A Structural Design of COVID-19 Patient Lifting Device Using Crane and Hydraulic Mechanism

https://doi.org/10.22146/jmdt.65687

Dindamilenia Choirunnisa Hardiyasanti(1*), Sinta Widianingrum(2), Fini Bestiara(3), Mei Syaroh(4), Farid Triawan(5)

(1) Department of Mechanical Engineering, Faculty of Engineering and Technology, Sampoerna University, Jakarta, Indonesia dan Department of Aerospace and Mechanical Engineering, The University of Arizona, Tucson, AZ, 85721, USA.
(2) Department of Mechanical Engineering, Faculty of Engineering and Technology, Sampoerna University, Jakarta, Indonesia dan Department of Aerospace and Mechanical Engineering, The University of Arizona, Tucson, AZ, 85721, USA.
(3) Department of Mechanical Engineering, Faculty of Engineering and Technology, Sampoerna University, Jakarta, Indonesia dan Department of Aerospace and Mechanical Engineering, The University of Arizona, Tucson, AZ, 85721, USA.
(4) Department of Mechanical Engineering, Faculty of Engineering and Technology, Sampoerna University, Jakarta, Indonesia dan Department of Aerospace and Mechanical Engineering, The University of Arizona, Tucson, AZ, 85721, USA.
(5) Department of Mechanical Engineering, Faculty of Engineering and Technology, Sampoerna University, Jakarta, Indonesia dan Department of Aerospace and Mechanical Engineering, The University of Arizona, Tucson, AZ, 85721, USA.
(*) Corresponding Author

Abstract


COVID-19 has brought the mankind into the worst condition. The health care workers as the forefront player during this pandemic are psychology and physically exhausted. In 2021, the infected patient is decreasing in some countries, yet increasing in others. Therefore, this study is aimed to design and analyze a patient lifting device in order to help the health workers in handling paralyzed and bone traumatic patients in effective way. This lifting device is designed to be operated by only one person and contactless with the patient. Thus, the healthcare worker can work on safety procedure of COVID-19. The structural design of the device is using the concept of crane and hydraulic mechanism that can handle a maximum weight of 2,000 N. Every mechanical part that is considered critical becomes the focus in the strength analysis. The analysis is done by theoretical approach under static and dynamic loading. As the results, the static and fatigue analyses show that the most critical part of the lifting device is at the fork structure with safety factor of 1.04. This indicates the design is in safety condition and could have an infinite service life cycle.

 


Keywords


Lifting device; COVID-19 patient; Structural design; Strength analysis; Static and Fatigue.

Full Text:

PDF


References

Aljohani, W. A., & Pascua, G. P. (2019). Impacts of Manual Handling Training and Lifting Devices on Risks of Back Pain among Nurses: An Integrative Literature Review. Nurse Media Journal of Nursing, 9(2), 210–230. https://doi.org/10.14710/nmjn.v9i2.26435

Badaruddin, M., Sugiri, A., & Wang, C. J. (2020). An experimental investigation of the mechanical strength of cold-drawn AISI 1018 steel under high-temperature steady- and transient-state conditions. Construction and Building Materials, 232, 117193. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.117193

Budiman, B. A., Sambegoro, P. L., Rahardian, S., Ilhamsyah, R., Firmansyah, R., Juangsa, F. B., & Aziz, M. (2020). Prediction of the remaining service lifetime of inflatable rubber dam with deep hole damage. Indonesian Journal of Science and Technology, 5(3), 366–381. https://doi.org/10.17509/ijost.v5i3.24936

Gholami, M., Fawad, I., Shadan, S., Rowaiee, R., Ghanem, H. A., Hassan Khamis, A., & Ho, S. B. (2021). COVID-19 and healthcare workers: A systematic review and meta-analysis. International Journal of Infectious Diseases, 104, 335–346. https://doi.org/10.1016/j.ijid.2021.01.013

Gorkunov, E. S., Zadvorkin, S. M., Goruleva, L. S., Makarov, A. V, & Pecherkina, N. L. (2017). Structure and mechanical properties of a high-carbon steel subjected to severe deformation. Physics of Metals and Metallography, 118(10), 1006–1014. https://doi.org/10.1134/S0031918X17100076

Iswanto, W. D. P. P. T. (2020). Analisis Kegagalan Poros Shipping Pump Pada Anjungan Produksi Minyak dan Gas Bumi Lepas Pantai. 2(2), 137–146.

