A Dynamic Model for Ultrasonic – assisted Extraction of Bio-active Compounds from Natural Products

https://doi.org/10.22146/ajche.49741

Trung Kien Tran(1*), Lan Huong Phung(2), Hoai Nga Le(3), Thi Thu Huyen Nguyen(4), Xuan Son Nghiem(5), Van Thiem Pham(6)

(1) Department of Chemical Engineering, Hanoi University of Science and Technology (HUST), No. 1, Dai Co Viet Str., Hanoi, Vietnam.
(2) Department of Chemical Engineering, Hanoi University of Science and Technology (HUST), No. 1, Dai Co Viet Str., Hanoi, Vietnam.
(3) Department of Chemical Engineering, Hanoi University of Science and Technology (HUST), No. 1, Dai Co Viet Str., Hanoi, Vietnam.
(4) Department of Chemical Engineering, Hanoi University of Science and Technology (HUST), No. 1, Dai Co Viet Str., Hanoi, Vietnam.
(5) Department of dynamic and engineering equipment of plant, School of Process Sciences, Technische Universität Berlin, No. 135, 17. Juni Street, 10623 Berlin, Germany.
(6) Bachkhoa Consultancy and Technology Transfer One Member Co., Ltd. (BKContech Co.,Ltd.), HUST, No. 1 Dai Co Viet Str., Hanoi, Vietnam.
(*) Corresponding Author

Abstract


Ultrasonic technique has been applied for extraction processes, especially for separation of bio-active substances from natural organic products because of the short time requirement, energy saving and easy operating. The ultrasonic-assisted extraction (UE) therefore becomes a promising option. However, a major available obstacle was the lack of appropriate models for designing technological process. This paper presents a dynamic model for the UE process, application of separation of bio-active substances from natural products such as Curcumin from rhizome of Curcuma Longa L., Epigallocatechin from green tea leaf of Camellia Sinensis and Rutin from bud of Sophora Japonica. The agreement between data from experiment and calculated ones with the model indicates that, this dynamic model is suitable for prediction of the UE process and for serving as the base for further investigation into scale-up the extraction process.

Keywords


Ultrasonic, Extraction, Curcumin, Epigallocatechin, Rutin.

Full Text:

PDF


References

1. Colegate S. M., Molyneux R. J., (2008). Bioactive Natural Products: Detection, Isolation, and Structural Determination, 2 nd ed., CRC Press, Raton.
2. Gu X., Cai J., Zhang Z., Su Q. (2007). Dynamic Ultrasound-Assisted Extraction of Catechin and Caffeine in Some Tea Samples. Annali di Chimic 97: 321 – 330.
3. Harker J. H., Richardson J. F., Backuhrst J. R. (2002). Chemical Engineering, Vol. 2, 5th ed., Butterworth-Heinemann.
4. Hitoshi K., Nobuyoshi M. (2007). Extraction of Catechins from Green Tea Using Ultrasound, Japanese Journal of Applied Physics 46 (7B): 4936 - 4938.
5. Nguyen Thi Thu Huyen, Tran Trung Kien, Phung Lan Huong, Pham Van Thiem (2010). Research on extraction process for Rutin assisted by ultrasonic, microwave and stir bar. Journal of science and technology, 48 (6A): 296- 304.

6. Nguyen Thi Thu Huyen, Tran Trung Kien, Pham Van Thiem (2010). Applying the dynamic model of Ultrasonic assisted extraction process for study of rutin separation from bud Sophora Japonica L. Journal of science and technology, 48, (6A): 305-312.
7. Sarker S. D., Latif Z., Gray A. I. ( 2006). Natural Products Isolation, 2nd ed., Humana Press Inc, New Jersey.
8. Sonawane S. S., Patil V. S. (2008). Effect of Ultrasound on Leaching of Tannic Acid from Tea and its Modelling. Chem. Eng. Technol. 31 (9): 1304 – 1309.
9. Tran T. K., Nghiem X. S., Phung L. H., Pham V. T. (2007). Study for isolation of Curcumin from Curcuma Longa L. using ultrasonic extraction, Vietnam Journal of Chemistry 45: 52 – 57.
10. Tran T. K., Nghiem X. S., Phung L. H. (2008). Dynamic model of Curcumin isolation process from yellow turmeric using ultrasonic extraction, Vietnam
Journal of Chemistry 46: 318-325



DOI: https://doi.org/10.22146/ajche.49741

Article Metrics

Abstract views : 2338 | views : 1447

Refbacks

  • There are currently no refbacks.


ASEAN Journal of Chemical Engineering  (print ISSN 1655-4418; online ISSN 2655-5409) is published by Chemical Engineering Department, Faculty of Engineering, Universitas Gadjah Mada.