Bilayer-Structured Regenerated Cellulose/Chitosan Films Prepared with Ionic Liquid
Faisal Amri Tanjung(1*), Yalun Arifin(2), Abdul Hamid Abdullah(3), Iqmal Tahir(4)
(1) Department of Chemical Engineering, Faculty of Engineering and Sciences, Curtin University Sarawak, CDT 250, 98009 Miri, Sarawak, Malaysia
(2) Department of Chemical Engineering, International University Liaison Indonesia, IULI – Eco Campus, The Breeze BSD City, Tangerang Selatan, Indonesia 15345.
(3) Department of Petroleum Engineering, Faculty of Engineering and Sciences, Curtin University Sarawak, CDT 250, 98009 Miri, Sarawak, Malaysia
(4) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Yogyakarta, Indonesia 55281
(*) Corresponding Author
Abstract
The effects of chitosan on properties of regenerated cellulose/chitosan (RC/Ch) films were investigated. The films were prepared using a sequence process of solution-casting in a lithium chloride/N,N-dimethylacetamide ionic liquid, and coagulation in water. Due to the amorphous structure of chitosan and the formation of hydrogen bonding between the functional groups of the both components, tensile strength of the films decreased considerably; however, elongation at break increased. Furthermore, SEM morphology indicated a visible separated layers comprising of rigid and ductile surfaces. The addition of chitosan clearly improved the thermal stability of the films, although the thermal degradation mechanism was not altered.
Keywords
Full Text:
Full Text PDFReferences
[1] Vila, C., Campos, A.R., Cristovão, C., Cunha, A.M., Santos, V., and Parajó, J.C., 2008, Sustainable biocomposites based on autohydrolysis of lignocellulosic substrates, Compos. Sci. Technol., 68 (3-4), 944–952.
[2] Panthapulakkal, S., and Sain, M., 2007, Agro-residue reinforced high-density polyethylene composites: Fiber characterization and analysis of composite properties, Composites Part A, 38 (6), 1445–1454.
[3] Ibrahim, M.M., Dufresne, A., El-Zawawy, W.K., and Agblevor, F.A., 2010, Banana fibers and microfibrils as lignocellulosic reinforcements in polymer composites, Carbohydr. Polym., 81 (4), 811–819.
[4] Ashori, A., and Nourbakhsh, A., 2009, Characteristics of wood–fiber plastic composites made of recycled materials, Waste Manage., 29 (4), 1291–1295.
[5] Amri, F., Huseinsyah, S., and Hussin, K., 2013, Mechanical, morphological and thermal properties of chitosan filled polypropylene composites: The effect of binary modifying agents, Composites Part A, 46, 89–95.
[6] Choi, N.W., Mori, I., and Ohama, Y., 2006, Development of rice husks–plastics composites for building materials, Waste Manage., 26 (2), 189–194.
[7] Bhattacharyya, D., and Jayaraman, K., 2003, Manufacturing and evaluation of woodfibre-waste plastic composite sheets, Polym. Polym. Compos., 11 (6), 433–440.
[8] Gindl, W., and Keckes, J., 2005, All-cellulose nanocomposite, Polymer, 46 (23), 10221–10225.
[9] Bredereck, K., and Hermanutz, F., 2005, Man-made cellulosics, Rev. Prog. Color. Relat. Top., 35 (1), 59–75.
[10] Olivier-Bourbigou, H., Magna, L., and Morvan, D., 2009, Ionic liquids and catalysis: Recent progress from knowledge to applications, Appl. Catal., A, 373 (1-2), 1–56.
[11] Rogers, R.D., and Seddon, K.R., 2003, Ionic liquids - solvents of the future?, Science, 302 (5646), 792–793.
[12] Mahmoudian, S., Wahit, M.U., Ismail, A.F., and Yussuf, A.A., 2012, Preparation of regenerated cellulose/montmorillonite nanocomposite films via ionic liquids, Carbohydr. Polym., 88 (4), 1251–1257.
[13] Sescousse, R., Gavillon, R., and Budtova, T., 2011, Aerocellulose from cellulose–ionic liquid solutions: Preparation, properties and comparison with cellulose–NaOH and cellulose–NMMO routes, Carbohydr. Polym., 83 (4), 1766–1774.
[14] Han, D., and Yan, L., 2010, Preparation of all-cellulose composite by selective dissolving of cellulose surface in PEG/NaOH aqueous solution, Carbohydr. Polym., 79 (3), 614–619.
