PROPOSED CONCEPTUAL FRAMEWORK OF INVENTORY MANAGEMENT USING THE JUST-IN-TIME (JIT) PHILOSOPHY
Eduardus Tandelilin(1*)
(1) University of Gadjah Mada
(*) Corresponding Author
Abstract
The effectiveness of the proposed JIT inventory management model, while conceptually developed based on previous case studies, depends largely to both internal and external support mechanisms of the organization. While the JIT philosophy has manifested remarkable contributions to productivity and efficiency in the developed countries, much has yet to be gained from it in the developing countries. Some problems can confound the adoption and implementation of JIT in the third world.
Sector, as in the case of Tanzania (Msimangin, 1993): financial constraints, inadequate supply of inputs required for the production mills to operate near capacity, international delivery delays, an inadequate transportation infrastructure, and unreliable product demand forecasts. These problems are also present in the Philippines. Zamora (1989) identified several additional problems encountered in the implementation of JIT components in the Philippine setting: resistance to change, socio-cultural barriers, and lack of training, The success of any model or framework using the JIT philosophy must address these prob- j lems firmly. As in other cases, the successfti implementation of the proposed inventory management framework using the JIT philosophy could be achieved if existing local conditions aw considered to suit the requirements of the model] Flexibility of model adoption is therefore necessary.
Further, it is recommended that the proposed model be practically applied in applicable situations and empirical informal be obtained to improve the framework. In this sense, the proposed model will be tested as to its practical usefulness apart from being conceptual.
Keywords
Full Text:
PDFReferences
Ansari. A and Heckel, Jim. (1987). JIT purchasing: impact of Freight and inventory cost international Journal of Purchasing and Material Management, Vol. 23, No. 2 : 24-28. Assad, Arjang A., Nasil, Edward A. & Lilien, Gary L. (1992). Production and inventory management. In A. Assad, E. Nasil & G. Lilien (Eds.), Excellence in Management Science Practice: A Readings Book, 30-65. New Jersey: Wiley. Bahadur, B.N. (1995). Will just-in-time work for you? And will you work for it? Secured Lender, Vol. 51:118-120. Chase, Richard B. and Aquilano, Nichlas J. (1995). Production and Operations Management: Manufacturing and Services, Seventh Edition, Irwin. Chu, Chao-Hsien, and Shih, Wei-Ling. (1992). Simulation studies in JIT production, Internal Journal of Production Research, Vol. 30, No. 11: 2573-2586. Courtis, John. K. (1995). JIT's impact on a firmis financial statement, International Journal of Purchasing and Material Management, Vol. 31, No. 1: 46-50. Dion, Paul. A; Banting, Peter. M; Picard, Sharon; and Blenkhorn, David. L (1992). JIT implementation: a growth opportunity for purchasing, International Journal of Purchasing and Material Management, Vol. 28, 4: 32-38. Ellram, Lisa. M. (1991). A managerial guideline for the development and implementation of purchasing partnerships. International Journal of Purchasing and Material Management, Vol. 27, No. 3: 28. Ferrin, Bruce. (1994). Planning just-in-time supply operations: a multiple-case analysis, Journal of Business Logistics. Vol. 15, No. 1: 55-69. Finch, Byron J. and Luebbe, Richard L. (1995). Operation Management: Competing in a Changing Environment, International Edition, The Dryden Press. Fry, Timothy D. & Smith, Allen. (1987). A procedure for implementing input-output: a case study. Production and Inventory Management Journal, Fourth Quarter: 50-52. Gagne, Margaret. L. and Discenza, Richard. (1992) Accurate product costing in a JIT environment, International Journal of Purchasing and Material Management, Vol. 28, No. 4: 28-31. Gavin, Thomas M. (1989). Increasing production efficiency through restricted sourcing and sequence-dependent setup costs. Production and Inventory Management Journal, First Quarter: 58 62. Germain, Richard; Droge, Cornelia; and Daugherty, Patricia J. (1994). Journal of Marketing Research, Vol. 31: 471-483 Golany, Boaz, Yadin, Micha & Learner, Oded. (1991). A goal programming inventory control model applied at a large chemical plant. Production and Inventory Management Journal, First Quarter: 16-24. Graff, Richard T. (1987). The limitation of cycle counting. Production and Inventory Management Journal, Fourth Quarter: 39 43. Gupta, Yash P. (1990). A feasibility study of JIT purchasing implementation in a manufacturing facility. International