POTENTIAL AND FEASIBILITY ANALYSIS OF BIOMASS ENERGY FROM PALM OIL MILLS ON NORTH PENAJAM PASER REGENCY REGION OF THE NEW STATE CAPITAL INDONESIA

https://doi.org/10.22146/ajse.v4i1.57567

Faruq Nashrulloh(1*), Muhammad Sulaiman(2), Rachmawan Budiarto(3)

(1) Universitas Gadjah Mada
(2) Universitas Gadjah Mada
(3) Universitas Gadjah Mada
(*) Corresponding Author

Abstract


This paper presents a techno-economic potential and feasibility analysis on the planning of Biomass renewable energy from palm oil mills on the North Penajam Paser Regency. They were analyzed using the last three years of production data history from 7 Palm oil Processing Factories in the region and using questionnaires and interviews. Total processing fresh fruit brunch is about 891.624 tons/year. Total potential electricity generated from palm oil residue (Fiber, Shell, and Stem) is 28.009 kWh. The factories are located in Babulu, Waru, Penajam, and Sepaku.

The assessment of sustainability indicators in this research is considering technology and economic aspects. The technology aspect evaluates the technical planning of installations that are possible to build in the area. For financial aspects of sustainability, evaluates the net present value (NPV), internal rate of return (IRR) and, the payback period of renewable energy installation. This analysis is used to get a comprehensive insight from the potential biomass energy at the research location and conduct a feasibility study based on techno-economic analysis to develop new state capital Indonesia and the supporting regions.


Keywords


biomass;renewable;energy

Full Text:

