Effect of light-curing techniques and preheated composite types as luting agents on lithium disilicate bond strength

https://doi.org/10.22146/majkedgiind.104948

Wanda Septya Ekatra(1*), Tri Endra Untara(2), Diatri Nari Ratih(3)

(1) Conservative Dentistry Specialist Program, Faculty of Dentistry, Universitas Gadjah Mada, Yogyakarta, Indonesia
(2) Department of Conservative Dentistry, Faculty of Dentistry, Universitas Gadjah Mada, Yogyakarta, Indonesia
(3) Department of Conservative Dentistry, Faculty of Dentistry, Universitas Gadjah Mada, Yogyakarta, Indonesia
(*) Corresponding Author

Abstract


he bond strength between lithium disilicate veneers and tooth structure depends on factors such as curing technique and luting agent. Preheated composite resins have been proposed as alternative luting agents due to their favorable mechanical and polymerization properties. This study aimed to evaluate the effects of conventional, ramp, and pulse light-curing techniques on the shear bond strength of lithium disilicate when preheated microhybrid and nanohybrid composite resins were used as luting agents.  Forty-two maxillary premolars were prepared and randomly assigned to six groups (n = 7) based on the combination of luting agent and light-curing technique: IA (microhybrid–conventional), IB (microhybrid–ramp), IC (microhybrid–pulse), IIA (nanohybrid–conventional), IIB (nanohybrid–ramp), and IIC (nanohybrid–pulse). Lithium disilicate veneers were cemented accordingly, and shear bond strength was evaluated. Results from a two-way ANOVA indicated a significant effect of the type of preheated composite resin on the shear bond strength of lithium disilicate (p < 0.05), while no significant effect of light-curing technique was observed (p > 0.05). This study confirmed that preheated microhybrid composite resin produces greater shear bond strength compared to preheated nanohybrid composite resin. Light-curing technique does not significantly affect the shear
bond strength of lithium disilicate.


