Stabilization of Silicone Dioxide Nanoparticle Foam in Tertiary Petroleum Production

https://doi.org/10.22146/ijc.40870

Mohd Zulkifli bin Mohamad Noor(1*), Wong Yi Teng(2), Sonny Irawan(3)

(1) Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak 26300, Gambang, Pahang, Malaysia
(2) Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak 26300, Gambang, Pahang, Malaysia
(3) Department of Petroleum Engineering, Faculty of Engineering, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak Darul Ridzuan, Malaysia
(*) Corresponding Author

Abstract


Nanoparticles have emerged with substantially to the end user and industrial applications. The applications initiated to enhance oil recovery (EOR) and also as alternative solution in increasing the rheological properties of fluids at difference condition. The study aims to evaluate the effects of various surfactant and nanoparticle concentration as well as hydrocarbons on foam stability. Series of static state experiments were conducted to investigate the foam development stability of five different concentrations for surfactant from 0.05 to 0.25 wt.% and nanoparticle from 0 to 1.00 wt.% in the presence of white mineral oil in synthetic brine suspension. By discussing to the Ross-Miles method - half-life capacities (t½), the foam stability of the aqueous foam was expected. Results suggested that the foam stability is increase with the present of nanoparticle. The 0.5 wt.% SiO2 nanoparticles enhanced foam formed the most lasting in the absence of white mineral oil as its t½ in presence of oil is 0.6 times smaller than in the absence of oil. It is concluded that the presence of nanoparticles for surfactant foam stability can be enhanced. The used of nanoparticles can be further study with different type of nanoparticles, only with small amount of nanoparticles used can further stabilize the foam.

Keywords


enhanced oil recovery; half-life measurements; mobility ratio; rheological

Full Text:

Full Text PDF


References

[1] Liu, Q., Zhang, S., Sun, D., and Xu, J., 2010, Foams stabilized by Laponite nanoparticles and alkylammonium bromides with different alkyl chain lengths, Colloids Surf., A, 355 (1-3), 151–157.

[2] Schramm, L.L., and Wassmuth, F., 1994, Foams: Basic principles, Adv. Chem., 242, 3–45.

[3] Gonzenbach, U.T., Studart, A.R., Tervoort, E., and Gauckler, L.J., 2006, Stabilization of foams with inorganic colloidal particles, Langmuir, 22 (26), 10983–10988.

[4] Grigg, R.B., and Mikhalin, A.A., 2007, Effects of Flow Conditions and Surfactant Availability on Adsorption, International Symposium on Oilfield Chemistry, Society of Petroleum Engineers, 28 February–2 March 2007, Houston, Texas, U.S.A., 1–7.

[5] Isari, A.A., Moradi, S.., Bachari, Z., and Mahmoodi, H., 2017, Application of natural surfactants for enhanced oil recovery-Critical review, The 4th International Conference on Oil, Gas and Petrochemical, Tehran University, 8–9 May 2017, Tehran, Iran.

[6] Horozov, T.S., 2008, Foams and foam films stabilised by solid particles, Curr. Opin. Colloid Interface Sci., 13 (3), 134–140.

[7] Bai, T., Liu, Y., Liu, J., Yu, C., Jiang, W., and Fan, Y., 2019, A comparison of different surfactants on foam stability in foam sclerotherapy in vitro, J. Vasc. Surg., 69 (2), 581–591.

[8] Wang, C., and Li, H.A., 2016, Stability and mobility of foam generated by gas-solvent/surfactant mixtures under reservoir conditions, J. Nat. Gas Sci. Eng., 34, 366–375.

[9] Tang, F.Q., Xiao, Z., Tang, J.A., and Jiang, L., 1989, The effect of SiO2 particles upon stabilization of foam, J. Colloid Interface Sci., 131 (2), 498–502.

[10] Murray, B.S., and Ettelaie, R., 2004, Foam stability: Proteins and nanoparticles, Curr. Opin. Colloid Interface Sci., 9 (5), 314–320.

[11] Agista, M.N., Guo, K., and Yu, Z., 2018, A state-of-the-art review of nanoparticles application in petroleum with a focus on enhanced oil recovery, Appl. Sci., 8 (6), 871.

[12] Hirasaki, G.J., Miller, C.A., and Puerto, M., 2008, Recent advances in surfactant EOR, SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers. 21–24 September 2008, Denver, Colorado, USA.

[13] ASTM Standard D6082-12, 2012, Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils, ASTM International, West Conshohocken, PA.

[14] Nishioka, G., and Ross, S., 1981, A new method and apparatus for measuring foam stability, J. Colloid Interface Sci., 81 (1), 1–7.

[15] Manan, M.A., Farad, S., Piroozian, A., and Esmail, M.J.A., 2015, Effects of nanoparticle types on carbon dioxide foam flooding in enhanced oil recovery, J. Pet. Sci. Technol., 33 (12), 1286–1294.

[16] Eren, T., 2004, Foam Characterization: Bubble Size and Texture Effects, Thesis, Middle East Technical University.

[17] Parida, S.K., Dash, S., Patel, S., and Mishra, B.K., 2006, Adsorption of organic molecules on silica surface, Adv. Colloid Interface Sci., 121 (1-3), 77–110.

[18] Condon, J.B., 2006, “An Overview of Physisorption” in Surface Area and Porosity Determinations by Physisorption: Measurements and Theory, 1st ed., Elsevier Science, Amsterdam, 1–27.

[19] Horozov, T.S., Binks, B.P., Aveyard, R., and Clint, J.H., 2006, Effect of particle hydrophobicity on the formation and collapse of fumed silica particle monolayers at the oil-water interface, Colloids Surf., A, 282-283, 377–386.



DOI: https://doi.org/10.22146/ijc.40870

Article Metrics

Abstract views : 491 | views : 491


Copyright (c) 2019 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 


Indonesian Journal of Chemisty (ISSN 1411-9420 / 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web
Analytics View The Statistics of Indones. J. Chem.