Pengembangan teknologi tangki pintar sebagai sistem peringatan dini bencana kekeringan

https://doi.org/10.22146/teknosains.69216

Adhy Kurniawan(1), Galih Setyawan(2), Pratama Tirza Surya Sembada(3*), Geradus Nieken Sabian(4)

(1) Universitas Gadjah Mada
(2) Universitas Gadjah Mada
(3) Universitas Gadjah Mada
(4) Universitas Gadjah Mada
(*) Corresponding Author

Abstract


According to the National Disaster Management Agency, in 2021 there were 5,402 incidents recorded, one of them being drought disasters. During the drought, the availability of clean water was minimal, so clean water assistance came from other areas. The problem that is often encountered in the field is delays in water distribution assistance due to sudden information and the location of the aid is in areas that are difficult to reach. This research developed a water tank technology equipped with a sensor to provide information about water availability, the location of the tank placement to speed up information on dropping water in drought areas. This technology uses the NodeMCU ESP8266 module which functions as a microcontroller, to provide sensor-based information that detects the quantity and quality of water as well as the location of the tank. This system is based on the Internet of Things (IoT) and Blynk Android which makes it easier for people to get information in real time. The water availability indicator is presented in a three-color graphical display, namely green is a safe sign (sufficient water), yellow is a warning sign (water is reduced), and red is a sign that water availability is running low and it is necessary to drop clean water. Other information presented is water quality parameters such as pH, TDS, turbidity, and temperature as well as the location of the tank. This technology supports the achievement of SDGs, namely goals number 6 (clean water and proper sanitation) and 11 (sustainable cities and settlements).


Keywords


Bencana Kekeringan; Pemantau Ketersediaan Air; Sensor Ultrasonik

Full Text:

PDF


References

Badan Nasional Penanggulangan Bencana. (2019). Katalog Desa/Kelurahan Rawan Kekeringan.

Badan Nasional Penanggulangan Bencana. (2020). BPPT Kembangkan SMART TMC dan Artificial Intelegent dalam Mitigasi Banjir dan Kekeringan. Https://Bnpb.Go.Id/Berita/Bppt-Kembangkan-Smart-Tmc-Dan-Artificial-Intelegent-Dalam-Mitigasi-Banjir-Dan-Kekeringan.

Bailey, C., Stoyanov, S., Tilford, T., & Tourloukis, G. (2016). 3D-printing and electronic packaging. 2016 Pan Pacific Microelectronics Symposium (Pan Pacific), 1–7. https://doi.org/10.1109/PanPacific.2016.7428385

Irvawansyah, A. A. R. (2018). Prototype Sistem Monitoring dan Pengontrolan Level Tangki Air Berbasis SCADA. Jurnal Teknologi Terapan. ISSN, 1938–2549.

Kurniawan, A., Irsyadi, F., Sembada, T. S. S., Alhudi, T., Hanggara, R. D., & Wijayanti, E. (2022). Sistem pemantau kualitas dan ketersediaan air berbasis internet of things (Patent No. P00202206961).

Kurniawan, A., Setyawan, G., Sembada, P. T. S., & Abieza, T. (2023). Smart Water Tanks as a Drought Early Warning System. (Under Review).

Kurniawan, A., Setyawan, G., Sembada, P. T. S., & Sabian, G. N. (2021). Alat pantau kualitas air pada tandon/tangki penampung air (Patent No. S00202107897).

Kuswinta, A. J., & Arimbawa, I. W. A. (2019). Implementasi IoT cerdas berbasis inference fuzzy Tsukamoto pada pemantauan kadar pH dan ketinggian air dalam akuaponik. Journal of Computer Science and Informatics Engineering (J-Cosine), 3(1), 65–74.

Lewi, E. B., Sunarya, U., & Ramadan, D. N. (2017). Sistem Monitoring Ketinggian Air Berbasis Internet of Things Menggunakan Google Firebase. EProceedings of Applied Science, 3(2).

Nasser, S., Arivarasi, A., & Bansal, K. (2016). Modelling and 3D printing of Packaging for Water Quality Sensor. International Journal of Circuits and Electronics, 1, 134–139.

Permenkes, R. I. (2010). Peraturan Menteri Kesehatan Republik Indonesia Nomor 492/Menkes/Per/IV/2010 Tentang Persyaratan Kualitas Air Minum. Peraturan Mentri Kesehatan Republik Indonesia, 1–12.

Sasmoko, D., Rasminto, H., & Rahmadani, A. (2019). Rancang Bangun Sistem Monitoring Kekeruhan Air Berbasis IoT pada Tandon Air Warga. Jurnal Informatika Upgris, 5(1).

Taufiq, T., & Fadlani, A. (2019). Pengendali Level Air Tandon Otomatis Menggunakan Gelombang Ultrasonik. Progresif: Jurnal Ilmiah Komputer, 14(1).

Wagino, W., & Arafat, A. (2018). Monitoring Dan Pengisian Air Tandon Otomatis Berbasis Arduino. Technologia: Jurnal Ilmiah, 9(3), 192–196.



DOI: https://doi.org/10.22146/teknosains.69216

Article Metrics

Abstract views : 1127 | views : 4180

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright (c) 2023 Adhy Kurniawan et al

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.




Copyright © 2024 Jurnal Teknosains     Submit an Article        Tracking Your Submission

Editorial Policies       Publishing System       Copyright Notice       Site Map       Journal History      Visitor Statistics     Abstracting & Indexing