Base Case Simulation of a Semi-Batch Emulsion Copolymerization Process

https://doi.org/10.22146/ajche.50145

Iwan Harsono(1*), Herman Hindarso(2), Nani Indraswati(3)

(1) Department 01 Chemical Engineering Widya Mandala Surabaya Catholic University Kalijudan37, Surabaya, INDONESIA 01146
(2) Department 01 Chemical Engineering Widya Mandala Surabaya Catholic University Kalijudan37, Surabaya, INDONESIA 01146
(3) Department 01 Chemical Engineering Widya Mandala Surabaya Catholic University Kalijudan37, Surabaya, INDONESIA 01146
(*) Corresponding Author

Abstract


It has been long recognized that emulsion polymerization is a complex heterogeneous process involving transport of monomers and other species and free radicals between aqueous phase and organic phases. Though there are a number of models available in the literature, most of them deal only with specific aspects in emulsion polymerization and are far from being general. To simulate this complicated process and to achieve an adequate level of understanding, a Polymer Plus' software from Aspen Technology, Inc. has been used. The objective of this work is to illustrate the principle use of Polymers Plus' and to simulate and analysis the free-radical seeded emulsion copolymerization of styrene-butadiene process model in a semi-batch reactor. The base case simulation can be used to gain process understanding by analyzing how process variables and operating conditions during the course of a semi-batch reactor affect product quality.

Keywords


Emulsion copolymerization,Polymers Plusa,simulation,semi batch reactor,and styrene / butadiene.

Full Text:

PDF


References

  1. Alhamad, 8., Romagnoli, J. A., Gomes, V.G. (2005). "Advanced modeling and optimal operating strategy in emulsion copolymerization:Applicationto styrene! MMA system," Chem. Eng. Sci., 60, 2795-2813.
  2. Blackley,D.C. (1997). Polymer lattices:Science and technology, Chapman & Hall, London.
  3. Broadhead, T. 0., Hamielec, A. E., MacGregor, J. E (1985). "Dynamic modeling of the batch, semi-batch and continuous production of styrene/butadiene copolymers by emulsion polymerization," Makromolekulare Chemie. Suppl, 10/11, 105-128.
  4. Casella, E. L., et al. (2003). "Mathematical modeling of batch emulsion copolymerization processes," Polymer Reaction Engineering,11,869-910.
  5. Gao, J., Penlidis, A. (2002). "Mathematical modeling and computer simulator/ database for emulsion polymerizations," Prog. Polym. SCL,27, 403-535.
  6. Gilbert,R. G. (1995). Emulsion polymerization. A mechanism approach. Academic Press.
  7. Ginsburger, simulation E., et al. of (2003). batch and "Modelling and semi-batch emulsion copolymerization of styreneand butyl acrylate," Chem. Eng. Sci., 58, 4493-4514.
  8. Gloor, P E., Warner, R. J. (1996). "Developing feed policiesto maximizeproductivityin emulsion polymerization processes," ThennochimicaActa, 289, 243-265.
  9. Harkins, 1428. W. D. (1947). J. Am. Chem. Soc. 69,
  10. Harkins,W.D., (1945).J. Chem. Phys.,13,301.
  11. Lovell, PA., EI-Aaser,M.S. (1997). Emulsion polymerization and emulsion polymers, J. Wiley,NewYork.
  12. Sayer, C., of et al. semicontinuous (2001). "Dynamic optimization emulsion copolymerization: composition and molecular weight distribution," Computers and Chemical Engineering, 25, 839-849.
  13. Sayer, C., Lima, E. L., Pinto, J. C. (1997). "Dynamic modeling of SBR emulsion polymerization reactors refrigerated by thermosyphons, Chern. Eng. Sci., 52, 341-356.
  14. Smith,W.V.,Ewart,R. H. (1948).J. Chern.Phys. 16, 592.
  15. Van Krevelen, D. W. (1990). Properties of polymers, 3rd ed., Elsevier, Amsterdam.
  16. Yabuki,Y, Nagasawa, T., MacGregor, J. F. (2000). "An industrial experience with product quality control in semi-batch processes," Computers & Chemical Engineering,24, 585-590.
  17. Zeaiter,J., Romagnoli, J. A., Barton, G. W., Gomes, V. G., Hawkett, B. S., Gilbert, R. G. (2002). "Operation of semi-batch emulsion polymerization reactors: modeling, validation and effect of operating conditions," Chern.Eng.Sci., 57,2955-2969.



DOI: https://doi.org/10.22146/ajche.50145

Article Metrics

Abstract views : 1832 | views : 1863

Refbacks

  • There are currently no refbacks.


ASEAN Journal of Chemical Engineering  (print ISSN 1655-4418; online ISSN 2655-5409) is published by Chemical Engineering Department, Faculty of Engineering, Universitas Gadjah Mada.