Journal of Operations & Production Management, Vol. 10, No. 1: 31-41. Harber, D.; Samson, DA; and Sohal, A.S.; and Wirth, A. (1990). Juts-in-time: the issue of implementation. International Journal of Operations & Production Management,Vo. 10, No. 1: 21-30. Harrison, Alan and Voss, Chrisropher. (1990). Issues in setting up JIT supply, International Journal of Operational & Production Management, Vol. 10, No. 2: 84-93. Hum, Sin-Hoon. (1991). Industrial progress and the strategic significant of JIT and TQC for developing countries, International Journal of Operations & Production Management, Vol. 11, No. 5: 39-46. Im, Jin H; Harman, Sandra J; and Bondi, Philip J. (1994). How do JIT systems effect resource management?, Production and Inventory Management Journal, Vol. 35:14 Janson, Robert L. (1987). Handbook of Inventory Management, Prentice-Hall, Inc., Englewood Cliffs, N.J. John, Carson, H.St. and Heriot, Kirk. C. (1993). Small suppliers and JIT purchasing, International Journal of Purchasing and Material Management, Vol. 29, No. 1:11-16. Joshi, Kailash and Campbell, James. F. (1991). Managing inventories in a JIT environment, International Journal of Purchasing and Material Management, Vol. 27, No. 2: 32-36. Kenet, John J. (1986). Inventory planning in Black & Decker. In F. Robert Jacobs & Vincent A. Mabert. Production Planning, Scheduling and Inventory Control: Concepts, Techniques, and Systems: 237 249. Third Ed., Industrial Engineering and Management Press. Landeros, Robert; Reck, Robert, and Plank. Richard. E. (1995). Maintaining buyersupplier partnership, International Journal of Purchasing and Material Management, Vol. 31, No. 3. Luggen, William W. (1991). Flexible Manufacturing Cells and System, Prentice-Hall, Inc., New Jersey. McClain, John O: Thomas, Joseph L; and Mazzola, Joseph B. (1992). Operation Management Production of Goods and Services. Third Edition, Prentice Hall. Minifie, J. Roberta & Davis, Robert A. (1986! Survey of MRP nervousness. Production I and Inventory Management Journal, Third Quarter: 111-119. Msimaangira, K.A.B. (1993). Using "Just-ir time" in developing countries: a easel study in Tanzania. International Jourrxm of Purchasing and Material Management Vol. 29, No. 1: 44-47. Nieuwenhuis, Paul. (1994). Environmental implication of just-in time supply -J Japan Lessons for Europe?, Logisticm Focus, Vol. 2: 24. Noori, Hamid and Radford Russell. (1998 Production and Operations Management: Total Quality and Respon siveness, International Edition, McGrai Hill, Inc. Norris, Daniel M; Swanso, Robert D. and Yung-Ling. (1994). Just in-time duction systems: a survey of manac Production and Inventory Managema Journal, Vol. 35: 6366. Pan, Andrew C. & Liao, Ching-Jong. (1989). An inventory model under justintime purchasing agreements. Production and Inventory Management Journal, First Quarter: 49-52. Ritchie, Eric & Tsado, Aaron K. (1986). A review of lotsizing techniques for deterministic timevarying demand. Production and Inventory Management Journal, Third Quarter: 64-78. Safayeni, Frank; Purdy, Lyn; Engelen, Ralp. van; and Pal. Siva. (1991). Difficulties of just-in-time implementation: a clarification scheme, International Journal of Operations & Production Management, Vol. 11, No. 7: 27-36. Schniederjans, Marc J. (1993). Just-in-time Management, Allyn and Bacon, A Division of Simon & Schuster, Inc. Singh, N; Shek, Keok-Hung; and Meoche, Dave. (1990). The development of a kanban system: a case study, International Journal of Operations & Production Management, Vol. 10, No. 7: 28-36. Stevenson, William J. (1996). Production/ Operations Management, Fifth Edition, Richard D. Irwin. Striekwold, P.E.T. (1990). A quantitative comparison of production and inventory control concepts. International Journal of Production Research. Vol. 28, No. 11: 1921-1937. Zamora, Elvira. A. (1989). The Just-in-time System in Selected Philippine Manufacturing Companies, Unpublished CBA Dissertation, College of Business Administration, University of the Philippine, Diliman.
Article Metrics
Abstract views : 6472
| 
views : 1623
Refbacks
- There are currently no refbacks.
Copyright (c) 1996 Journal of Indonesian Economy and Business
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
| Journal of Indonesian Economy and Business |
| The Journal of Indonesian Economy and Business (print ISSN 2085-8272; online ISSN 2338-5847) is published by the Faculty of Economics and Business Universitas Gadjah Mada, Indonesia. The content of this website is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License |
| © 2019 Journal of Indonesian Economy and Business | Visitor Statistics |