Sistem Penilaian Kondisi Jembatan Menggunakan Respons Dinamik dengan Wireless Sensor Network

  • Seno Adi Putra Institut Teknologi Bandung
  • Gede Agus Andika Sani Institut Teknologi Bandung
  • Adi Trisna Nurwijaya Institut Teknologi Bandung
  • Abikarami Anandadiga Institut Teknologi Bandung
  • Pratama Budi Wijayanto Institut Teknologi Bandung
  • Bambang Riyanto Trilaksono Institut Teknologi Bandung
  • Muhammad Riyansyah Institut Teknologi Bandung
Keywords: Jaringan sensor nirkabel, sistem pengawasan kesehatan struktur, penilaian kondisi jembatan berbasis getaran, nilai jembatan

Abstract

Wireless Sensor Network (WSN) is small embedded devices deployed in large scale network and has capability to sense, compute, and communicate with others. It combines modern sensor, microelectronic, computer, communication, and distributed processing technology. It takes into account in several aspects of live especially in structural health monitoring systemof bridge. Due to environmental circumstance, a bridge should be monitored to make sure that it can perform its service safely. Therefore, it is necessary to develop WSN application to monitor bridge condition and send warning message to control room if the bridge is under abnormal condition. This paper proposes the development of automatic WSN system for measuring the level of bridge structural health based on its dynamic responses. The main contribution of this work is developing WSN system for vibration-based bridge condition assessment in which identifies the bridge’s fundamental frequency and mode shape. Experimental result shows that the fundamental frequency measured by our proposed system is close to the value analyzed using finite element analysis (FEA) and according to Modal Assurance Criteriation (MAC), our proposed measurement system has correlation with FEA.

References

Z. Alam, G. Wang, J. Cao, dan J. Wu, "Deploying Wireless Sensor Network with Fault-Tolerance for Structural Health Monitoring," IEEE Transaction on Computer, Vol. 64, No. 2, hal. 382-395, 2015.

A. B. Noe, A. Abdaoui, T. Elfouly, M. H. Ahmed, dan A. Badawy, "Structural Health Monitoring Using Wireless Sensor Networks: A Comprehensive Survey," IEEE Communicatuon Surveys and Tutorials, Vol. 19, No. 3, hal. 1403-1423, 2017.

M. Lydon, S. E. Taylor, D. Robinson, P. Callender, dan C. Doherty, "Development of a Bridge Weighted-in-Motion Sensor: Performance Comparison Using Fiber Optic and Electric Resistance Strain Sensor System," IEEE Sensors Journal, Vol. 14, No. 12, hal. 4284-4296, 2014.

E. Sazonov, H. Li, D. Curry, dan P. Pillay, "Self-Powered Sensor for Monitoring of Highway Bridges," IEEE Sensor Journal, Vol. 9, No. 11, hal. 1422-1429, 2009.

C. Tschope dan M. Wolff, "Statistical Classifiers for Structural Health Monitoring," IEEE Sensors Journal, Vol. 9, No. 11, hal. 1567-1576, 2009.

Z. Zou, Y. Bao, F. Deng, dan H. Li, "An Approach of Reliable Data Transmission with Random Redundancy for Wireless Sensors in Structural Health Monitoring," IEEE Sensors Journal, Vol. 15, No. 2, hal. 809-818, Feb. 2015.

S. Kim, J. Lee, M.-S. park, dan B.-W. Jo, "Vehicle Signal Analysis Using Artificial Neural Networks for a Bridge Weigh-in-Motion System," Sensors, Vol. 9, No. 10, hal. 7943-7956, Oct. 2009.

P. Guo, J. Cao, dan X. Liu, "Lossless In-Network Processing in WSNs for Domain-Specific Monitoring Applications," IEEE Transactions on Industrial Informatics, Vol. 13, No. 5, hal. 2130-2139, Oct. 2017.

W. Flores Fuentes, M. Rivas Lopez, O. Sergiyenko, J. C. Rodriguez-Quinonez, dan D. Hernandez Balbuena, "Energy Center Detection in Light Scanning Sensors for Structural Health Monitoring Accuracy Enhancement," IEEE Sensors Journal, Vol. 14, No. 7, hal. 2355-2361, Jul. 2014.

A. Araujo, J. García-Palacios, J. Blesa, F. Tirado, dan E. Romero, "Wireless Measurement System for Structural Health Monitoring With High Time-Synchronization Accuracy," IEEE Transactions on Instrumentation and Measurement, Vol. 61, No. 2, hal. 801-810, Mar. 2012.

D. Mascareñas, E. Flynn, C. Farrar, G. Park, dan M. Todd, "A Mobile Host Approach for Wireless Powering and Interrogation of Structural Health Monitoring Sensor Networks," IEEE Sensors Journal, Vol. 9, No. 12, hal. 1719-1726, Dec. 2009.

R. Bajwa, "Wireless Weigh-In_Motion: Using Road Vibratiob to Estimate Truck Weights," PhD Thesis, Electrical Engineering and Computer Sciences University of California, Berkeley, USA, 2013.

C. J. A. Tokognon, B. Gao, G. Y. Tian, dan Y. Yan, "Structural Health Monitoring Framework Based on Internet of Things: A Survey," IEEE Internet of Things Journal, Vol. 4, No. 4, hal. 619-635, Jun. 2017.

A. A. Islam, F. Li, H. Hamid, dan A. Jaroo, "Bridge Condition Assessment and Load Rating Using Dynamic Response," YoungsTown State University, Ohio, Final Report 134695, 2014.

How to Cite
Seno Adi Putra, Gede Agus Andika Sani, Adi Trisna Nurwijaya, Abikarami Anandadiga, Pratama Budi Wijayanto, Bambang Riyanto Trilaksono, & Muhammad Riyansyah. (1). Sistem Penilaian Kondisi Jembatan Menggunakan Respons Dinamik dengan Wireless Sensor Network. Jurnal Nasional Teknik Elektro Dan Teknologi Informasi, 7(3), 338-343. Retrieved from https://journal.ugm.ac.id/v3/JNTETI/article/view/2672
Section
Articles