Design of a Monitoring and Nutrient Management System Based on Internet of Things (IoT) for Hydroponic Method Using MIT App Inventor

https://doi.org/10.22146/juliet.v6i1.99431

Shandy Gilang Priawardana(1*), Atikah Surriani(2)

(1) Departemen Teknik Elektro dan Informatika, Universitas Gadjah Mada
(2) Departemen Teknik Elektro dan Informatika, Universitas Gadjah Mada
(*) Corresponding Author

Abstract


Hydroponics is an agricultural method that uses a growing medium with low nutrient content. In hydroponics, nutrients are required. These nutrients are very important for plant growth in hydroponics. If hydroponic plants lack nutrients, they will die. Water needs in hydroponic reservoirs also need to be considered, so that the water in hydroponics remains stable. Other factors such as water temperature are also important in the hydroponic method. High temperatures can inhibit plant growth and can cause plants to grow faster (bolting). Therefore, the design of temperature monitoring, as well as nutrient management and water level in hydroponic reservoirs based on the Internet of Things (IoT) is made. This tool can manage hydroponic systems efficiently and is easy to operate because it is IoT-based, so that farmers can monitor and manage only via Smartphone on the MIT App Inventor application. This research method has several important stages, namely analysis of the needs of tools and materials, tool design, functional testing of tools, and data analysis. The system will measure the value of nutrients, water temperature, and water level. From this data, it will be processed and arranged for monitoring and management in hydroponic. The results of this final project are the average TDS sensor error of 3.9232%, the average HC-SR04 ultrasonic sensor error of 3.53%, the average DS18B20 temperature sensor error of 2.7513%. This tool can perform monitoring and nutrient management in IoT-integrated hydroponics well, because the resulting error is below 5% and the system runs well.


Full Text:

PDF


References

E. D. Purbajanti, W. Slamet, and F. Kusmiyati, Hydroponic: Bertanam Tanpa Tanah. Semarang: EF Press Digimedia, 2017.

M. Marisa, C. Carudin, and R. Ramdani, “Otomatisasi Sistem Pengendalian dan Pemantauan Kadar Nutrisi Air menggunakan Teknologi NodeMCU ESP8266 pada Tanaman Hidroponik,” J. Teknol. Terpadu, vol. 7, no. 2, pp. 127–134, 2021, doi: 10.54914/jtt.v7i2.430.

N. Evaliana, D. J. Maulana, M. Putri, F. I. Pasaribu, and P. Harahap, “Perancangan Sistem Kontrol Ketinggian Air Pada Media Tanam Hidroponik,” RELE (Rekayasa Elektr. dan Energi) J. Tek. Elektro, vol. 6, no. 1, pp. 36–41, 2023, doi: 10.30596/rele.v6i1.15457.

Susilawati, Dasar - Dasar Bertanam Secara Hidroponik, Edisi Pertama. Palembang: Unsri Press, 2019.

R. E. Putri, H. M. Harahap, and I. Putri, “Pengembangan Sistem Kontrol Nutrisi Budidaya Hidroponik Berbasis IoT (Internet of Things) Sawi Samhong (Brassicasinesis L.),” J. Keteknikan Pertan. Trop. dan Biosist., vol. 11, no. 2, pp. 197–206, 2023, doi: 10.21776/ub.jkptb.2023.011.02.09.

A. N. Sholihah, T. Tohir, and A. R. Al Tahtawi, “Kendali TDS nutrisi hidroponik deep flow technique berbasis IoT menggunakan fuzzy logic,” JITEL (Jurnal Ilm. Telekomun. Elektron. dan List. Tenaga), vol. 1, no. 2, pp. 89–98, 2021, doi: 10.35313/jitel.v1.i2.2021.89-98.

M. M. F. Fatori, “Aplikasi IoT Pada Sistem Kontrol dan Monitoring Tanaman Hidroponik,” J. Pendidik. Sains dan Komput., vol. 2, no. 02, pp. 350–356, 2022, doi: 10.47709/jpsk.v2i02.1746.

A. Prasetyo, A. B. Nugroho, and H. Setyawan, “Perancangan Sistem Monitoring Pada Hidroponik Selada (Lactuca Sativa L.) Dengan Metode NFT Berbasis Internet of Things (IoT),” Technol. dan Sist. Komput., vol. 5, no. Juli, pp. 15–25, 2022.

D. Gude, W. Musa, and S. Abdussamad, “Rancang Bangun Sistem Pengontrol dan Monitoring pH Air Hidroponik Menggunakan Aplikasi Blynk,” Jambura J. Electr. Electron. Eng., vol. 6, no. 1, pp. 57–62, 2024, doi: 10.37905/jjeee.v6i1.20827.

D. Megawati, K. Masykuroh, and D. Kurnianto, “Rancang Bangun Sistem Monitoring PH dan Suhu Air pada Akuaponik Berbasis Internet of Thing (IoT) Design of Monitoring System for PH and Water Temperature in Aquaponic Base on Internet of Thing (IoT),” Telka, vol. 6, no. 2, pp. 124–137, 2020.

I. K. T. A. Putra, I. P. S. Wirawan, and I. A. G. B. Madrini, “Rancang Bangun Sistem Pemantauan Pengendalian Suhu dan Nutrisi Berbasis IoT Pada Hidroponik NFT Tanaman Pakcoy,” J. Beta (Biosistem Dan Tek. Pertan., vol. 10, no. April, pp. 162–174, 2022.

R. Rouhillah, I. Salfikar, and J. Hamar, “Rancang Bangun Alat Monitoring Nutrisi Kebun Hidroponik,” J-Innovation, vol. 10, no. 2, pp. 44–49, 2021, doi: 10.55600/jipa.v10i2.114.

N. Heriyani and S. Ernawati, “Pemanfaatan Teknologi Iot Berbasis Mobile Dalam Upaya Monitoring Kualitas Air Pada Tanaman Hidroponik,” JATI (Jurnal Mhs. Tek. Inform., vol. 8, no. 3, pp. 2807–2813, 2024, doi: 10.36040/jati.v8i3.9273.

F. Susanto, N. K. Prasiani, and P. Darmawan, “Implementasi Internet of Things Dalam Kehidupan Sehari-Hari,” J. Imagine, vol. 2, no. 1, pp. 35–40, 2022, doi: 10.35886/imagine.v2i1.329.

E. Fameska, R. Okra, S. Supriadi, and H. Antoni Musril, “Perancangan Media Pembelajaran Berbasis Game Edukasi Menggunakan Mit App Inventor Pada Pelajaran Pai,” JATI (Jurnal Mhs. Tek. Inform., vol. 7, no. 1, pp. 657–664, 2023, doi: 10.36040/jati.v7i1.6179.



DOI: https://doi.org/10.22146/juliet.v6i1.99431

Article Metrics

Abstract views : 320 | views : 140

Refbacks

  • There are currently no refbacks.


SINTA 4 accredited based on Decree of the Minister of Research, Technology and Higher Education, Republic of Indonesia Number 225/E/KPT/2022, Vol. 2 No. 1 (2020) - Vol. 6 No. 1 (2025)

e-ISSN: 2746-2536