Effect of zinc oxide nanoparticle concentration coated on acrylic resin upon surface roughness and abrasion resistance
I Gede Krisna Merta Yoga(1), Harsini Harsini(2), Siti Sunarintyas(3), Juni Handajani(4), Nuryono Nuryono(5), Dyah Irnawati(6*)
(1) Magister of Dental Science Study Program, Faculty of Dentistry, Universitas Gadjah Mada, Yogyakarta, Indonesia Department of Dental Materials, Study Program of Dentistry, Faculty of Medicine, Universitas Udayana, Bali, Indonesia
(2) Department of Dental Biomaterials, Faculty of Dentistry, Universitas Gadjah Mada, Yogyakarta, Indonesia
(3) Department of Dental Biomaterials, Faculty of Dentistry, Universitas Gadjah Mada, Yogyakarta, Indonesia
(4) Department of Oral Biology, Faculty of Dentistry, Universitas Gadjah Mada, Yogyakarta, Indonesia
(5) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Yogyakarta, Indonesia
(6) Department of Dental Biomaterials, Faculty of Dentistry, Universitas Gadjah Mada, Yogyakarta, Indonesia
(*) Corresponding Author
Abstract
Acrylic resin is the material most often used as a base for dentures; however, acrylic resin has shortcomings in its biological properties as it does not have antimicrobial properties. ZnO is added to acrylic resin because of its antimicrobial properties. The aim of this research is to determine the effect of the concentration of ZnO nanoparticles as a heat polymerization acrylic resin coating on the coating’s resistance to abrasion. A total of 24 acrylic resin samples were made, each measuring 13 x 13 x 2 mm. The acrylic resin was coated with 3-(trimethoxysilyl)propyl methacrylate), then with ZnO nanoparticles with varying concentrations of 2.5%, 5%, and 7.5% in ethanol. ZnO nanoparticle coating was applied using the dip coating method. Subsequently, the samples were subjected to an initial roughness test, abrasion test, and final roughness test. The data obtained were analyzed using one-way ANOVA and LSD(0.05). The results showed that the mean change in roughness (μm) and standard deviation for groups I to IV were 0.11 ± 0.13, 0.08 ± 0.33, 0.1 ± 0.12, and 0.19 ± 0.15, respectively. The results of the one-way ANOVA test showed that there was no significant difference in the roughness after the abrasion test (p > 0.05). Thus, zinc oxide nanoparticles can reduce surface roughness and are resistant to surface abrasion.
Keywords
Full Text:
8. Dyah IrnawatiReferences
1. Riset Kesehatan Dasar (Riskesdas). Badan Penelitian dan Pengembangan Kesehatan
Kementerian RI. 2018. Available at: http://www.depkes.go.id/resources/download/
infoterkini/materi_rakorpop_20 18/Hasil%20Riskesdas%202018.pdf
2. Shen C, Rawls R, Esquivel_Upshaw JF. Phillips’ Science of Dental Materials. 13th ed.
St. Louis Missouri: Elsevier; 2022. 222-3, 592-4, 603-8.
3. Sakaguchi R, Ferracane J, Powers J. Craig’s Restorative Dental Materials. St. Louis
Missouri: Elsevier; 2019. 19-20, 165-6, 514.
4. Cierech M, Osica I, Kolenda A, Wojnarowicz SD, Lojkowski W, Kurzydlowski, K, Ariga K, Mierzwinska-Nastalska E. Mechanical and physicochemical properties of newly ZnO-PMMA nanocomposites for denture bases. Nanomaterials. 2019; 8(305): 1-13.
