Perbedaan Kebocoran Mikro Restorasi Inlei Resin Komposit Menggunakan Resin Semen Dual Cure Yang Berbeda



Rudy Kurniawan(1*), Wignyo Hadriyanto(2), Yulita Kristanti(3)

(1) Program Studi Ilmu Konservasi Gigi, Program Pendidikan Dokter Gigi Spesialis, Fakultas Kedokteran Gigi, Universitas Gadjah Mada, Yogyakarta
(2) Bagian Ilmu Konservasi Gigi, Fakultas Kedokteran Gigi, Universitas Gadjah Mada, Yogyakarta
(3) Bagian Ilmu Konservasi Gigi, Fakultas Kedokteran Gigi, Universitas Gadjah Mada, Yogyakarta
(*) Corresponding Author

Abstract


Resin semen konvensional yang berhubungan dengan teknik total etch dikaitkan dengan insidensi sensitivitas post-operative pada sementasi restorasi indirek. Sebaliknya, resin semen self-adhesive lebih sedikit menyebabkan sensitivitas post-operative terhadap rangsangan dingin. Penelitian ini bertujuan untuk mengetahui perbedaan kebocoran mikro resin semen self-adhesive dengan resin semen konvensional pada sementasi inlei klas I resin komposit
Subjek penelitian sepuluh gigi premolar dibagi menjadi dua kelompok perlakuan yaitu kelompok I untuk sementasi inlei kelas I resin komposit menggunakan resin semen self-adhesive, serta kelompok II, yang disementasi dengan resin semen konvensional. Subjek penelitian disimpan dalam saliva buatan selama 24 jam dalam inkubator suhu 37°C, dilakukan thermocycling masing-masing suhu 60°C dan 4°C setiap 1 menit dan diulang sebanyak 25 kali. Tes kebocoran mikro dilakukan dengan cara subjek penelitian direndam dalam larutan biru metilen 2% di dalam inkubator suhu 37°C selama 24 jam kemudian disentrifus kecepatan 3000 rpm selama 5 menit. Subjek penelitian dibelah menjadi dua bagian dengan separating disc secara vertikal arah mesiodistal, hasil belahan diamati dibawah mikroskop stereo perbesaran 250 kali. Penilaian dengan cara skor kebocoran mikro 0-3. Analisis data dengan uji U-Mann Whitney.
Hasil penelitian menunjukkan tidak terdapat perbedaan kebocoran mikro restorasi inlei resin komposit menggunakan resin semen dual cure yang berbeda.
Kesimpulan penelitian ini tidak terdapat perbedaan kebocoran mikro restorasi inlei resin komposit menggunakan resin semen dual cure yang berbeda

ABSTRACT
Conventional resin cement which associated with total etch technique linked with the incidence of  post operative sensitivity on cementation of indirect restoration. Conversely, self-adhesive resin cement caused less incidence of post operative sensitivity toward cold stimulation. The aim of this study was investigating the difference of microleakage between self-adhesive and conventional resin cement on cementation of class I composite resin inlay cementation.
Ten human extracted premolar teeth were randomly divided into two groups, group I, for cementation class I composite resin inlay using self-adhesive resin cement, then group II for cementation using conventional resin cement. Specimens were stored in artificial saliva for 24 hours at 37°C incubator, thermocycled at  60°C and 4°C each for 1 minute dan repeated 25 times then immersed in 2% methylene blue dye for 24 hours at 37°C incubator and centrifuged for 5 minutes at 3000 rpm. Specimens cut into two pieces with separating disc vertically in mesiodistal direction, and dye penetration was assessed using stereo microscope 250 magnification according to 0-3 scoring point. Data was analyzed using U-Mann Whitney tests at d”0.05 significance level and 95% confidence level.
The results of the study showed that there was no difference of microleakage of composite resin inlay restoration using different dual cure resin cement.
The conclusion of the study that there was no difference of microleakage of composite resin inlay restoration using different dual cure resin cement.