Khoiriyah, N., Alfatih, S. A., Munir, M., & Triawan, F. (2021). Component Design and Strength Analysis of Coffin Lowering Machine for COVID-19 Corpse : A Problem-Based Learning. x, 137–150.

Misnaniarti, M., Hidayat, B., Pujiyanto, P., Nadjib, M., Thabrany, H., Junadi, P., Besral, B., Purwoko, B., Trihono, T., & Yulaswati, V. (2018). Ketersediaan Fasilitas dan Tenaga Kesehatan Dalam Mendukung Cakupan Semesta Jaminan Kesehatan Nasional. Jurnal Penelitian Dan Pengembangan Pelayanan Kesehatan, 1(1), 6–16. https://doi.org/10.22435/jpppk.v1i1.425

Muryanti, L., Fitria, L. N., Hanaya, G., & Triawan, F. (2021). ASEAN Journal of Science and Engineering Foldable Bed Design Concept for COVID-19 Patient : A Machine Design Case Study. 1(2), 127–140.

Nurhafizhoh, F. H. (2019). Perbedaan Keluhan Low Back Pain Pada Perawat Rawat Inap, Rawat Jalan, Dan IGD Di Rumah Sakit Islam Jakarta Cempaka Putih. ISSN 2502-3632 (Online) ISSN 2356-0304 (Paper) Jurnal Online Internasional & Nasional Vol. 7 No.1, Januari – Juni 2019 Universitas 17 Agustus 1945 Jakarta. http://lib.unnes.ac.id/35681/1/6411415121_Optimized.pdf

Oktamianti, P., & Pebrina, A. (2019). Kajian Kebutuhan Pengembangan Rumah Sakit Pemerintah Daerah Kelas B di Provinsi Sulawesi Utara. Jurnal ARSI, 5(2), 59–71.

Oktaviandri, M., & Paramasivam, D. K. A. V. (2020). Design and Fabrication of Customized Ais Kacang Vending Machine. Indonesian Journal of Computing, Engineering and Design (IJoCED), 2(1), 24. https://doi.org/10.35806/ijoced.v2i1.100

Pal, R., & Yadav, U. (2021). Resurgence of COVID-19 in India: Time for introspection. Postgraduate Medical Journal, 10–11. https://doi.org/10.1136/postgradmedj-2021-140410

Pookarath, H. H., & Parameswaran, M. (2018). Design of Equipments that helps in Patient Transferring. July, 1967–1969.

R. G. Budynas, J. K. Nisbett, and J. E. Shigley. Shigley’s Mechanical Engineering Design Tenth Edition. New York, NY: McGrawHill Education, 2020.

Rusca Putra, K., & Setyowati. (2019). Prevalence of burnout syndrome among nurses in general hospitals in provincial East Java: Cross-sectional study. Enfermeria Clinica, 29(July), 362–366. https://doi.org/10.1016/j.enfcli.2019.04.045

Saptaji, K., Afiqah, S. N., & Ramdan, R. D. (2019). A Review on Measurement Methods for Machining Induced Residual Stress. Indonesian Journal of Computing, Engineering and Design (IJoCED), 1(2), 106. https://doi.org/10.35806/ijoced.v1i2.64

Widiyanti, E., Basuki, E., & Jannis, J. (2011). Lifting and Transferring Patient as Risk Factors for Low Back Pain among Female Nurses. Journal of the Indonesian Medical Association, 59

Zulaikah, S., Rahmanda, W. H., & Triawan, F. (2020). Foldable Front Child-Seat Design for Scooter Motorcycle: Strength Analysis Under Static and Dynamic Loading. Internatioal Journal of Sustainable Transportation Techology, 3(2), 37-44



DOI: https://doi.org/10.22146/jmdt.65687

Article Metrics

Abstract views : 741 | views : 724

Refbacks

  • There are currently no refbacks.