Preliminary Design of Electric Linear Actuator for Hospital Bed Domestic Product

https://doi.org/10.22146/jmdt.63146

Setiyo Hermawan(1*), Heru S.B. Rochardjo(2)

(1) Universitas Muhammadiyah Pekajangan Pekalongan. Jl. Pahlawan No. 10 Gejlig Kajen Pekalongan Jawa Tengah Indonesia 51161
(2) Departemen Teknik Mesin dan Industri, Fakultas Teknik, Universitas Gadjah Mada Jl. Grafika 2, Yogyakarta 55281, Indonesia
(*) Corresponding Author

Abstract


Nowadays, the need for linear actuator as a component of a hospital bed is increasing due to the growing needs of electric bed. The function of this component is to adjust the form of the bed for the patient’s comfort. However, the producers of the local hospital bed mostly rely on foreign products. To reduce the production cost, an effort was made to design a low cost yet functional electric linear actuator. The actuator using basic components, consists of a DC motor, transmission, and screw mechanism. Stainless steel pipe with outer diameter of 26 mm was used for the body of the actuator. The performance of the actuator was tested by applying gradual loading with variations on the stroke. It was shown that the the actuator works well in varying loads from 0 to 150 kg with varying stroke from 0 to 19 cm.


Keywords


Hospital bed, electric linear actuator, screw mechanism

Full Text:

PDF


References

Budynas, R.G., and Nisbett, J.K., 2011, “Shigley’s Mechanical Engineering Design Ninth Edition.”, Mc Graw Hill, New York.

Dacapo Stainless, 2018 “Nominal Pipe Sizes,Pipe Dimensions, Imperial/Metric Pipe Chart”, Netherland.

Enrici, P., Dumas, F., Ziegler, N., and Matt, D., 2016, “Design of a High – Performance Multi – Air Gap Linear Actuator for Aeronautical Applications”, Volume 31 No. 3, IEEE Transactions on Energy Conversion.

Kemenperin, 2009, Peraturan Menteri Perindustrian Republik Indonesia Nomor 49/M-IND/PER/5/2009, tentang “Pedoman Penggunaan Produk Dalam Negeri dalam Pengadaan Barang dan Jasa Pemerintah.”, Jakarta.

Kharagpur, 2015, “Module 6 Power Screw – Lesson 1 Power Screw Drives and Their Efficiency”, India.

Khidr, EA., Mohamed, NA., Nor, MJM., and Mustafa, MM., 2007, “A New Concept of a Linear Smart Actuator”, Sensor and Actuators, A 135, 244 – 249, Elsevier.

Kohara Gear Industry, 2015, “Katalog Steel Bevel Gears Modul 1 – 8”, Nakacho Kawaguchi-shi Saitama-ken Japan.

Lolita, Sella, Nurhayati, and Kusworini, Dyah, (2017), Analisis Kebutuhan Tempat Tidur Tiap Kelas di Unit Rawat Inap Rumah Sakit Djatiroto Kabupaten Lumajang, Artikel Ilmiah Hasil Penelitian Mahasiswa, Universitas Jember

Paramount Bed Indonesia, 2018, “Produk Rumah Sakit ICU Bed PA-66250DX”, Jakarta.

Peng Y., Cao, Jie, Guo Zhao and Yu Haoyong (2015), A linear actuator for precision positioning of dual objects, Smart Materials and Structures 24(12):125039

Yunus, A.D., 2010, “Diktat Mekanika Kekuatan Material”, Program Studi Teknik Mesin, Universitas Darma Persada, Jakarta.



DOI: https://doi.org/10.22146/jmdt.63146

Article Metrics

Abstract views : 1976 | views : 2195

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.