supported on Ceria for Low-Temperature CO Oxidation, Catal. Commun, 5, 729.



DOI: https://doi.org/10.22146/ajche.49730

Article Metrics

Abstract views : 1676 | views : 1365

Refbacks

  • There are currently no refbacks.


ASEAN Journal of Chemical Engineering  (print ISSN 1655-4418; online ISSN 2655-5409) is published by Chemical Engineering Department, Faculty of Engineering, Universitas Gadjah Mada.