Keywords


cementation; light-curing; preheated composite resin; shear bond strength



References

  1. Alothman Y, Bamasoud MS. The success of dental veneers according to preparation design and material type. Open Access Maced J Med Sci. 2018; 6(12): 2402-2408. doi: 10.3889/oamjms.2018.353
  2. Ciocan-Pendefunda AA, Martu MA, Antohe ME, Luchian I, Martu I, Sioustis I, Ifteni G. Indirect composite veneers as a social therapeutic solution. A case report. Romanian Journal of Oral Rehabilitation. 2018; 10(4): 91-96.
  3. Garg N, Garg A. Textbook of Operative Dentistry, 4th ed. New Delhi: Jaypee; 2021.
  4. Malchiodi, L, Zotti F, Moro T, De Santis D, Albanese M. Clinical and esthetical evaluation of 79 lithium disilicate multilayered anterior veneers with a medium follow-up of 3 years. Eur J Dent. 2019; 13(4): 581-588. doi: 10.1055/s-0039-1700371
  5. Lopes LCP, Terada RSS, Tsuzuki FM, Giannini M, Hirata R. Heating and preheating of dental restorative materials-a systematic review. Clinical Oral Investigations. 2020; 24(12): 4225-4235. doi: 10.1007/s00784-020-03637-2
  6. Mutlu A, Atay A, Çal E. Bonding effectiveness of contemporary materials in luting glass-ceramic to dentine: an in vitro study. Journal of Advanced Oral Research. 2021; 12(1): 103-111. doi: 10.1177/2320206820973496
  7. Tomaselli LO, Oliveira DCRS, Favarão J, Silva AFD, Pires-de-Souza FCP, Geraldeli S, Sinhoreti MAC. Influence of pre-heating regular resin composites and flowable composites on luting ceramic veneers with different thicknesses. Brazilian Dental Journal. 2019; 30(5): 459-466. doi: 10.1590/0103-6440201902513
  8. Gugelmin BP, Miguel LCM, Baratto Filho F, Cunha LFD, Correr GM, Gonzaga CC. Color stability of ceramic veneers luted with resin cements and pre-heated composites: 12 months follow-up. Brazilian Dental Journal. 2020; 31(1): 69-77. doi: 10.1590/0103-6440202002842
  9. Kramer MR, Edelhoff D, Stawarczyk B. Flexural strength of preheated resin composites and bonding properties to glass-ceramic and dentin. Materials (Basel, Switzerland). 2016; 9(2): 83. doi: 10.3390/ma9020083
  10. Coelho NF, Barbon FJ, Machado RG, Boscato N, Moraes RR. Response of composite resins to preheating and the resulting strengthening of luted feldspar ceramic. Dental Materials: Official Publication of the Academy of Dental Materials. 2019; 35(10): 1430-1438. doi: 10.1016/j.dental.2019.07.021
  11. Sakaguchi R, Ferracane J, Powers J. Craig’s restorative dental materials, 14th Ed. Missouri: Elsevier Inc.; 2019.
  12. Soares CJ, Faria-E-Silva AL, Rodrigues MP, Vilela ABF, Pfeifer CS, Tantbirojn D, Versluis A. Polymerization shrinkage stress of composite resins and resin cements - What do we need to know? Brazilian Oral Research. 2017; 31(suppl 1): e62. doi: 10.1590/1807-3107BOR-2017.vol31.0062
  13. Fidalgo-Pereira R, Torres O, Carvalho Ó, Silva, FS, Catarino SO, Özcan M, Souza JCM. A scoping review on the polymerization of resin-matrix cements used in restorative dentistry. Materials (Basel). 2023; 16(4): 1560. doi: 10.3390/ma16041560
  14. Miljkovic M, Dacic S, Mitic A, Petkovic D, Andjelkovic-Apostolovic M. Shear bond strength and failure modes of composite to dentin under different light-curing conditions. Polymers and Polymer Composites. 2022; 30. doi: 10.1177/09673911221143203
  15. Jamil W, Elmarsafy S. Shear bond strength of low shrinkage resin composite to resin modified and nano-filled glass ionomer cements. Al-Azhar Journal of Dentistry. 2018; 5(1): 47-53. doi: 10.21608/adjg.2018.7992
  16. Yoshikawa T, Sadr A, Tagami J. Effect of light curing method and thermal cycling on resin composite adaptation to the cavity wall. Asian Pacific Journal of Dentistry. 2019; 19: 59-64. doi: 10.47416/apjod.19-0268
  17. Jabbour O, Alfares R. Effect of light curing modes of high-powered LEDs on temperature rise under primary teeth dentin (an in vitro study). Journal of Oral & Dental Health. 2022; 6(2): 144-152. doi: 10.33140/JODH.06.02.03
  18. Ozturk O, Sipahi C, Ayyildiz S. Shear bond strengths of six different porcelain laminate veneer materials cemented to enamel with two different MDP-containing resin cements. Journal of Adhesion Science and Technology. 2015; 29(10): 1026-1038. doi; 10.1080/01694243.2015.1016597
  19. Naveed N, Kishorekumar S. Curing techniques of composite resin: continuous or intermittent?. Indian Journal of Forensic Medicine and Toxicology. 2020; 14(4): 1431-1435. doi: 10.37506/ijfmt.v14i4.11737
  20. Selig D, Haenel T, Hausnerová B, Moeginger B, Labrie D, Sullivan B, Price RB. Examining exposure reciprocity in a resin based composite using high irradiance levels and real-time degree of conversion values. Dental Materials: Official Publication of the Academy of Dental Materials. 2015: 31(5): 583–593. doi: 10.1016/j.dental.2015.02.010
  21. Simamora FA, Nugraheni T, Kristanti, Y. Perbedaan kebocoran mikro resin komposit bulkfill viskositas rendah dengan teknik penyinaran ramped, pulsed-delay dan konvensional pada kavitas kelas I. Jurnal Kedokteran Gigi. 7(2): 2016; 62-67. Available at https://jurnal.ugm.ac.id/jkg/article/view/27853
  22. Dionysopoulos D, Tolidis K, Gerasimou P, Koliniotou-koumpia E. Effect of preheating on the film thickness of contemporary composite restorative materials. Journal of Dental Science. 2014; 9(4): 313-319. doi: 10.1016/j.jds.2014.03.006
  23. Fahmi AG, Najim BAE. Effect of preheating on the film thickness of different composite resin used for cementation of indirect restoration comparative in-vitro study. International Journal of Pharmaceutical Research. 2020; 12(2): 3025-3029. doi: 10.31838/ijpr/2020.12.02.408
  24. Goulart M, Borges Veleda B, Damin D, Bovi Ambrosano GM, Coelho de Souza FH, Erhardt MCG. Preheated composite resin used as a luting agent for indirect restorations: effects on bond strength and resin-dentin interfaces. The International Journal of Esthetic Dentistry. 2018; 13(1): 86-97.
  25. Gresnigt MMM, Özcan M, Carvalho M, Lazari P, Cune MS, Razavi P, Magne P. Effect of luting agent on the load to failure and accelerated-fatigue resistance of lithium disilicate laminate veneers. Dental materials: Official Publication of the Academy of Dental Materials. 2017; 33(12): 1392–1401. doi: 10.1016/j.dental.2017.09.010
  26. Abdulsamee N, Elkhadem A, Nagi P. Shrinkage of dental composite resin: contemporary understanding its enigmas and how to solve? a review. ECronicon Dental Science. 2020; 19(5): 3-17.
  27. Pratap B, Gupta RK, Bhardwaj B, Nag M. Resin based restorative dental materials: characteristics and future perspectives. The Japanese Dental Science Review. 2019; 55(1): 126–138. doi: 10.1016/j.jdsr.2019.09.004
  28. Poubel DLDN, Zanon AEG, Almeida JCF, Rezende LVMDL, Garcia FCP. Composite resin preheating techniques for cementation of indirect restorations. International Journal of Biomaterials. 2022; 5935668. doi: 10.1155/2022/5935668
  29. Maletin A, Knežević MJ, Koprivica DĐ, Veljovic T, Puskar T, Milekic B, Ristic I. Dental resin-based luting materials- review. Polymers (Basel). 2023; 15(20): 4156. doi: 10.3390/polym15204156
  30. Yalcin MKA, Keles A, Şişman R, Karagöz Ş. Heat conduction properties of flowable composite resins. European Journal of General Dentistry. 2016; 5(1): 11-14. doi: 10.4103/2278-9626.172733
  31. Marcondes RL, Lima VP, Barbon FJ, Isolan CP, Carvalho MA, Salvador MV, Lima AF, Moraes RR. Viscosity and thermal kinetics of 10 preheated restorative resin composites and effect of ultrasound energy on film thickness. Dent Mater. 2020; 36(10): 1356-1364. doi: 10.1016/j.dental.2020.08.004
  32. Favoreto MW, Carneiro TS, Ñaupari-Villasante R, Cordeiro DC, Cochinski GD, Machado do Nascimento TVP, Matos TP, Bandeca MC, Reis A, Loguercio AD. Clinical performance of preheating thermoviscous composite resin for non-carious cervical lesions restoration: A 24-month randomized clinical trial. J Dent. 2024; 144: 104930. doi: 10.1016/j.jdent.2024.104930



DOI: https://doi.org/10.22146/majkedgiind.104948

Article Metrics

Abstract views : 234 | views : 100

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright (c) 2025 Majalah Kedokteran Gigi Indonesia

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

 

 View My Stats


real time web analytics