Keywords


inlei resin komposit, resin semen, kebocoran mikro,composite resin inlay, resin cement, microleakage

Full Text:

PDF


References

Soares, C.J., Martins, L.R., Fernandes Neto, A.J., Giannini, M., 2003, Marginal Adaptation of Indirect Compositesand Ceramic Inlay Systems, Oper Dent, 28:689-694

Bott, B., Hannig, M., 1995, Optimizing Class II Composite Resin Esthetic Restorations By Use of Ceramic Inserts, J Esthet Dent, 7:110-117

Braga, R.R., Boaro, L.C.C., Kuroe, T., Azwvedo, C.L.N., Singer,J.M., 2006, Influence of Cavity Dimensions and Their Derivatives (Volume and ‘C’ Factor) on Shrinkage Stress Development and Microleakage of Composite Restorations, Dental Materials, 22:818-823

Davidson, C. L., Van Zeghbroek, L., Feilzer, A. J., 1991, Destructive Stresses In Adhesive Luting Cements, Journal of Dental Research, 70: 880882

Kleverlaan, C.J., Feilzer, A.J., 2005, Polymerization Shrinkage and Contraction Stress of Dental Resin Composites, Dental Materials, 21: 1150-1157

Feilzer, A.J., de Gee,A.J., Davidson, C.L., 1987, Setting Stress in Composite Resin in Relation to Configuration of The Restoration, Journal of Dental Research, 66:1636-639

Roberson, T.M., Heyman, H.O., Swift, E.J., 2006, Art and Science of Operative Dentistry, 5

ed., Mosby, St Louis, 500-502, 504-505

th

Feilzer, A.J., de Gee,A.J., Davidson, C.L.,1993, Setting Stresses In Composites For Two Different Curing Modes, Dental Materials, 9: 2-5

Tanoue, N., Koishi, Y., Atsuta, M., Matsumura, H., 2003, Properties of Dual-curable Luting Composites Polymerized With Single And Dual Curing Modes, J Oral Rehabil., 30: 1015-1021

Arrais, C. A., Rueggeberg, F.A., Waller, J. L., de Goes, M.F., Giannini, M., 2008, Effect of Curing Mode On The Polymerization Characteristics Of Dual-cured Resin Cement Systems, 36: 418-426

Asmussen, E., Peutzfeldt, A., 2006, Bonding of Dual-curing Resin Cements To Dentin, J Adhes Dent, 8: 299-304

Spinell, T., Schedle, A., Watts, D.C., 2009, Polymerization Shrinkage Kinetics of Dimethacrylate Resin Cements, Dental Materials, 25: 1058-1066

Christensen, G.J., 2002, Solving The Frustations of Crown Cementation, JADA, 133: 1121-1122

Sensat, M.L., Bracket, W.W., Meinberg, T.A., Beatty, M.W., 2002, Clinical Evaluation of Two Adhesive Composite Cements For The Suppression of Dentinal Cold Sensitivity, Journal of Prosthetic Dentistry, 88:50-53

Monticelli, F., Osorio, R., Mazzitelli, C., Ferrari, M., Toledano, M., 2008, Limited Decalcification/

Diffusion of Self-adhesive Cements Into Dentin, Journal of Dental Research, 87(10): 974-979

Bauer, J.G., Henson, J.L., 1984, Microleakage: A Measure of The Performance of Direct Filling Materials, Oper Dent, 9:2-9

Civelek, A., Ersoy, M., L’Hotelier, E., Soyman, M., Say, E.C., 2003, Polymerization Shrinkage and Microleakage in Class II Cavities of Various Resin Composites, Oper Dent, 28(5): 635-641

Porte, A., Lutz, F., Lund, M.R., Swartz, M.L., Cocharan, M.A., 1984, Effect of Thermal Cycling on Fracture Strength and Microleakage in Teeth Restored With a Bonded Composite Resin, Dent Mater, 2(3):114-117

Kitzmuller, K., Graf, A., Watts, D., Schedle, A., 2011, Setting Kinetics And Shrinkage of Selfadhesive

Resin Cements Depend On Cure Mode And

Temperature,

Dental Materials,

: 544-551

Duarte, R. M., de Goes, M, F., Montes, M. A., 2006, Effect of Time On Tensile Bond Strength of Resin Cement Bonded To Dentin And Low-viscosity Composite, Journal of Dentistry, 34 (1): 52-61

Tay,F.R.,Pashley,D.H.,2003,Water Treeing A Potential Mechanism For Degradation of Dentin Adhesives, Am Journal of Dentistry, 16: 6-12

Anusavice, K.J., 2004, Philip’s Buku Ajar Ilmu Bahan Kedokteran Gigi (terj), ed 10, EGC, Jakarta, h.449-487.

