* Corresponding Author
Hide
Show all
A HYBRID Approach for Determine the Location of Stand Establishment at Batik Hatta Semarang
https://doi.org/10.22146/ijccs.56206 Saifur Rohman Cholil(1*), Leatitia Daphne Adhisti Putri Pertiwi(2)
(1) Program Studi Sistem Informasi, FTIK USM, Semarang
(2) Jurusan Teknologi Informasi, FTIK USM, Semarang
(*) Corresponding Author
Abstract
Semarang has various types of business. One of them is Batik Hatta Boutique, a small and medium business under the guidance of the Bank of Central Java that deals specifically in the world of batik art. This business develops and maintains its existence by participating in various exhibitions in several shopping centers as a media product promotion. To minimize losses, it needs accurate calculation in making decision of determining the location of establishment. It is reviewed by rental cost, location, layout, profit, and security. However, that calculation is still manual so it is inefficient and susceptible to error. Therefore, Decision Support System (DSS) is made to help in getting recommended location of best establishment at the Butik Batik Hatta. The method used in this research is the HYBRID MCDM AHP-TOPSIS Method. Validation process of this research has been done by using comparison of actual data and its result is 0.90 in the Sparman Correlation Coefficient. The conclusion is that the AHP-TOPSIS HYBRID MCDM method can be used in determining the location of establishment stand at the Batik Hatta Boutique.
Keywords
Full Text:
PDFReferences
[1] I. Nurhaida, A. Noviyanto, R. Manurung, and A. M. Arymurthy, “Automatic Indonesian’s Batik Pattern Recognition Using SIFT Approach,” Procedia Comput. Sci., vol. 59, no. Iccsci, pp. 567–576, 2015, doi: 10.1016/j.procs.2015.07.547.
[2] I. S. S. Sharifah, A. T. B. S. T. Nurul, and M. K. N. Khairusshima, “Thermal Modelling and Analysis of Batik Canting Design,” Procedia Eng., vol. 184, pp. 326–333, 2017, doi: 10.1016/j.proeng.2017.04.102.
[3] E. Nur Fu’ad, “Pengaruh Pemilihan Lokasi Terhadap Kesuksesan Usaha Berskala Mikro/Kecil Di Komplek Shopping Centre Jepara,” Media Ekon. dan Manaj., vol. 30, no. 1, pp. 56–67, 2015, doi: 10.24856/mem.v30i1.234.
[4] A. Gnanavelbabu and P. Arunagiri, “Ranking of MUDA using AHP and Fuzzy AHP algorithm,” Mater. Today Proc., vol. 5, no. 5, pp. 13406–13412, 2018, doi: 10.1016/j.matpr.2018.02.334.
[5] T. Hillerman, J. C. F. Souza, A. C. B. Reis, and R. N. Carvalho, “Applying clustering and AHP methods for evaluating suspect healthcare claims,” J. Comput. Sci., vol. 19, pp. 97–111, 2017, doi: 10.1016/j.jocs.2017.02.007.
[6] Y. Wang, Z. Wen, and H. Li, “Symbiotic technology assessment in iron and steel industry based on entropy TOPSIS method,” J. Clean. Prod., vol. 260, p. 120900, 2020, doi: 10.1016/j.jclepro.2020.120900.
[7] V. Senthil Kannan, K. Lenin, and P. Navneethakrishnan, “Machining parameters optimization in laser beam machining for micro elliptical profiles using TOPSIS method,” Mater. Today Proc., vol. 21, no. xxxx, pp. 727–730, 2020, doi: 10.1016/j.matpr.2019.06.747.
[8] G. Büyüközkan and F. Göçer, “An extension of ARAS methodology under Interval Valued Intuitionistic Fuzzy environment for Digital Supply Chain,” Appl. Soft Comput. J., vol. 69, pp. 634–654, 2018, doi: 10.1016/j.asoc.2018.04.040.