[15] Zhang, X., Liu, X., Zheng, W., and Zhu, J., 2012, Regenerated cellulose/graphene nanocomposite films prepared in DMAC/LiCl solution, Carbohydrate Polym., 88, 26-30.
[16] Dupont, A.L., 2003, Cellulose in lithium chloride/N,N-dimethylacetamide, optimisation of a dissolution method using paper substrates and stability of the solutions, Polymer, 44 (15), 4117–4126.
[17] Zhao, Q., Yam, R.C.M., Zhang, B., Yang, Y., Cheng, X., and Li, R.K.Y., 2009, Novel all-cellulose ecocomposites prepared in ionic liquids, Cellulose, 16 (2), 217–226.
[18] Yin, J., Luo, K., Chen, X., and Khutoryanskiy, V.V., 2006, Miscibility studies of the blends of chitosan with some cellulose ethers, Carbohydr. Polym., 63 (2), 238–244.
[19] Almeida, E.V.R., Frollini, E., Castellan, A., and Coma, V., 2010, Chitosan, sisal cellulose, and biocomposite chitosan/sisal cellulose films prepared from thiourea/NaOH aqueous solution, Carbohydr. Polym., 80 (3), 655–664.
[20] Wu, Y.B., Yu, S.H., Mi, F.L., Wu, C.W., Shyu, S.S., Peng, C.K., and Chao, A.C., 2004, Preparation and characterization on mechanical and antibacterial properties of chitsoan/cellulose blends, Carbohydr. Polym., 57 (4), 435–440.
[21] Stefanescu, C., Daly, W.H., and Negulescu, I.I., 2009, Nucleophilic reactivity of chitosan in ionic liquids promoted by tert-amines, Polym. Prepr., 50, 551–552.
[22] Phisalaphong, M., and Jatupaiboon, N., 2008, Biosynthesis and characterization of bacteria cellulose–chitosan film, Carbohydr. Polym., 74 (3), 482–488.
[23] Tran, C.D., Duri, S., Delneri, A., and Franko, M., 2013, Chitosan-cellulose composite materials: preparation, characterization and application for removal of microcystin, J. Hazard. Mater., 252-253, 355–366.
[24] Segal, L., Creely, J.J., Martin, A.E.J., and Conrad, C.M., 1959, An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer, Text. Res. J., 29 (10), 786–794.
[25] Liu, Z., Wang, H., Li, Z., Lu, X., Zhang, X., Zhang, S., and Zhou, K., 2011, Characterization of the regenerated cellulose films in ionic liquids and rheological properties of the solutions, Mater. Chem. Phys., 128 (1-2), 220–227.
[26] Da Róz, A.L., Leite, F.L., Pereiro, L.V., Nascente, P.A.P., Zucolotto, V., Oliveira Jr., O.N., and Carvalho, A.J.F., 2010, Adsorption of chitosan on spin-coated cellulose films, Carbohydr. Polym., 80 (1), 65–70.
[27] Ford, E.N.J., Mendon, S.K., Thames, S.F., and Rawlins, J.W., 2010, X-ray diffraction of cotton treated with neutralized vegetable oil-based macromolecular crosslinkers, J. Eng. Fibers Fabr., 5 (1), 10–20.
[28] Ma, H., Zhou, B., Li, H.S., Li, Y.Q., and Ou, S.Y. 2011, Green composite films composed of nanocrystalline cellulose and a cellulose matrix regenerated from functionalized ionic liquid solution, Carbohydr. Polym., 84 (1), 383–389.
[29] Isobe, N., Kim, U.J., Kimura, S., Wada, M., and Kuga, S., 2011, Internal surface polarity of regenerated cellulose gel depends on the species used as coagulant, J. Colloid Interface Sci., 359 (1), 194–201.
[30] Stefanescu, C., Daly W.H., and Negulescu I.I., 2012, Biocomposite films prepared from ionic liquid solutions of chitosan and cellulose, Carbohydr. Polym., 87 (1), 435–443.
[31] Nelson, M.L., and O‘Connor, R.T., 1964, Relation of certain infrared bands to cellulose crystallinity and crystal lattice type. Part II. A new infrared ratio for estimation of crystallinity in celluloses I and II, J. Appl. Polym. Sci., 8 (3), 1311–1324.
DOI: https://doi.org/10.22146/ijc.24310
Article Metrics
Abstract views : 3146 | views : 2723Copyright (c) 2017 Indonesian Journal of Chemistry
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.
View The Statistics of Indones. J. Chem.