Degradation Behavior of Carbon Fiber Reinforced Plastic (CFRP) in Microwave Irradiation

https://doi.org/10.22146/ajche.50139

Nguyen Nguyen(1*), Phuong Ngoc Diem(2), Susan A. Roces(3), Florinda T. Bacani(4), Masatoshi Kubouchi(5), Sakai Tetsuya(6), Piyachat Yimsiri(7)

(1) Chemical Engineering Department,De la Salle University-Manila, Philippines 2401 Taft Avenue, Manila, PHILIPPINES 1004
(2) Chemical Engineering Department,De la Salle University-Manila, Philippines 2401 Taft Avenue, Manila, PHILIPPINES 1004
(3) Chemical Engineering Department,De la Salle University-Manila, Philippines 2401 Taft Avenue, Manila, PHILIPPINES 1004
(4) Chemical Engineering Department,De la Salle University-Manila, Philippines 2401 Taft Avenue, Manila, PHILIPPINES 1004
(5) Chemical Engineering Department, Tokyo Institute of Technology 2-12-1 Ookayama, Meguro-Ku, Tokyo 152-8552, JAPAN
(6) Chemical Engineering Department, Tokyo Institute of Technology 2-12-1 Ookayama, Meguro-Ku, Tokyo 152-8552, JAPAN
(7) Chemical Engineering Department, Burapha University T. Saensook A. Muang Chonburi 20131, THAILAND
(*) Corresponding Author

Abstract


Carbon fiber reinforced plastic (CFRP) composites are being used increasingly not only in strengthening structures of civil infrastructures and aerospace or automotive industries but also in many applications such as in medical fields or chemical plants. The present study relates to resin compositions having beneficial physical and mechanical properties, which may include improved resistance to delamination. This study focused on the different behaviors of CFRP composites when subjected to microwave irradiation. Based on the results of the 3-point bending test and SEM images, the delamination tendencies of breaking the CFRP under microwave were discussed. The results can be summarized as follows: (1) CFRP can be degraded under microwave irradiation; (2) two delamination tendency curves of CFRP by microwave irradiation were observed; (3) only the bending strength values of CFRP decreased with increasing microwave power and residence time; and, (4) the degradation of CFRP by microwave was limited.

Keywords


CFRP, degradation, microwave, and 3-point bending test.

Full Text:

PDF


References

  1. Bisson, McRae, and Shaner. (1993). Non- Incineration Medical Waste Treatment Technologies. Cited in http://www.noharm. org.
  2. Chan, C.T., Tse, V., and Reader, H.C. (2000). Understanding Microwave Heating Cavities. Artech House, Boston, London.
  3. Dae-Cheol, S., and Jung-Ju, L. (1999). “Damage detection of CFRP laminates using electrical resistance measurement and neural network,” Journal of Composites Structure, 47, 525-530.
  4. Dinh, C.V. (2005). Design, fabrication, and testing of microwave pyrolyzer for LDPE and PP medical wastes. Masteral Thesis. De La Salle University, Philippines.
  5. Gabriele, M.D., et al. (2004). “Prospective study on cranioplasty with individual carbon fiber reinforced polymer (CFRP) implants produced by means of stereolithography,” Journal of Surgical Neurology, 62, 510- 521.
  6. Gandhi, Omh. P. (1981). Microwave Engineering and Applications. Pergamon International Library, USA.
  7. Harsany, S.C. (1997). Principles of Microwave Technology. Prentice-Hall, USA.
  8. Jason, M.C.O. (2003). Interaction of Carbon Fiber Reinforced Polymer and Lateral Steel Ties in Circular Concrete Columns as Confinement using Artificial Neural Network. De La Salle University-Manila, Philippines.
  9. JCMA. (2007). The Japan Carbon Fiber Manufacturers Association. Cited in http:// www.carbonfiber.gr.jp/english/.
  10. Kyle, B. (2004). Fiberglass Reinforced Plastic Recycling, Minnesota Technical Assistance Program. Cited in http://www.mntap.umn. edu/fiber/report12-04.pdf. Lance, A.L. (1966). Microwave Experiments. McGraw-Hill, USA.



DOI: https://doi.org/10.22146/ajche.50139

Article Metrics

Abstract views : 1617 | views : 1009

Refbacks

  • There are currently no refbacks.


ASEAN Journal of Chemical Engineering  (print ISSN 1655-4418; online ISSN 2655-5409) is published by Chemical Engineering Department, Faculty of Engineering, Universitas Gadjah Mada.