Manajemen dan Pemantauan Energi Motor BLDC pada Mobil Listrik Berbasis IoT

  • Aditya Ilham Pradana Politeknik Elektronika Negeri Surabaya
  • Eka Prasetyono Politeknik Elektronika Negeri Surabaya
  • Ony Asrarul Qudsi Politeknik Elektronika Negeri Surabaya
  • Era Purwanto Politeknik Elektronika Negeri Surabaya
  • Sutedjo Sutedjo Politeknik Elektronika Negeri Surabaya
  • Syechu Dwitya Nugroho Politeknik Elektronika Negeri Surabaya
  • Lucky Pradigta S.R. Politeknik Elektronika Negeri Surabaya
  • Diah Septi Y. Politeknik Elektronika Negeri Surabaya
Keywords: Pengaturan, Konsumsi Energi, Motor BLDC, IoT, Monitoring

Abstract

This paper presents a system design as a management and monitoring of energy consumption in BLDC motors that are applied to electric vehicle. Energy consumption settings are applied using the Pulse Amplitude Modulation principle by adjusting the input voltage on a BLDC motor. This setting uses a DC-DC converter with Buck Converter topology. This converter is designed with a maximum current capability of 20 A and an output voltage that varies from a range of 24 V - 56 V. To ensure the output voltage is always on the set point, the duty cycle of Buck Converter is set using proportional controls. The regulated energy consumption is monitored with modern technology, namely by using low energy components and with the IoT Devices principle. Based on the results obtained, this method can reduce energy consumption up to 36%, as well as monitoring stable energy consumption at reading sensor.

References

K. Ersan, A. Gorgun, dan Y. Kabalci, "Design and Implementation of a Renewable Energy Monitoring System", Fourth International Conference on Power Engineering, Energy, and Electrical Drives (POWERENG), 2013, hal. 1071-1075.

Sutedjo, O.A Qudsi, A. Ardianto. D.S. Yanarartri, Suhariningsih, dan M. Darwis,”Design and Implementation Buck Converter for 540WP Solar Charger Using Fuzzy Logic Control”, 2018 E3S Web of Conference, 2018, Vol. 3, hal. 1-7.

H.K. Samitha Ranshara, U.K. Madawala, dan T.H. Liu, “Buck Converter Based Model for a Brushless DC Motor Drive without a DC Link Capacitor,” IET Power Electronics, Vol. 8, No.4, hal. 628-635, 2015.

E. Guerro, J. Linares, E. Guzman, H. Sira, G. Guerro, dan A. Martinez, ”DC Motor Speed Control Through Parallel DC/DC Buck Converter,” IEEE Latin America Transactions, Vol. 15, No. 5, hal. 819-826, May 2017.

Z.K.A. Mohammed dan E.S.A. Ahmed, “Internet of Things Applications, Challenges, and Related Future Technologies,” World Scientific News, Vol. 67, No. 2, hal. 126-148, 2017.

Published
2018-11-22
How to Cite
Aditya Ilham Pradana, Eka Prasetyono, Ony Asrarul Qudsi, Era Purwanto, Sutedjo Sutedjo, Syechu Dwitya Nugroho, Lucky Pradigta S.R., & Diah Septi Y. (2018). Manajemen dan Pemantauan Energi Motor BLDC pada Mobil Listrik Berbasis IoT. Jurnal Nasional Teknik Elektro Dan Teknologi Informasi, 7(4), 444-450. Retrieved from https://journal.ugm.ac.id/v3/JNTETI/article/view/2639
Section
Articles