Deflection test on different orthodontic wire materials sized 0.016 x 0.022 inches

Harris Gadih Pratomo(1), Endah Mardiati(2), Eky Soeria Soemantri(3), Ida Ayu Evangelina(4*)

(1) Orthodontics Specialist Program, Faculty of Dentistry, Universitas Padjadjaran, Bandung
(2) Department of Orthodontics, Faculty of Dentistry, Universitas Padjadjaran, Bandung
(3) Department of Orthodontics, Faculty of Dentistry, Universitas Padjadjaran, Bandung
(4) Department of Orthodontics, Faculty of Dentistry, Universitas Padjadjaran, Bandung
(*) Corresponding Author


The development of technology in orthodontic field produces some orthodontic wires that have different deflection abilities. Loading force is the force needed to place an orthodontic wire in bracket slot (activation). Unloading force is the force produced by an orthodontic wire to move tooth (deactivation). Deflection test with three-point bending technique is a technique that is often used to determine the magnitude of the activation and deactivation force of orthodontic wire. Stainless steel (SS), nickel titanium (NiTi), copper nickel titanium (CuNiTi), and beta titanium (TMA), are the types of frequently used wires. This study aimed to compare loading and unloading force on the deflection test of SS, NiTi, CuNiTi, and TMA orthodontic wires sized 0.016 x 0.022 inch on the load-deflection graph. This is a laboratory
experimental research on a total of 16 pieces of SS, NiTi, CuNiTi, and TMA orthodontic wires sized 0.016 x 0.022 inches. The group was divided based on the type of material. The deflection test was performed using a universal testing machine with a press speed of 5 mm/minute. Loading and unloading forces were recorded on deflections of 0.5; 1; and
1.5 mm. Statistical tests of differences among groups were carried out by ANOVA analysis (p-value ≤ 0.05) and post-hoc analysis with T-test. There were significant differences in the loading and unloading forces recorded on deflections of 0.5; 1; and 1.5 mm; except for deflections of 0.5 mm of the SS and nickel-titanium wires. The wire deflection force from
the lowest to the highest was CuNiTi wire, nickel-titanium wire, TMA wire, and stainless-steel wire.


deflection test; loading force; orthodontic wire; unloading force; universal testing machine

Full Text:



1. Alam MK. A To Z Orthodontics - Removable Appliance. Vol 1. Kelantan: PPSP Publication;
2012. 3-11.

2. Proffit W, Fields H. Contemporary orthodontics. 5th ed. St. Louis: Mosby-Elsevier; 2012.

3. O’Brien WJ. Dental material and their selection. 4th ed. Chicago: Quintessence Publishing;
2008. 276-289.

4. Kotha RS, Alla RK, Shammas M, Ravi RK. An Overview of orthodontic wires. trends biomater artif organs. 2014; 28(1): 32-36.

5. Khatri JM, Mehta VP. Evaluation of force deflection properties of various types of initial
orthodontic archwires. J Indian Orthod Soc. 2014; 48(5): 309-312.

6. Reddy RK, Katari PK, Bypureddy TT, Anumolu VNSH, Kartheek Y, Sairam NRV. Forces in
initial archwires during leveling and aligning: An in-vitro study. J Int Soc Prev Community
Dent. 2016; 6(5): 410-416. doi: 10.4103/2231-0762.192940

7. Mathew T. The Loading and unloading properties of various arch wires as a function
of cross-sectional dimension and inter bracket span width system. Malay Dent J. 2011; 32(1): 29-41.

8. Askeland DR, Fulay PP. Essentials of Materials Science and Engineering. 2nd ed. Toronto: CLEngineering; 2008. 171-173.

9. Brantley WA, Eliades T. Orthodontic materialsscientific and clinical aspects. Stuttgart:
Thieme; 2001. 78-100.

10. Mistakidis I, Gkantidis N, Topouzelis N. Review of properties and clinical application of
orthodontic wires. Hellenic Orthod Rev. 2011; 14(1): 45-66.

11. Juvvadi SR, Kailasam V, Padmanabhan S, Chitaranjan AB. Physical, mechanical, and
flexural properties of 3 orthodontic wires: An in-vitro study. Am J Orthod Dentofacial
Orthop. 2010; 138(5): 623-630. doi: 10.1016/j.ajodo.2009.01.032

12. Quintão CC, Cal-Neto JP, Menezes LM, Elias CN. Force-Deflection properties of initial orthodontic archwires. World J Orthod. 2009; 10(1): 29-32.

13. Elayyan F, Silikas N, Bearn D. Ex vivo surface and mechanical properties of coated
orthodontic archwires. Eur J Orthod. 2008; 30(6): 661-667. doi: 10.1093/ejo/cjn057

14. Sifakakis I, Pandis N, Makou M, Eliades T, Bourauei C. A comparative assessment of the
forces and moments generated with various maxillary incisor intrusion biomechanics. Eur
J Orthod. 2010; 32(2): 159-164. doi: 10.1093/ejo/cjp089
15. Nanda R. Biomechanics and Esthetic Strategies in Clinical Orthodontics. 1st ed.
Philadelphia: Saunders-Elsevier; 2005. 295-309.


Article Metrics

Abstract views : 2583 | views : 2105


  • There are currently no refbacks.

Copyright (c) 2018 Majalah Kedokteran Gigi Indonesia

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Currently, Majalah Kedokteran Gigi Indonesia indexed by:







 View My Stats

time web analytics