STUDI PENGARUH JARI-JARI DALAM MAGNET TERHADAP TEGANGAN GENERATOR AKSIAL PADA BAHAN CAKRAM AKRILIK

Pebri Prihatmoko; F. Danang Wijaya; Suharyanto Suharyanto

doi:10.22146/teknosains.30958

STUDI PENGARUH JARI-JARI DALAM MAGNET TERHADAP TEGANGAN GENERATOR AKSIAL PADA BAHAN CAKRAM AKRILIK

https://doi.org/10.22146/teknosains.30958

Pebri Prihatmoko^(1*), F. Danang Wijaya⁽²⁾, Suharyanto Suharyanto⁽³⁾

(1) Departemen Teknik Elektro dan Teknologi Informasi Fakultas Teknik Universitas Gadjah Mada
(2) Departemen Teknik Elektro dan Teknologi Informasi Fakultas Teknik Universitas Gadjah Mada
(3) Departemen Teknik Elektro dan Teknologi Informasi Fakultas Teknik Universitas Gadjah Mada
(*) Corresponding Author

Abstract

The high cost of making rotor discs is one aspect that becomes an obstacle in the implementation of axial generator research. This study aims to compare acrylic discs with wooden discs in terms of axial generator output voltage and production costs, so that further research can use alternative discs with lower cost. This study uses an experimental method, where this method is used to find existing variables. On a generator with an acrylic disc, the average voltage is 16.6 volts with a manufacturing cost of 151,500 rupiah. Whereas on generator with wood disc, the average voltage is 17.2 volts with a manufacturing cost of 48,750 rupiah. Thus wood disc can be an alternative material in making cheap axial generator rotor discs.

Keywords

Acrylic Discs; Magnetic Flux; Magnet Permeability; Neodymium Magnet; Wood Discs.

Full Text:

PDF

References

Jacek F. Gieras, Rong-Jie Wang, Maarten J. Kamper, "Axial Flux Permanent Magnet Brushless Machine" 2004.

K. Latoufis, K. Troullaki, T. Pazios, and N. Hatziargyriou, “Design of Axial Flux Permanent Magnet Generators Using Various Magnetic Materials in Locally Manufactured Small Wind Turbines.”2016.

Z. Goryca, “Generators with permanent magnets used in small wind power plants,” pp. 7–10, 2015.

M. Chirca, S. Breban, C. A. Oprea, and M. M. Radulescu, “Analysis of Innovative Design Variations for Permanent-Magnet Generators in Micro-Wind Power Applications,” pp. 385–389, 2014.

V. V. Parlikar, P. M. Kurulkar, K. P. Rathod, and P. Kumari, “An Axial-Flux Permanent Magnet (AFPM) Generator for Defence Applications-Paradigm Shift in Electrical Machine.,” Int. J. Electr. Power Eng., vol. 3, no. 1, pp. 33–37, 2012.

J. Y. Lee, D. H. Koo, S. R. Moon, and C. K. Han, “Design of an axial flux permanent magnet generator for a portable hand crank generating system,” IEEE Trans. Magn., vol. 48, no. 11, pp. 2977–2980, 2012.

CYRO, “Physical Properties of Acrylite FF Acrylic Sheet.”2001.

A. Ramadhan and U. M. Buana, “EKSPLORASI FISIK MATERIAL TRIPLEK,” March, 2017.

J. Sarwono, “Metode Penelitian Kuantitatif & Kualitatif,” in Graha Ilmu, 2006, pp. 1–306.

DOI: https://doi.org/10.22146/teknosains.30958