Kualitas Papan Partikel dari Pelepah Nipah dengan Perekat Asam Sitrat dan Sukrosa
Mahdi Santoso(1*), Ragil Widyorini(2), Tibertus Agus Prayitno(3), Joko Sulistyo(4)
(1) 1Jurusan Kehutanan, Fakultas Pertanian, Universitas Palangka Raya Jl. Yos Sudarso, Palangka Raya 73112
(2) Departemen Teknologi Hasil Hutan, Fakultas Kehutanan, Universitas Gadjah Mada, Jl. Agro No. 1, Bulaksumur, Sleman, 55281
(3) Departemen Teknologi Hasil Hutan, Fakultas Kehutanan, Universitas Gadjah Mada, Jl. Agro No. 1, Bulaksumur, Sleman, 55281
(4) Departemen Teknologi Hasil Hutan, Fakultas Kehutanan, Universitas Gadjah Mada, Jl. Agro No. 1, Bulaksumur, Sleman, 55281
(*) Corresponding Author
Abstract
Penggunaan perekat alami dan bahan baku non kayu dalam pembuatan papan partikel masih sangat terbatas. Sukrosa dan asam sitrat adalah dua bahan alami yang potensial sebagai perekat alami pengganti perekat sintetik berbasis formaldehida. Nipah (Nypa fruticans Wurmb.) merupakan bahan non kayu yang potensial dijadikan alternatif bahan baku papan partikel. Penelitian ini bertujuan untuk mengetahui kualitas papan partikel pelepah nipah yang direkat dengan sukrosa/asam sitrat (100/0, 87,5/12,5 dan 75/25). Papan partikel yang dibuat berukuran 25 cm × 25 cm × 1 cm, target kerapatan 0,8 g/cm3. Variabel perekatan antara lain jumlah perekat 20%, waktu kempa 10 menit, suhu kempa 180°C dan tekanan spesifik 3,6 MPa. Sifat fisika dan mekanika papan partikel diuji berdasarkan standar JIS A 5908:2003, kekasaran permukaan diukur menggunakan metode yang dilakukan oleh Hiziroglu (1996). Hasil penelitian menunjukkan bahwa penambahan asam sitrat terhadap sukrosa berpengaruh positif terhadap sebagian besar sifat papan partikel pelepah nipah. Papan partikel pelepah nipah dengan perekat sukrosa/asam sitrat 87,5/12,5 mampu memberikan hasil terbaik dengan memenuhi standar JIS A 5908:2003. Karakteristik papan partikel tersebut adalah kerapatan 0,89 g/cm3, kadar air 10,21%, pengembangan tebal 2,45%, penyerapan air 23,55%, kekasaran permukaan 5,13 μm, keteguhan rekat internal 0,39 MPa, keteguhan patah 9,80 MPa dan keteguhan elastisitas 3,19 GPa.
Kata kunci: papan partikel, pelepah nipah, perekat alami, sukrosa, asam sitrat
Quality of the Nipa Frond Particleboard Bonded with Citric acid and Sucrose
Abstract
Utilization of natural binder for non-wood composite is still limited. Sucrose and citric acid are potential natural binding agents for composite products. Nipa (Nypa fruticans Wurmb.) was non-wood materials which are potentially to be used as an alternative raw material for particleboards. This study aimed to determine the quality of the nipa frond particleboard bonded with sucrose/citric acid (100/0, 87.5/12.5 and 75/25). Particleboards were manufactured in 25 cm × 25 cm × 1 cm dimension, the target of density 0.8 g/cm3. The variables included resin content of 20%, press time of 10 m, pressing temperature of 180°C and specific pressure of 3.6 MPa. The physics and mechanics properties of particleboard were tested in accordance to standard JIS A 5908:2003 and surface roughness was measured by following the method performed by Hiziroglu (1996). The results showed that the addition of citric acid to sucrose give a positive effect on most of the properties of the nipa frond particleboards. The particleboard bonded with sucrose/citric acid 87.5/12.5 was able to provide the best results to meet the standards of JIS A 5908: 2003. Characteristics of the particleboard was a density of 0.89 g/cm, moisture content of 10.21%, thickness swelling of 2.45%, water absorption of 23.55%, surface roughness of 5.13 ìm, internal bonding of 0.39 MPa, modulus of rupture of 9.80 MPa and modulus of elasticity of 3.19 GPa.
Keywords
Full Text:
PDFReferences
- Bock K & Lemieux RU. 1982. The conformational properties of sucrosein aqueous solution: Intramolecular hydrogen-bonding. Carbohydrate Research 100(1),63-74.
- Harifi T & Montazer M. 2012. Past, present and future prospects of cotton cross-linking: New insight into nanoparticles. Carbohydrate Polymers 88, 1125-1140.