Dietschi,D.,Krejci,I., 2001, Adhesive Restorative In Posterior Teeth: Rationale for the Application of Direct Techniques, Oper.Dent., 6:191-197

De Munck, J., Vargas, M., Van Landuyt, K. L., Hikita, K., Lambrechts, P., Van Merbeek, B., 2004, Bonding of An Auto-adhesive Luting Material to Enamel and Dentin, Dent Mater., 20: 963-971

Abo-Hamar, S.E., Hiller, K.A., Jung, H., Federlin, M., Friedl, K.H., Schmalz, G., 2005, Bond Strength of A New Universal Self-adhesive Resin Luting Cement to Dentin and Enamel, Clin. Oral Invest., 9: 161-167

Pereira, P.N., Okuda, M., Sano, H., Yoshikawa, T., Burrow, M.F., Tagami, J., 1999, Effect of Intrinsic Wetness And Regional Difference On Dentine Bond Strength, Dental Materials, 15:46-53

Pfeifer, C., Shih, D., Braga, R.R., 2003, Compatibility of Dental Adhesives And Dual-cure Cements, Am.Journal of Dent., 16:235-238

Sanar es, A. M. F. , I t t hagar un, A. , Ki ng, N.M.,Tay,F.R.,Pashl ey,D.H., 2001, Adverse Surface Interactions Between One-bottle Lightcured Adhesives

And Chemical-cured composites, Dent Materials,17:542-556

Merbeek, V. B., Landuyt, K.V., Munk, J.D., Peumans, M., 2006, The Unique Concept of a HEMA-Free Adhesive, Department of Conservative Dentistry, Belgium

El Zohairy, A.A., De Gee, A.J., Mohsen, M.M., Feilzer, A.J., 2003, Effect of Conditioning Time of Self-etching Primers On Dentin Bond Strength of Three Adhesive Resin Cements, Dental Materials, 21:83-93

Begazo, C. C., de Boer, H. D., Kleverlaan, C. J., van Waas, M. A. J., Feilzer, A. J., 2004, Shear Bond Strength of Different Types of Luting Cements to An Aluminium Oxide-Reinforced Glass Ceramic Core Material, Dent Mater., 20: 901-7

Atai, M., Watts, D.C., 2006, A New Kinetic Model For The Photopolymerization Shrinkage-strain of Dental Composites And Resin-monomers, Dental Materials, 22:785-791

Satterthwaite, J.D., Vogel, K., Watts, D.C., 2009, Effect of Resin Composite Filler Particle Size And Shape On Shrinkage Strain, Dental Materials, 25:1612-2161

Garcia, R. N., Reis, A. F., Giannini, M., 2007, Effect of Activation Mode of Dual-cured Resin Cements And Low-viscosity Composite Liners On Bond Strength To Dentin, Journal of Dentistry, 35: 564-569

Meerbeek, V. B., Vargas, M., Inoue, S., Yoshida, Y., Peumans, M., Lambrechts, P., 2001, Adhesives and Cements To Promote Preservation Dentistry, Oper. Dent., 6: 119-144

Shafiei, F., Memarpour, M., Doozandeh, M., 2012, Effect of Oxalate Desensitizer On The Bonding Durability of Adhesive Resin Cements To Dentin, Journal of Prosthodontic Research, 56: 187-193

Sadeghi, M., 2009, Influence of Flowable Materials on Microleakage of Nanofilled and Hybrid Class II Composite Restorations with LED and QTH LCUs, http://ijdr.in/text.asp

Craig, R.G., dan Powers, J.M., 2002, Restorative Dental Material, 11

ed., Mosby Inc., St. Louis, h. 234, 237, 273, 276.

th

Ziskind, D., Adell, I., Teperovich, E., dan Peretz, B., 2005, The Effect of an Intermediate Layer of Flowable Composite Resin on Microleakage in Packable Composite Restorations, International Journal of Pediatric Dentistry, 15: 349-354

Lindberg, A., Van Dijken, J.V.W., Horstedt, P., 2005, In Vivo Interfacial Adaptation of Class II Resin Composite Restorations With and Without a Flowable Resin Composite Liner, Clin Oral Invest, 9:77-83

Beznos, C., 2001, Microleakage at the Cervical Margin of Composite Class II Cavities with Different Restorative Technique, Oper Dent, 26: 60-69



Article Metrics

Abstract views : 2754 | views : 11788

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Jurnal Kedokteran Gigi



Currently, Jurnal Kedokteran Gigi dexed by: