Adsorption of Methyl Orange Dyes on Oriented Co/Fe-MOF Bimetallic Organic Framework in Wastewater Treatment

https://doi.org/10.22146/ijc.75636

Kim Ngan Thi Tran(1*), Cao Phuong Khanh Phan(2), Vuong Thinh Ho(3), Hung Dung Chau(4), Thi Nhu Dung Nguyen(5)

(1) Institute of Applied Technology and Sustainable Development, Nguyen Tat Thanh University, Ho Chi Minh City 70000, Vietnam; Faculty of Environmental and Food Engineering, Nguyen Tat Thanh University, Ho Chi Minh City 70000, Vietnam
(2) Faculty of Chemical Engineering, Ho Chi Minh City University of Technology, Ho Chi Minh City 70000, Vietnam
(3) Institute of Applied Technology and Sustainable Development, Nguyen Tat Thanh University, Ho Chi Minh City 70000, Vietnam
(4) Institute of Applied Technology and Sustainable Development, Nguyen Tat Thanh University, Ho Chi Minh City 70000, Vietnam
(5) Faculty of Environmental and Food Engineering, Nguyen Tat Thanh University, Ho Chi Minh City 70000, Vietnam; Ho Chi Minh City University of Natural Resources and Environment (HCMUNRE), Ho Chi Minh City 70000, Vietnam
(*) Corresponding Author

Abstract


The production of highly efficient and reusable adsorbents that can be used in pigment treatment has been of great scientific interest. Metallic organic frameworks (MOFs) are considered a new type of material with extremely diverse structures and can be used as adsorbents to remove environmental pollutants. The selected Co/Fe-MOF material was synthesized in this study by using the solvent-thermal method. Then, the effects of several influencing factors such as adsorbent dosage, pH, initial concentration of MO, and exposure time on the adsorption capacity of methyl orange (MO) dyes by Co/Fe-MOF were evaluated. Under acidic conditions (pH 4), the effective removal of MO from aqueous solution reached equilibrium after 60 min upon exposure to MO at the concentration of 200 mg/L, and the adsorption capacity was 137.6 mg/g. The two models of adsorption isotherms, Freundlich and Langmuir, showed good compatibility with the experimental data, and the calculated correlation coefficients (R2) were both greater than 0.96. The MO adsorption efficiency was proposed to fit the pseudo-quadratic and pseudo-first-order kinetic models. Therefore, MOF materials can be considered as a potential agent for wastewater treatment, thereby providing a possible solution to solve water pollution.


Keywords


bimetallic-organic framework; adsorption; methylene orange; kinetic model; isotherms model

Full Text:

Full Text PDF


References

[1] Benkhaya, S., M’ rabet, S., and El Harfi, A., 2020, A review on classifications, recent synthesis and applications of textile dyes, Inorg. Chem. Commun., 115, 107891.

[2] Khan, M.S., Khalid, M., and Shahid, M., 2020, What triggers dye adsorption by metal organic frameworks? The current perspectives, Mater. Adv., 1 (6), 1575–1601.

[3] Khan, I., Saeed, K., Zekker, I., Zhang, B., Hendi, A.H., Ahmad, A., Ahmad, S., Zada, N., Ahmad, H., Shah, L.A., Shah, T., and Khan, I., 2022, Review on methylene blue: Its properties, uses, toxicity and photodegradation, Water, 14 (2), 242.

[4] Salama, R.S., Abd El-Hakam, S., Samra, S.E., El-dafrawy, S.M., El-Hakam, S.A., Samra, S.E., El-Dafrawy, S.M., and Ahmed, A.I., 2018, Adsorption, equilibrium and kinetic studies on the removal of methyl orange dye from aqueous solution by the use of copper metal organic framework (Cu-BDC), Int. J. Mod. Chem., 10 (2), 195–207.

[5] Fajriati, I., Mudasir, M., and Wahyuni, E.T., 2019, Adsorption and photodegradation of cationic and anionic dyes by TiO2-chitosan nanocomposite, Indones. J. Chem., 19 (2), 441–453.

[6] Iryani, A., Nur, H., Santoso, M., and Hartanto, D., 2020, Adsorption study of rhodamine B and methylene blue dyes with ZSM-5 directly synthesized from Bangka kaolin without organic template, Indones. J. Chem., 20 (1), 130–140.

[7] Hami, H.K., Abbas, R.F., Azeez, S.A., and Mahdi, N.I., 2021, Azo dye adsorption onto cobalt oxide: Isotherm, kinetics, and error analysis studies, Indones. J. Chem., 21 (5), 1148–1157.

[8] Abednatanzi, S., Gohari Derakhshandeh, P., Depauw, H., Coudert, F.X., Vrielinck, H., Van Der Voort, P., and Leus, K., 2019, Mixed-metal metal-organic frameworks, Chem. Soc. Rev., 48 (9), 2535–2565.

[9] Sun, Q., Liu, M., Li, K., Han, Y., Zuo, Y., Chai, F., Song, C., Zhang, G., and Guo, X., 2017, Synthesis of Fe/M (M = Mn, Co, Ni) bimetallic metal organic frameworks and their catalytic activity for phenol degradation under mild conditions, Inorg. Chem. Front., 4 (1), 144–153.

[10] Nguyen, V.H., Nguyen, T.D., Bach, L.G., Hoang, T., Bui, Q.T.P., Tran, L.D., Nguyen, C.V., Vo, D.V.N., and Do, S.T., 2018, Effective photocatalytic activity of mixed Ni/Fe-base metal-organic framework under a compact fluorescent daylight lamp, Catalysts, 8 (11), 487.

[11] Nguyen, H.T.T., Dinh, V.P., Phan, Q.A.N., Tran, V.A., Doan, V.D., Lee, T., and Nguyen, T.D., 2020, Bimetallic Al/Fe Metal-Organic Framework for highly efficient photo-Fenton degradation of rhodamine B under visible light irradiation, Mater. Lett., 279, 128482.

[12] Tang, J., and Wang, J., 2020, Iron-copper bimetallic metal-organic frameworks for efficient Fenton-like degradation of sulfamethoxazole under mild conditions, Chemosphere, 241, 125002.

[13] Choi, S., Cha, W., Ji, H., Kim, D., Lee, H.J., and Oh, M., 2016, Synthesis of hybrid metal-organic frameworks of {FexMyM′1-x-y}-MIL-88B and the use of anions to control their structural features, Nanoscale, 8 (37), 16743–16751.

[14] Dey, C., Kundu, T., Biswal, B.P., Mallick, A., and Banerjee, R., 2014, Crystalline metal-Organic frameworks (MOFs): Synthesis, structure and function, Acta Crystallogr., Sect. B: Struct. Sci., Cryst. Eng. Mater., 70 (1), 3–10.

[15] Soni, S., Bajpai, P.K., Mittal, J., and Arora, C., 2020, Utilisation of cobalt doped Iron based MOF for enhanced removal and recovery of methylene blue dye from waste water, J. Mol. Liq., 314, 113642.

[16] Nguyen, H.T.T., Tran, K.N.T., Van Tan, L., Tran, V.A., Doan, V.D., Lee, T., and Nguyen, T.D., 2021, Microwave-assisted solvothermal synthesis of bimetallic metal-organic framework for efficient photodegradation of organic dyes, Mater. Chem. Phys., 272, 125040.

[17] Wang, M., Yang, L., Guo, C., Liu, X., He, L., Song, Y., Zhang, Q., Qu, X., Zhang, H., Zhang, Z., and Fang, S., 2018, Bimetallic Fe/Ti-based metal–organic framework for persulfate-assisted visible light photocatalytic degradation of Orange II, ChemistrySelect, 3 (13), 3664–3674.

[18] Ding, L., Zeng, M., Wang, H., and Jiang, X.B., 2021, Synthesis of MIL-101-derived bimetal–organic framework and applications for lithium-ion batteries, J. Mater. Sci.: Mater. Electron., 32 (2), 1778–1786.

[19] Blake, A.B., Yavari, A., Hatfield, W.E., and Sethulekshmi, C.N., 1985, Magnetic and spectroscopic properties of some heterotrinuclear basic acetates of chromium(III), iron(III), and divalent metal ions, J. Chem. Soc., Dalton Trans., 12, 2509–2520.

[20] Cheng, X., Zhang, A., Hou, K., Liu, M., Wang, Y., Song, C., Zhang, G., and Guo, X., 2013, Size- and morphology-controlled NH2-MIL-53(Al) prepared in DMF–water mixed solvents, Dalton Trans., 42 (37), 13698–13705.

[21] Liang, H., Liu, R., Hu, C., An, X., Zhang, X., Liu, H., and Qu, J., 2021, Synergistic effect of dual sites on bimetal-organic frameworks for highly efficient peroxide activation, J. Hazard. Mater., 406, 124692.

[22] Wu, Q., Siddique, M.S., and Yu, W., 2021, Iron-nickel bimetallic metal-organic frameworks as bifunctional Fenton-like catalysts for enhanced adsorption and degradation of organic contaminants under visible light: Kinetics and mechanistic studies, J. Hazard. Mater, 401, 123261.

[23] Wang, Z., Wu, C., Zhang, Z., Chen, Y., Deng, W., and Chen, W., 2021, Bimetallic Fe/Co-MOFs for tetracycline elimination, J. Mater. Sci., 56 (28), 15684–15697.

[24] Shakly, M., Saad, L., Seliem, M.K., Bonilla-Petriciolet, A., and Shehata, N., 2022, New insights into the selective adsorption mechanism of cationic and anionic dyes using MIL-101(Fe) metal-organic framework: Modeling and interpretation of physicochemical parameters, J. Contam. Hydrol., 247, 103977.

[25] Valadi, F.M., Ekramipooya, A., and Gholami, M.R., 2020, Selective separation of Congo Red from a mixture of anionic and cationic dyes using magnetic-MOF: Experimental and DFT study, J. Mol. Liq., 318, 114051.



DOI: https://doi.org/10.22146/ijc.75636

Article Metrics

Abstract views : 1744 | views : 1193


Copyright (c) 2023 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 


Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web
Analytics View The Statistics of Indones. J. Chem.