Analisis Pengaruh Proses Brazing Kuningan Terhadap Perubahan Sifat Mekanis dari Pipa Baja Karbon Rendah

Mardiana Mardiana(1*), Djoko W. Karmiadji(2)

(*) Corresponding Author


Low carbon steel has suitable physical properties such as: easily to be casted, welded and
machined. Generally, this steel is used for construction, hospital and house hold equipment, and
so on. Some equipment structures employ low carbon steel pipe for basic construction, in which
a lot of brazing joins are applied for connecting each pipe to form a house hold or hospital
equipment. This research analyzes the brazing methode, since it is commonly used to obtain
smoother joint surface compared with the other method and having lower melting temperature
than the pipe. The analysis emphasizes the transformation of mechanical characteristics such
as: tensile strength, hardness, micro and macro structures. The result of this research shows
that the maximum tensile strength is 509 N/mm2 when the welded groove is 0,5 mm, or 2,35%
greater than welded metal strength, and 12,5% less than base metal strength. The hardness
values are decreasing compared with the base metal, i.e., 18,5% of average, 18,57% at HAZ
(Heat Afffected Zone), and 19,81% of pipe metal under the value of base metal.
Kata kunci: Brazing, pipa baja karbon rendah, sifat mekanis

Full Text:


Article Metrics

Abstract views : 944 | views : 5290


  • There are currently no refbacks.

Copyright (c)