Proses Fabrikasi dan Sifat Mekanik Komposit Polimer dengan Metode Bladder Compression Moulding
Gesang Nugroho(1*), Muhammad Syahrul Ramadhan R. Wantogia(2)
(1) Departemen Teknik Mesin dan Industri Fakultas Teknik Universitas Gadjah Mada Yogyakarta 55281, Indonesia Telp. (0274) 521673
(2) 
(*) Corresponding Author
Abstract
Full Text:
PDFReferences
A. Goren and C. Atas, "Manufacturing of Polymer Matrix Composites using Vacuum Assisted Resin Infusion Molding," International Scientific Journal, World Academy of Materials and Manufacturing Engineering, vol. 34, no. 2 (2008) pp. 117-120.
A. Hammami and A. Al-Zarouni, "Investigation of the RTM / Bladder Molding Process," in International Committee on Composite Materials, Beijing, 2001.
E. Sevkata and M. Brahimib, "The Bearing Strength of Pin Loaded Woven Composites Manufactured by Vacuum Assisted Resin Transfer Molding and Hand Lay-up Techniques," Elsevier, Procedia Engineering, vol. 10 (2011) pp. 153-158.
H. Rahmani, S. H. M. Najafi and A. Ashori, "Mechanical performance of epoxy/carbon," Journal of Reinforced Plastics & Composites, vol. 33, no. 8 (2014) pp. 733-740.
J. P. Anderson and M. C. Altan, "Bladder Assisted Composite Manufacturing (BACM): Challenges and Opportunities," in Polymer Processing Society Europe-Africa Conference, Tel Aviv, 2014.
J. P. Anderson and M. C. Altan, "Properties of Composite Cylinders Fabricated by Bladder Assisted Composite Manufacturing," ASME, Journal of Engineering Materials and Technology, vol. 134, no. 4, 2012.
J. P. Anderson, A. J. Kelly and M. C. Altan, "Fabrication of Composite Laminates by Vacuum-Assisted Resin Transfer Molding Augmented with an Inflatable Bladder," in American Society for Composites 28th Technical Conference, Pennsylvania, 2013.
J. Zhang, K. Chaisombat, S. He and C. H. Wang, "Hybrid Composite Laminates Reinforced with Glass/Carbon Woven Fabrics for Light Weight Load Bearing Structures," Elsevier, Material and Design, vol. 36, (2012) pp. 75-80.
L. Hamill, T. Centea and S. Nutt, "Surface Porosity During Vacuum Bag-only Prepreg Processing: Causes and Mitigation Strategies," Elsevier, Composites Part A: Applied Science and Manufacturing, vol. 75 (2015) pp. 1-10.
M. N. Gururaja and A. N. Hari Rao, "A Review on Recent Applications and Future Prospectus of Hybrid Composites," International Journal of Soft Computing and Engineering (IJSCE), vol. 1, no. 6, January 2012, pp. 352-355.
M. N. Gururaja and A. N. Hari Rao, "Effect of An Angle-ply Orientation on Textile Properties of Kevlar/Glass Hybrid Composites," International Journal on Theoratical and Applied Research in Mechanical Engineering, vol. 2, no. 3 (2013), pp. 63-67.
Mardiyati, "Komposit Polimer sebagai Material Tahan Balistik," Jurnal Inovasi Pertahanan dan Keamanan, vol. 1, no. 1, Februari 2018, pp. 20-28.
O. Guiraud , P. J. Dumont, L. Orgéas and D. Favier , "Rheometry of compression moulded fibre-reinforced polymer composites: Rheology, compressibility, and friction forces with mould surfaces," Elsevier, Composites Part A: Applied Science and Manufacturing, vol. 43, no. 11 (2012) pp. 2107-2119.
R. Yosoyima, K. Morimoto, T. Susuki, A. Nakajima and Y. Ikada , Adhesion and Bonding in Composites, New York: Marcel Dekker Inc., 1990.
T. D. Jagannatha and G. Harish, "Mechanical Properties of Carbon/Glass Fiber Reinforced Epoxy Hybrid Polymer Composites," International Journal of Mechanical Engineering and Robotics Research, vol. 4, no. 2, April 2015.
T. Hou and B. J. Jensen, Evaluation of Double-Vacuum-Bag Process For Composite Fabrication, Virginia: NASA Langley Research Center, 2004.DOI: https://doi.org/10.22146/jmdt.53047
Article Metrics
Abstract views : 12407 | views : 18112Refbacks
- There are currently no refbacks.