PDF


References

Q. Wu, T. C. Qiang, G. Zeng, H. Zhang, Y. Huang, and Y. Wang, “Sustainable and renewable energy from biomass wastes in palm oil industry: A case study in Malaysia,” Int. J. Hydrogen Energy, vol. 42, no. 37, pp. 23871–23877, 2017, doi: 10.1016/j.ijhydene.2017.03.147. [2] H. Stichnothe, F. Schuchardt, and S. Rahutomo, “European renewable energy directive: Critical analysis of important default values and methods for calculating greenhouse gas (GHG) emissions of palm oil biodiesel,” Int. J. Life Cycle Assess., vol. 19, no. 6, pp. 1294–1304, 2014, doi: 10.1007/s11367-014-0738-x. [3] M. F. Awalludin, O. Sulaiman, R. Hashim, and W. N. A. W. Nadhari, “An overview of the oil palm industry in Malaysia and its waste utilization through thermochemical conversion, specifically via liquefaction,” Renew. Sustain. Energy Rev., vol. 50, pp. 1469–1484, 2015, doi: 10.1016/j.rser.2015.05.085. [4] N. Permpool, S. Bonnet, and S. H. Gheewala, “Greenhouse gas emissions from land use change due to oil palm expansion in Thailand for biodiesel production,” J. Clean. Prod., vol. 134, no. Part B, pp. 532–538, 2016, doi: 10.1016/j.jclepro.2015.05.048. [5] T. M. I. Mahlia, M. Z. Abdulmuin, T. M. I. Alamsyah, and D. Mukhlishien, “An alternative energy source from palm wastes industry for Malaysia and Indonesia,” Energy Convers. Manag., vol. 42, no. 18, pp. 2109–2118, 2001, doi: 10.1016/S0196-8904(00)00166-7. [6] S. Yusoff, “Renewable energy from palm oil - Innovation on effective utilization of waste,” J. Clean. Prod., vol. 14, no. 1, pp. 87–93, 2006, doi: 10.1016/j.jclepro.2004.07.005. [7] F. R. P. Arrieta, F. N. Teixeira, E. Yáñez, E. Lora, and E. Castillo, “Cogeneration potential in the Columbian palm oil industry: Three case studies,” Biomass and Bioenergy, vol. 31, no. 7, pp. 503–511, 2007, doi: 10.1016/j.biombioe.2007.01.016. [8] M. A. Teixeira, “Heat and power demands in babassu palm oil extraction industry in Brazil,” Energy Convers. Manag., vol. 46, no. 13–14, pp. 2068–2074, 2005, doi: 10.1016/j.enconman.2004.10.014. [9] A. Bazargan, S. L. Rough, and G. McKay, “Compaction of palm kernel shell biochars for application as solid fuel,” Biomass and Bioenergy, vol. 70, pp. 489–497, 2014, doi: 10.1016/j.biombioe.2014.08.015. [10] D. A. Sudaryanti, “Analisis ekonomi pemanfaatan palm oil mill effluent (pome) menjadi biopower,” 2017. [11] P. Anggraeni, “Analisis ekonomi pemanfaatan fiber dan cangkang kelapa sawit menjadi energi listrik,” 2014. [12] M. Mallaki and R. Fatehi, “Design of a biomass power plant for burning date palm waste to cogenerate electricity and distilled water,” Renew. Energy, vol. 63, pp. 286–291, 2014, doi: 10.1016/j.renene.2013.09.036. [13] L. Conrad and I. Prasetyaning, “Promotion of Least Cost Renewables in Indonesia Overview of the Waste-to-Energy Potential for Grid-connected Electricity Generation ( Solid Biomass and Biogas ) in Indonesia,” no. March, 2014. [14] L. Conrads, “Promotion of Least Cost Renewables in Indonesia Grid-connected Biomass & Biogas Power Investment in Indonesia : Barriers and Policy Options Compiled by : Grid-connected Biomass & Biogas Power Investment in Indonesia : Barriers and Policy Options,” no. April, 2014. [15] P. Quaak, “WTP422 Energy from Biomass,” 1999. [16] M. Sulaiman, “Studi Kelayakan Retrofit dan Potensi Keberlanjutan Pembangkit Listrik Tenaga Mikrohidro Tipe Turbin Ulir ICMI ALIF SAFITRI, Muhammad Sulaiman, S.T.,M.T.,D.Eng.;Dr.Rachmawan Budiarto, S.T.,M.T.,” no. 2012, pp. 118–121, 2018. [17] Ministry of Energy and Mineral Resources Republic of Indonesia, “The Minister Decree of Energy and Mineral Resources Republic of Indonesia No. 1772 K/20/MEM/2018: PT PLN (Persero) Cost of Power Generation in 2017,” 2018. [18] M. Eichelbrönner, “Panduan Pembiayaan Bioenergi untuk Pengembang Proyek Promotion of Least Cost Renewables in Indonesia ( LCORE-INDO ),” 2017. [19] T. Kuvarakul, A. Pratidina, D. Anggraeni, and H. Saraswati, “Renewable Energy Guideline on Biomass and Biogas Power Project Development in Indonesia,” no. February, p. 204, 2015. [20] R. Rauch, “Promotion of Least Cost Renewables in Indonesia (LCORE-INDO),” Dtsch. Gesellschaft für Int. Zusammenarbeit, 2012. [21] F. Sgroi, E. Donia, and D. R. Alesi, “Renewable energies, business models and local growth,” Land use policy, vol. 72, no. September 2017, pp. 110–115, 2018, doi: 10.1016/j.landusepol.2017.12.028.



DOI: https://doi.org/10.22146/ajse.v4i1.57567

Article Metrics

Abstract views : 2289 | views : 2805

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 ASEAN Journal of Systems Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.


ASEAN Journal of Systems Engineering (AJSE) 
P-ISSN: 2338-2309 || E-ISSN: 2338-2295
Master in Systems Engineering
Faculty of Engineering
Universitas Gadjah Mada
Jl. Teknika Utara No.3, Barek, Yogyakarta, Indonesia 55281 
Website: https://journal.ugm.ac.id/ajse
Email: jurnalajse@gmail.com | ajse@ugm.ac.id