doi: 10.3390/nano8050305
5. Cierech M, Kolenda A, Grudniak AM, Wojnarowicz J, Wozniak B, Golas M, Swoboda-Kopec E, Lojkowski W, Mierzwinska-Nastalska E. Significance of polymethylmethacrylate (PMMA) modification by zinc oxide nanoparticles for fungal biofilm formation. Int J Pharm. 2016; 510(1): 323-335. doi: 10.1016/j.ijpharm. 06.052
6. Kamonkhantikul K, Arksornnukit M, Takashi H. Antifungal, optical, and mechanical
properties of polymethylmethacrylate material incorporated with silanized zinc oxide
nanoparticles. Int J Nanomedicine. 2017; 12: 2353-2360. doi: 10.2147/IJN.S132116
7. Feng DF, Gong HJ, Guo X. Effects of antibacterial coating on monomer exudation
and the mechanical properties of denture base resins. J Prosth Dent. 2017; 117(!): 171-
177. doi: 10.1016/j.prosdent.2016.05.009
8. Shahmohammadi M, Nagay BE, Barao VAR, Sukotjo C, Jursich G, Takoudis CG.
Atomic layer deposition of TiO2, ZrO2 and TiO2/ZrO2 mixed oxide nanofilms on PMMA
for enhanced biomaterial functionalization. Applied Surface Science. 2022; 578(2022): 151891. doi: 10.1016/j.apsusc.2021.151891.
9. Darvell BW. Material Science for Dentistry. 10th Ed, Cambridge. Woodhead Publishing
Limited; 2018. 299, 534-6.
10. Chowdhury A, Kaurani P, Narendara PU, Meena S, Sharma H, Gupta A. Effect of
addition of titanium oxide and zirconium oxide nanoparticles on the surface roughness of heat
cured denture base resins: an in-vitro study. SVOA Materials Science & Technology. 2021;
3(3): 36-43. doi: 10.1186/s42269-023-01065-2
11. Murat S, Alp G, Alatali C, Uzun M. In vitro evaluation of adhesion of Candida albicans
on CAD/CAM PMMA-based polymers. J Prosthodont. 2019; 28(2): e873-e879.
doi: 10.1111/jopr.12942
12. Alwan S, Alameer S. The effect of the addition of silanized nano tinania fillers on some
physical and mechanical properties of heat cured acrylic denture base materials. J Bagh
College Dentistry. 2015; 27(1): 86-91.
13. Choi J, Uy C, Ramani R, Waddell J. Evaluation of surface roughness, hardness and elasticmodulus of nanoparticle containing light-polymerized denture glaze materials. J Mech Behav Biomed Mater. 2020; 103: 103601. doi: 10.1016/j.jmbbm.2019.103601
14. Zidan S, Silikas N, Alhotan A, Haider J, Yates J. Investigating the mechanical properties of
ZrO2-impregnated PMMA nanocomposite for denture-based applications. Materials. 2019;
12(8): 1-14. doi: 10.3390/ma12081344
15. Zanchi CH, Ogliari FA, Marques SR. et al. Effect of the silane concentration on the selected properties of an experimental microfilled composite resin. Appl Adhes Sci. 2015; 27. doi: 10.1186/s40563-015-0054-0
16. Zhang H, Wang Y, Zhang L, Li S. The effect of zinc oxide concentration on the surface
roughness and antibacterial properties of acrylic resin coating. Journal of Materials Science:
Materials in Medicine. 2018; 29(1): 32.
17. Maharani AS, Aditama P, Indrastuti M, Saleh S. Effect of silica coating in acrylic artificial
teeth on surface roughness, contact angle, and growth of Streptococcus Mutans. Odonto
Dental Journal. 2021; 8(2): 106-112. doi: 10.30659/odj.8.2.106-112
18. Darwish G, Huang S, Knoernschild K, Sukotjo C, Campbell S, Bishal AK, Bara VA, Wu CD,
Taukodis CG, Yang B. Improving polymethyl methacrylate resin using a novel titanium
dioxide coating. Journal of Prosthodontics. 2019; 28(9): 1011-1017. doi: 10.1111/jopr.13032
DOI: https://doi.org/10.22146/majkedgiind.92000
Article Metrics
Abstract views : 532 | views : 415Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Majalah Kedokteran Gigi Indonesia
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.