Implementasi Komunikasi Master – Slave pada PLC OMRON CP1H

Galuh Purnama Aji(1*), Bakhtiar Alldino Sumbodo(2)

(1) Prodi Elektronika dan Instrumentasi, DIKE, FMIPA UGM, Yogyakarta
(2) Departemen Ilmu Komputer dan Elektronika, FMIPA UGM, Yogyakarta
(*) Corresponding Author


Almost all factories now use automated system, where the factory using a control system that can do the work itself and the operator are not too play an active role. With a system that runs automatically is expected to yield a production will increase with the quality of the product that generated the same no difference. Common control system used by the company in the form of PLC (Programmable Logic Controller).

            The system uses two OMRON CP1H PLC as drivers and integrated with CX-Designer HMI that communicate through one to one NT link and PLC controlled by CX-Programmer through the communication port USB Peripheral and RS-232. Both the input output PLC connected with USB-OPTO-RLY88 which is integrated with visual studio 2017 software using Host Link communication.

The result of testing a system that compares the response time between communication port USB Peripheral with RS-232 and parallel ladder diagram with sequential ladder diagram, obtained 400 data of response time when the system was working. The result of data comparison tells that USB Peripheral port has a performance about 15% more efficient compared to the RS-232 port.


PLC; HMI; Response Time; RS-232; USB Peripheral; Automatic Drill

Full Text:



V. M. Chadev and N. I. Aristova, "Control of Industrial Automation." Tenth Internatonal Conference Management of Large Scale System Development, 978-1-5386-0798-5, 2017 [On-line]. Available:

A. F. A. Awalludin, "Monitoring and Controlling Double Carriage Elevator System Using CX-Designer and CX-Programmer," 6th Control and System Graduate Research Colloquium, 978-1-4673-6716-5, 2015 [Online]. Available:

F. I. Gumilang, I. Rokhim, Y. Erdani, "Rancang Bangun Jaringan Komunikasi Multi PLC dengan Platform Sistem SCADA-DCS Terintegrasi," Skripsi, Konsentrasi Teknik Mekatronika, Politeknik Manufaktur Negeri Bandung, Bandung, 2015 [Online]. Availab-le:

B. Cristian, O. Constantin, E. Zoltan, P. V. Adina, P. Florica, "The Control of Industrial Process with PLC", ICATE (International Conference on Applied and Theoretical Electricity), 978-1-4799-4161-2, 2014 [Online]. Available:

F. D. Petruzella, Programmable Logic Controllers (4th Editio), New York: Mc Graw Hill, 2011.

A. Fikri, R. Susana, D. Nataliana, “Monitoring Model Sistem Pengepakan dan Penyortiran Barang Berbasis SCADA”, Jurnal Reka Elkomika, Teknik Elektro, Institut Teknologi Nasional Bandung, Bandung, 2014 [Online]. Available:

H. Mandala, H. Rachmat, D. S. E. Atmaja, “Perancangan Sistem Otomatisasi Penggilingan The Hitam Orthodoks Menggunakan Pengendali PLC Siemens S7 1200 dan Supervisory Control and Data Acquisition (SCADA) di PT. Perkebunan Nusantara VIII Rancabali”, Jurnal Tugas Akhir, Fakultas Rekayasa Industri, Universitas Telkom, Bandung. 2015 [Online]. Available:

W. Bolton, “Sebuah Pengantar Programmable Logic Controller (PLC)”, Edisi 3, (diterjemahkan oleh : Harmein, I.), Erlangga, 2004.

G. J. Kereh, H. Rachmat, D. S. E. Atmaja, “Perancangan Program Sistem Otomatisasi pada Stasiun Kerja Pelayuan Menggunakan Pengendali PLC OMRON CP1E di PT. Perkebunan Nusantara VIII Ciater”, Jurnal Tugas Akhir, Fakultas Rekayasa Industri, Universitas Telkom, Bandung. 2015 [Online]. Available:

T. K. Dewi, P. Sasmoko, “Aplikasi Programmable Logic Controller (PLC) OMRON CP1E NA20 DRA dalam Proses Pengaturan Sistem Kerja Mesin Pembuat Pelet Ikan”, Gema Teknologi, Vol. 17, No. 4, Program Studi Diploma III Teknik Elektro, Fakultas Teknik, Universitas Diponegoro, Semarang. 2014 [Online] Available:

M. Rida, F. Liu, Y. Jadi, "Design Mini-PLC based on Atxmega256A3U-AU Microcontr-oller", International Conference on Information Science, 978-1-4799-3197-2, 2014 [On-line]. Available:


Article Metrics

Abstract views : 2616 | views : 3821


  • There are currently no refbacks.

Copyright (c) 2021 IJEIS (Indonesian Journal of Electronics and Instrumentation Systems)

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Copyright of :
IJEIS (Indonesian Journal of Electronics and Instrumentations Systems)
ISSN 2088-3714 (print); ISSN 2460-7681 (online)
is a scientific journal the results of Electronics
and Instrumentations Systems
A publication of IndoCEISS.
Gedung S1 Ruang 416 FMIPA UGM, Sekip Utara, Yogyakarta 55281
Fax: +62274 555133 |

View My Stats1
View My Stats2