Sistem Kontrol Torsi pada Motor DC

https://doi.org/10.22146/ijeis.10775

Arifin Wahid Ibrahim(1*), Triyogatama Wahyu Widodo(2), Tri Wahyu Supardi(3)

(1) 
(2) Department of Computer Science and Electronics, Universitas Gadjah Mada
(3) Department of Computer Science and Electronics, Universitas Gadjah Mada
(*) Corresponding Author

Abstract


The use of a DC motor in the industrialized world is very important. Speed of DC motor and torque of DC motor greatly affects quality and quantity of product. Therefore, we need control system of a DC motor that can be set speed and torque. The number of industry players complained about damage to the DC motor because transported load torque of motor exceeds capabilities of torque of DC motor. Based on these problem, we should make torque control system in DC motor.

Torque control system made by regulating armature current of DC motor separately excited with current field  constant condition. Torque control system consist of speed control and current control, namely control system two level. Output signal speed control system will be the current reference signal.

Testing has been carried out with a maximum load of 3690 grams and a nominal current of 0.8 A or nominal torque of 0.323 Nm. The results shows the effective torque of motor is able to be set in the range of 0.182 Nm - 0,243 Nm. Expected to value effective of regulated torque is able to withstand infinite heavy loads without damaging the motor.


Keywords


DC Motor, Speed, Torque

Full Text:

PDF


References

[1] Ibrahim, A. W., 2014, Upgrading Driver Motor DC di Pinch Roll CTCM PT.KS, Krakatau Steel, Cilegon

[2] Frohr, F., 1985, Electronic Control Enginering Made Easy. Siemens Aktiengesellschaft, Berlin dan Munich

[3] Gamayanti, N., 2013, Kontroler Proporsional, http://www.scribd.com/doc/140174192/22-Kontroler-Proporsional-P# diakses pada tanggal 20 Januari 2015

[4] Chairuzzaini, Rusli M., Ariyanto R., 1998, Pengenalan Metode Ziegler-Nichols pada Perancangan Kontroler pada PID, http://elektroindonesia.com/elektro/tutor12.html diakses pada tanggal 3 April 2015

[5] Purnama, A., 2012, Definisi dan Konstruksi Tacho Generator, http://elektronika-dasar.web.id/artikel-elektronika/definisi-dan-konstruksi-tacho-generator/ diakses pada tanggal 20 Januari 2015



DOI: https://doi.org/10.22146/ijeis.10775

Article Metrics

Abstract views : 9242 | views : 30200

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright (c) 2016 IJEIS - Indonesian Journal of Electronics and Instrumentation Systems

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.


Copyright of :
IJEIS (Indonesian Journal of Electronics and Instrumentations Systems)
ISSN 2088-3714 (print); ISSN 2460-7681 (online)
is a scientific journal the results of Electronics
and Instrumentations Systems
A publication of IndoCEISS.
Gedung S1 Ruang 416 FMIPA UGM, Sekip Utara, Yogyakarta 55281
Fax: +62274 555133
email:ijeis.mipa@ugm.ac.id | http://jurnal.ugm.ac.id/ijeis


View My Stats1
View My Stats2