[9] Mesran, P. Ramadhani, A. S. Nasution, D. Siregar, Fadlina, and A. P. U. Siahaan, “Implementation of Complex Proportional Assessment Method in the Selection of Mango Seeds,” Int. J. Sci. Res. Sci. Technol., vol. 3, no. 7, pp. 397–402, 2017.
[10] V. D. Iswari, F. Y. Arini, and M. A. Muslim, “Decision Support System for the Selection of Outstanding Students Using the AHP-TOPSIS Combination Method,” Lontar Komput. J. Ilm. Teknol. Inf., vol. 10, no. 1, pp. 40–48, 2019, doi: 10.24843/lkjiti.2019.v10.i01.p05.
[11] I. K. A. Pirnanda, I. M. A. Pradnyana, and I. M. Agus, “Decision Support System for Household Labor Services Selection ‘ Best Helper ’ Using AHP and TOPSIS Methods,” Sci. J. Informatics, vol. 6, no. 1, pp. 106–115, 2019.
[12] D. H. Muhsen, H. T. Haider, Y. M. Al-Nidawi, and T. Khatib, “Domestic load management based on integration of MODE and AHP-TOPSIS decision making methods,” Sustain. Cities Soc., vol. 50, no. February, p. 101651, 2019, doi: 10.1016/j.scs.2019.101651.
[13] R. Nadda, R. Kumar, T. Singh, R. Chauhan, A. Patnaik, and B. Gangil, “Experimental investigation and optimization of cobalt bonded tungsten carbide composite by hybrid AHP-TOPSIS approach,” Alexandria Eng. J., vol. 57, no. 4, pp. 3419–3428, 2018, doi: 10.1016/j.aej.2018.07.013.
[14] S. R. Cholil and H. Indriyawati, “Electre Method for Determining Car Stock at PT . New Ratna Motor with a Customer Satisfaction Approach,” J. Transform., vol. 16, no. 2, pp. 160–168, 2019.
[15] M. W. L. Moreira, J. J. P. C. Rodrigues, V. Korotaev, J. Al-Muhtadi, and N. Kumar, “A Comprehensive Review on Smart Decision Support Systems for Health Care,” IEEE Syst. J., vol. 13, no. 3, pp. 1–10, 2019, doi: 10.1109/JSYST.2018.2890121.
[16] D. N. Ilham and S. Mulyana, “Sistem Pendukung Keputusan Kelompok Pemilihan Tempat PKL mahasiswa dengan Menggunakan Metode AHP dan Borda,” IJCCS (Indonesian J. Comput. Cybern. Syst., vol. 11, no. 1, p. 55, 2017, doi: 10.22146/ijccs.16595.
[17] F. Moussaoui, M. Cherrared, M. A. Kacimi, and R. Belarbi, “A genetic algorithm to optimize consistency ratio in AHP method for energy performance assessment of residential buildings—Application of top-down and bottom-up approaches in Algerian case study,” Sustain. Cities Soc., vol. 42, pp. 622–636, 2017, doi: 10.1016/j.scs.2017.08.008.
[18] W. Chang, “Application Research of AHP in Competitiveness Evaluation of Regional Sports Industry,” Proc. - 2016 Int. Conf. Smart City Syst. Eng. ICSCSE 2016, pp. 490–493, 2016, doi: 10.1109/ICSCSE.2016.0134.
[19] D. R. Sari, A. P. Windarto, D. Hartama, and S. Solikhun, “Sistem Pendukung Keputusan untuk Rekomendasi Kelulusan Sidang Skripsi Menggunakan Metode AHP-TOPSIS,” J. Teknol. dan Sist. Komput., vol. 6, no. 1, p. 1, 2018, doi: 10.14710/jtsiskom.6.1.2018.1-6.
DOI: https://doi.org/10.22146/ijccs.56206
Article Metrics
Abstract views : 3277
| 
views : 2489
Refbacks
- There are currently no refbacks.
Copyright (c) 2020 IJCCS (Indonesian Journal of Computing and Cybernetics Systems)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
View My Stats1