An Improved Method to Calculate the Conservation of Mass in the Simulation of Rapid Pressurization Depressurization in a Packed Bed
Thomas S.Y Chong(1*), William R. Paterson(2), David M. Scott(3)
(1) Corresponding author. Department of Chemical and Environmental Engineering, UniversitiPutra Malaysia, 43400 Serdang,Malaysia.Fax:(603)-86567099
(2) Department of Chemical Engineering, Universityof Cambridge, Pembroke Street, Cambridge, CB2 3RA, U.K.
(3) Department of Chemical Engineering, Universityof Cambridge, Pembroke Street, Cambridge, CB2 3RA, U.K.
(*) Corresponding Author
Abstract
The work described here forms part of a project to model rapid pressure swing adsorption (RPSA), which is a single-bed process used for air separation. We have earlier identified a form of model and boundary conditions for an axially dispersed plug flow model that conserves mass. We solve the RPSA models numerically by spatially discretizing the partial differential equations to a system of ordinary differential equations (ODEs), which are then integrated over time. Although the formulation of our models conserves mass, our numerical simulations, however, do not perfectly conserve mass because of discretization error and rounding error. The discrepancy in the conservation of mass is computed as a guide to the numerical accuracy of the calculations. The computation of the conservation error requires the evaluation of time integrals of molar flowrates in and out of the bed. Since the velocity at the feed end of the bed changes rapidly with time, the application of quadrature to evaluate the time integrals does not provide the accuracy required. In this paper, the inadequacy is demonstrated using a simple problem, i.e. pressurization and depressurization into a non-adsorptive bed. An improved method is proposed. By transforming equations involving time integrals into ODEs, excellent accuracy is obtained. Further, this transformation minimizes the number of decision parameters that need to be specified by the users of the computer programs. Keywords: rapid pressure swing adsorption, modelling and simulation, packed bed.
Keywords
rapid pressure swing adsorption, modelling and simulation, packed bed.
Full Text:
PDFReferences
- Alpay, E., Kenney, C. N. and Scott, D. M., "Simulation of Rapid Pressure Swing Adsorption and Reaction Processes", Chern. Engng Sci. 1993, 48,pp 3173 - 3186.
- Choong, T. S. Y., Paterson, W. R. and Scott, D. M., "AxialDdispersion in Rich, Binary Gas Mixtures:Model Form and Boundary Conditions" , Chern. Engng Sci., 1998, 53, pp 4147 - 4149.
- Rice, R. G. and Do, D. D., Applied Mathematics and Modelling for Chemical Engineers, John Wiley& Sons, U.S.A. (1995).
- Shampire, L. F., Allen, R.C. and Pruess, S., Fundamentals of Numerical Computing, John Wiley& Sons, New York (1997).
DOI: https://doi.org/10.22146/ajche.50800
Article Metrics
Abstract views : 1276 | views : 938Refbacks
- There are currently no refbacks.
ASEAN Journal of Chemical Engineering (print ISSN 1655-4418; online ISSN 2655-5409) is published by Chemical Engineering Department, Faculty of Engineering, Universitas Gadjah Mada.