- Hashim R, Saari N, Sulaiman O, Sugimoto T, Hiziroglu S, Sato M, & Tanaka R. 2010. Effect of particle geometri on the properties of binderless particleboard manufactured from oil palm trunk. Materials and Design 31, 4251-4257.
- Hiziroglu S, Suzuki S. 2007. Evaluation of surface roughness of commercially manufactured particleboard and medium density fiberboard in Japan. Journal of Material Processing Technology 184, 436-440.
- Hiziroglu S. 1996. Surface roughness analysis of wood composites: a stylus method. Forest Product Journal 46, 67-72.
- Indrawan DA, Roliadi H, Tampubolon RM & Pari, G. 2013. Penyempurnaan sifat papan serat kerapatan sedang dari pelepah nipah dan campurannya dengan sabut kelapa. Jurnal Penelitian Hasil Hutan 31(2), 120-140.
- Japanese Industrial Standard. 2003. JIS A 5908-2003 particleboards.Japanese Standard Association, Tokyo.
- Kruse K & Frühwald A. 2001. Properties of nipa and coconut fibers and production and properties of particle and mdf-boards made from nipa and coconut. Bundesforschungsanstalt für Forst- und Holzwirtschaft Nr 04, Hamburg.
- Lamaming J, Sulaiman O, Sugimoto T, Hashim R, Said N, & Sato M. 2013. Influence of chemical components of oil palm on properties of binderless particleboard. BioResources 8(3), 3358-3371.
- Lempang M. 2013. Produksi nata fruticans dari nira nipah (Nypa fruticans Wurmb.). Jurnal Penelitian Hasil Hutan 31(2), 110-119.
- Roliadi H, Indrawan DA, Pari G & Tampubolon RM. 2012. Potensi teknis pemanfaatan pelepah nipah dan campurannya dengan sabut kelapa untuk pembuatan papan serat berkerapatan sedang. Jurnal Penelitian Hasil Hutan 30(3), 183-198.
- Subiandono E, Heriyanto NM, & Karlina E. 2011. Kajian potensi (Nypa fruticans Thumb.) sebagai pangan dan energi dari rutan mangrove. Buletin Plasma Nutfah 17(1), 54-60.
- Tamunaidu P & Saka S. 2011. Chemical characterization of various parts of nipa palm (Nypa fruticans). Industrial Crops and Products 34, 1423-1428.
- Umemura K, Ueda T, Munawar SS, & Kawai S. 2012. Application of citric acid as natural adhessive for wood. Journal of Applied Polymer Science 123, 1991-1996.
- Umemura K, Sugihara O, & Kawai S. 2013. Investigation of a new natural adhesive composed of citric acid and sucrose for particleboard. Journal of Wood Science 59, 203-208.
- Umemura K, Sugihara O, & Kawai S. 2014. Investigation of a new natural adhesived composed of citric acid and sucrose for particleboard II: Effect of board density and pressing temperature. Journal of Wood Science 61,40-44.
- Widyorini R, Prayitno TA, Yudha AP, Setiawan BA & Wicaksono BH. 2012. Pengaruh konsentrasi asam sitrat dan suhu pengempaan terhadap kualitas papan partikel dari pelepah nipah. Jurnal Ilmu Kehutanan 6(1), 61-70.
- Widyorini R, Umemura K, Isnan R, Putra DR, Awaludin A, & Prayitno TA. 2016a. Manufacture and properties of citric acid-bonded particleboard made from bamboo materials. European Journal of Wood and Wood Products 74, 57-65. Widyorini R, Pradana PA, Muhammad ZAR, & Prayitno TA. 2016b. Bonding ability of a new adhesive composed of citric acid-sucrose for particleboard. BioResources 11(2), 4526-4535.
DOI: https://doi.org/10.22146/jik.16514
Article Metrics
Abstract views : 8641 | views : 6195Refbacks
- There are currently no refbacks.
Copyright (c) 2016 Jurnal Ilmu Kehutanan
License URL: https://creativecommons.org/licenses/by-nc-sa/4.0/
© Editorial Board Jurnal Ilmu Kehutanan
Faculty of Forestry, Universitas Gadjah Mada
Building D 2nd floor
Jl. Agro No 1, Bulaksumur, Sleman 55281
Phone. +62-274-512102, +62-274-550541, +62-274-6491420
Fax. +62-274-550541 E-mail : jik@ugm.ac.id
former website : jurnal.ugm.ac.id/jikfkt/
new website : jurnal.ugm.ac.id/v3/jik/
Indexed by:
Jurnal Ilmu Kehutanan is under the license of Creative Commons Attribution-ShareAlike 4.0 International