Effects of Cassava Chips Fermentation Conditions on The Produced Flour Properties

https://doi.org/10.22146/ajche.49674

Angina Meitha(1), Yazid Bindar(2), M.T.A.P. Kresnowati(3*)

(1) Department of Chemical Engineering, Faculty of Industrial Engineering, Institut Teknologi Bandung, Ganesha 10, Bandung, 40132, Indonesia
(2) Department of Chemical Engineering, Faculty of Industrial Engineering, Institut Teknologi Bandung, Ganesha 10, Bandung, 40132, Indonesia
(3) Department of Chemical Engineering, Faculty of Industrial Engineering, Institut Teknologi Bandung, Ganesha 10, Bandung, 40132, Indonesia
(*) Corresponding Author

Abstract


A fermentation process to produce soft-texture and low cyanogenic content cassava flour had been studied, in particular the effects of temperature, circulation of the fermentation media, and chips size, on fermented cassava flour (fercaf) properties. Fermentation was shown to affect properties of cassava flour: reducing the cyanogenic content, swelling power, as well as solubility, whereas on the other hand increasing the amylose content and correspondingly the measured DE. Further, the properties of the produced flour were affected by the implemented fermentation operation conditions. Fermentation temperature was found to significantly affect amylose content. Media circulation was found to significantly affect the measured Dextrose Equivalent. On the other hand, the size of cassava chips significantly affected the cyanogenic content and solubility of the flour

Keywords


fercaf, fermentation, circulated reactor, flour properties

Full Text:

PDF


References

  1. Bainbridge, Z., Harding, S., French, L., Kapinga, R. and Westby, A. (1998). A study of the role of tissue disruption in the removal of cyanogens during cassava root processing. Food Chem., 62, 291.
  2. Brauman, A., Kéléké, S., Malonga, M., Miambi, E. and Ampe, F. (1996). Microbiological and biochemical characterization of cassava retting, a traditional lactic acid fermentation for foo-foo (cassava flour) production. Appl. Env. Microbiol., 62, 2854.
  3. Chukwuemeka, O.C. (2007). Effect of process modification on the physio- chemical and sensory quality of fufu- flour dough. AJB, 6, 1949.
  4. Daramola, B. and Osanyinlusi, S.A. (2006). Investigation on modification of cassava starch using active components of ginger roots (Zingiberofficinale Roscoe). AJB, 5, 917.
  5. Kainuma K., Odat T. and Cuzuki S. (1967). Study of starch phosphates monoester. J. Tech. Soc. Starch, 14, 24.
  6. Kresnowati, M.T.A.P., Bindar, Y., Aliwarga, L., Lestari, D., Prasetya, N. and Tanujaya, A. R. (2014). Effects of retting media circulation and temperature on the fermentation process in soft-texture and low cyanogenic content cassava flour production. AJChE., 14, 67.
  7. Larson, B.L., Gilles, K. A. and Jenness, R. (1953). Amperometric method for determining sorption of iodine by starch, Anal. Chem., 25, 802.
  8. Moresco, H., Sanson, P. and Seonae, G. (2008). Simple potentiometric determination of reducing sugar, J. Chem. Educ., 85, 109.
  9. Putri, W.D.R, Haryadi, Marseno, D.W. and Cahyanto, M.N. (2012). Role of lactic acid bacteria on structural and physicochemical properties of sour cassava starch, APCBEE Procedia, 2, 104.
  10. Subagio, A. (2008). Modified Cassava Flour (MOCAL): The future of food security based on local potential, Majalah Pangan, 50, 92.
  11. Tanya, A.K.N, Mbofung, C.M.F and Keshinro, O.O. (1997). Soluble and insoluble fibre contents of some Cameroonian foodstuffs, Plant Food for Hum. Nutr., 51, 199.
  12. Wahjuningsih, S.R. (2011). HCN decrease during the review process in making flour natural fermentation Mocal, Jurnal Teknologi Pangan dan Hasil Pertanian, 8(2), 84.
  13. Winarmo, F.G. (2002). Food chemistry. Jakarta: Gramedia.
  14. Zulaidah, A. (2011). Biological modification of cassava using BIMO-CF starter to make wheat-subtitute- modified flour. Semarang, Indonesia: Diponegoro University: MSc Thesis.



DOI: https://doi.org/10.22146/ajche.49674

Article Metrics

Abstract views : 2526 | views : 2637

Refbacks

  • There are currently no refbacks.


ASEAN Journal of Chemical Engineering  (print ISSN 1655-4418; online ISSN 2655-5409) is published by Chemical Engineering Department, Faculty of Engineering, Universitas Gadjah Mada.