Desain Material Sweeper Untuk Kendaraan Penghisab Debu Vulkanik

https://doi.org/10.22146/jntt.42720

Wikan Sakarinto(1*), Andhi Akhmad Ismail(2), Andi Pratama(3), Putri Chairany(4)

(1) Departemen Teknik Mesin, Sekolah Vokasi UGM
(2) Departemen Teknik Mesin, Sekolah Vokasi UGM
(3) Departemen Teknik Mesin, Sekolah Vokasi UGM
(4) Departemen Teknik Mesin, Sekolah Vokasi UGM
(*) Corresponding Author

Abstract


In overseas, the road sweeper have been producted.  But, the expensive of import tax will befundamental problem for realisation the road sweeper from the overseas. The goal of this observationis making the the road sweeper which will be raised the amout in the future according UGM needed.And the part of  the road sweeper is the sweeper itself. The problem which has been observated isgiving the proper testing for steel wire as the based material in making a sweeper. Because of that,for knowing the proper testing in the steel wire, then doing observation which has given a differenttreatment. As the component which has the work with lots of friction, so the sweeper must have highhardness, high wear resistance, and high tensile strength. Based on the result of spectrometer analiticreport which was did in science and accelerator technology laboratory-  BATAN. Based on the resultpicture of micro sweeper structur observation with material stainless steel in litterature has asimilarity with the picture of austenite and ferrite micro structure which has several   overages,especially in strength and high resistance to intergranular corrosion.

Keywords


sweeper; microstructure test; stainless steel; road sweeper vehicle

Full Text:

PDF


References

ASM Handbook, Volume 23: Materials for Medical Devices. 2003 Augustine, Fitri Dwi. 2015. Analisa Keausan Material Crusher Batubara. Departemen Teknik Mesin Sekolah Vokasi Universitas Gadjah Mada Djaprie, Dr. Ir. Sriati. 1991. Dasar Metalurgi Untuk Rekayasawan, PT. Gramedia Pustaka Utama, Jakarta. Lippold, J.C.and Kotecki, D.J. 2005. Welding Metallurgy and Weldability of Stainless Steels Seitovirta, Mika. 2013. Handbook of Stainless Steel. Sandvikens Tryckeri. Sweeden. Sudira T., Saito S. 1992. Pengetahuan Bahan Teknik. Erlangga. Jakarta Varney, Wilbur R. and Clark, Donald S. 1952. Physical Metallurgy for Engineers



DOI: https://doi.org/10.22146/jntt.42720

Article Metrics

Abstract views : 1685 | views : 2334

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Jurnal Nasional Teknologi Terapan (JNTT)

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal Nasional Teknologi Terapan Indexed by:


  

Web
AnalyticsView My Stats