Bacterial adhesion of Streptococcus mutans to cobalt chromium recast alloys

Dewi Arsih Sulistiani(1*), Widjijono Widjijono(2), Rini Dharmastiti(3)

(1) Dental Study Program, Universitas Mulawarman, Samarinda, East Kalimantan
(2) Department of Biomaterial, Faculty of Dentistry, Universitas Gadjah Mada, Yogyakarta
(3) Department of Machine Engineering, Faculty of Engineering, Universitas Gadjah Mada, Yogyakarta
(*) Corresponding Author


Cobalt chromium (CoCr) alloys are utilized to make dental prosthesis. Casting CoCr alloys is a common operation in dentistry laboratories due to its low cost. Casting surplus (metal remaining in the sprue and crucible former) is frequently reused by dental laboratories to reduce and recycle metal waste. However, the quality and safety of these recast alloys require further information. Microbial attachment to the surface of metal prostheses may affect its quality and safety. Biofilm formation on metal surface can cause biocorrosion and secondary infection. The effects of different proportions of recast Cobalt Chromium alloy on the bacterial adhesion are not clear. The purpose of this study was to investigate how recasting affects the Streptococcus mutans (S. mutans) adhesion. Twenty disk-shaped specimens (n= 20, allocated for 5 groups) were prepared from CoCr alloys (Remanium GM; Dentaurum) with different proportions (100% new alloy, 25% recast alloy, 50% recast alloy, 75% recast alloy, and 100% recast alloy). After the immersion of the specimens in bacterial suspension for 24 hours, the number of bacteria that adhere to the specimen’s surface was counted using Colony Forming Units. Data were analyzed with one-way ANOVA (α = 0.05). The bacterial adhesion was significantly affected by the recast alloys (p < 0.05). An increased proportion of CoCr recast alloys showed an increase in S. mutans adhesion to the specimen surface.


bacterial adhesion; Streptococcus mutans; recasting; cobalt chromium alloys

Full Text:



1. Tuna SH, Pekmez NO, Kurkcuoglu I. Corrosion resistance assessment of Co-Cr alloy frameworks fabricated by CAD/CAM milling, laser sintering, and casting methods.
J Prosthet Dent. 2015; 114(5): 725-734. doi: 10.1016/j.prosdent.2015.02.031

2. Vaillant-Corroy A-S, Corne P, March PD, Fleutot S, Cleymand F. Influence of recasting
on the quality of dental alloys: a systematic review. J Prosthet Dent. 2015; 114(2): 205-
211. doi: 10.1016/j.prosdent.2015.02.004

3. Oyar P, Can G, Atakol O. Effects of environment on the release of Ni, Cr, Fe, and
Co from new and Recast Ni-Cr Alloy. The Journal of Prosthetic Dentistry. 2014; 112(1):
64-69. doi: 10.1016/j.prosdent.2013.09.022

4. Marsh PD, Martin MV. Oral Microbiology 4th ed. Oxford: Wright; 1999. 11-32.

5. Featherstone JDB, Singh S, Curtis DA. Caries risk assessment and management for the
prosthodontic patient. J Prosthodont. 2011; 20(1): 2-9.
doi: 10.1111/j.1532-849X.2010.00596.x

6. Gharechahi M, Moosavi H, Forghani M. Effect of surface roughness and materials composition
on biofilm formation. Journal of Biomaterials and Nanobiotechnology. 2012; 3(4A): 541-
546. doi: 10.4236/jbnb.2012.324056

7. Teughels W, Van-Assche N, Sliepen I, Quirynen M. Effect of material characteristics and/or
surface topography on biofilm development. Clin Oral Implants Res. 2006; 17(2): 68-81.
doi: 10.1111/j.1600-0501.2006.01353.x

8. Daniel WW, Cross CL. Biostatistic: A Foundation for Analysis in The Health Science. 10th ed. John Wiley and Sons Inc New York; 2013. 207-210.

9. Agrawal A, Hashmi SW, Rao Y, Garg A. Evaluation of surface roughness and tensile strength of base metal alloys used for crown and bridge on recasting (recycling). J Clin Diagn Res. 2015; 9(7): ZC01-ZC04. doi: 10.7860/JCDR/2015/11535.6141

10. Poolphol N, Sakkaew T, Kachin K, Jantaratana P, Vittayakorn W. Physical, Mechanical, and
Magnetic Properties of Cobalt Chromium Alloys Prepared by Conventional Processing. Materials
Today: Proceedings 4; 2017. 6358-6364.

11. Souza JCM, Mota RRC, Sordi MB, Passoni BB, Benfatti CAM, Magini RS. Biofilm
formation on different materials used in oral rehabilitation. Braz Dent J. 2016; 27(2): 141-
147. doi: 10.1590/0103-6440201600625

12. Song F, Koo H, Ren D. Effects of material properties on bacterial adhesion and biofilm formation. J Dent Res. 2015; 94(8): 1027–1034. doi: 10.1177/0022034515587690


Article Metrics

Abstract views : 324 | views : 324


  • There are currently no refbacks.

Copyright (c) 2021 Majalah Kedokteran Gigi Indonesia

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Currently, Majalah Kedokteran Gigi Indonesia indexed by:







 View My Stats

time web analytics