Green Synthesis of New Heterocyclic Surfactant Compounds by Multicomponent Reactions and Their Antibacterial and Corrosion Inhibitor, Study on Carbon Steel Alloy in Acid Media 2 M HCl

https://doi.org/10.22146/ijc.80347

Raneen Salim Al-Hilfi(1), Najlaa Zaki Al-Ameri(2*), Mouhanad Jwad Al-Asadi(3)

(1) Department of Chemistry, College of Pure Science Education, University of Basrah, Basra 00964, Iraq
(2) Department of Second Party, Basra Oil Company (BOC) Iraqi Oil Ministry, Basra 00964, Iraq
(3) Department of Chemistry, College of Pure Science Education, University of Basrah, Basra 00964, Iraq
(*) Corresponding Author

Abstract


Heterocyclic 1,4-di(1,3,5-dithiazinan-5-yl)benzene (D) and two heterocyclic-cationic Gemini surfactant 5,5'-(1,4-phenylene)bis(5-decyl-1,3,5-dithiazinan-5-ium)bromide (E) and 5,5'-(1,4-phenylene)bis(5-tetradecyl-1,3,5-dithiazinan-5-ium)bromide (F) were prepared and identified by FTIR, 1H-NMR spectroscopies, and GC–MS. Then, they were tested as corrosion inhibitors against carbon steel corrosion in 2.0 M aggressive HCl medium at 25 and 50 °C. They have different carbon chain tails, i.e., E (10 carbons), and F (14 carbons). These new heterocyclic and surfactant categories as corrosion inhibitors. The corrosion process has been studied electrochemically (Tafel Plot). The inhibition efficiency clarified that the decrease in IE(%) is in the order of F > E > D. The biological activity of compounds D and F was investigated using the aforementioned drilling procedure with a cork drill. At a dosage of 3000 mcg/mL, the biological action of compound D demonstrated effective resistance against the two types of negative bacteria. The cation has a diameter of 20 mm against E. coli and 19 mm against S. epidermis bacteria. At the same concentration, the chemical F is solely effective against E. coli with an inhibition diameter of 14 mm.


Keywords


antibacterial; carbon steel alloy; cationic Gemini; cyclothiomethylation; Tafel plot



References

[1] Khabibullina, G.R., Fedotova, E.S., Anpilogova, G.R., Akhmetova, V.R., and Ibragimov, A.G., 2016, Multicomponent cyclothiomethylation of phenylenediamines and 4,4'-diaminodiphenyls with formaldehyde and 1,2-ethanedithiol, Russ. J. Gen. Chem., 86, 1608–1612.

[2] Akhmetova, V.R., Khairullina, R.R., Tyumkina, T.V., Nelyubina, Y.V., Smol’yakov, A.F., Bushmarinov, I.S., Starikova, Z.A., Abdullin, M.F., and Kunakova, R.V., 2010, Cyclothiomethylation of carboxylic acid hydrazides with aldehydes and H2S, Russ. Chem. Bull., 59 (2), 425–433.

[3] Liu, Y., Zhang, H., Liu, Y., Li, J., and Li, W., 2019, Inhibitive effect of quaternary ammonium-type surfactants on the self-corrosion of the anode in alkaline aluminium-air battery, J. Power Sources, 434, 226723.

[4] Pakiet, M., Kowalczyk, I., Leiva Garcia, R., Akid, R., and Brycki, B., 2020, Cationic clevelable surfactants as highly efficient corrosion inhibitors of stainless steel AISI 304: Electrochemical study, J. Mol. Liq., 315, 113675.

[5] Kamal, M.S., Hussein, I., Mahmoud, M., Sultan, A.S., and Saad, M.A.S., 2018, Oilfield scale formation and chemical removal: A review, J. Pet. Sci. Eng., 171, 127–139.

[6] Liu, D., Quan, X., Zhu, H., Huang, Q., and Zhou, L., 2020, Evaluation of modified waste concrete powder used as a novel phosphorus remover, J. Cleaner Prod., 257, 120646.

[7] Tung, N.T., Tran, C.S., Nguyen, T.L., Pham, T.M.H., Chi, S.C., Nguyen, H.A., Bui, Q.D., Bui, D.N., and Tran, T.Q., 2021, Effect of surfactant on the in vitro dissolution and the oral bioavailability of a weakly basic drug from an amorphous solid dispersion, Eur. J. Pharm. Sci., 162, 105836.

[8] Dandigunta, B., Karthick, A., Chattopadhyay, P., and Dhoble, A.S., 2019, Impact of temperature and surfactant addition on milk foams, J. Food Eng., 299, 110509.

[9] Saad, M.A., Abdurahman, N.H., and Mohd Yunus, R., 2021, Synthesis, characterization, and demulsification of water in crude oil emulsion via a corn oil-based demulsifier, Mater. Today: Proc., 42, 251–258.

[10] Lei, Z., Gao H., Chang, X., Zhang, L., Wen, X., and Wang, Y., 2020, An application of green surfactant synergistically metal supported cordierite catalyst in denitration of selective catalytic oxidation, J. Cleaner Prod., 249, 119307.

[11] Vimal Kumar, K., and Appa Rao, B.V., 2019, Phosphorylated xanthan gum, an environment-friendly, efficient inhibitor for mild steel corrosion in aqueous 200 ppm NaCl, Mater. Today: Proc., 15, 155–165.

[12] Azzam, E.M., Abd El-Salam, H.M., Mohamed, R.A., Shaban, S.M., and Shokry, A., 2018, Control the corrosion of mild steel using synthesized polymers based on polyacrylamide, Egypt. J. Pet., 27 (4), 897–910.

[13] Fouda, A.E.A.S., Abd el-Maksoud, S.A., El-Sayed, E.H., Elbaz, H.A., and Abousalem, A.S., 2021, Effectiveness of some novel heterocyclic compounds as corrosion inhibitors for carbon steel in 1 M HCl using practical and theoretical methods, RSC Adv., 11 (31), 19294–19309.

[14] Akhmetova, V.R., Niatshina, Z.T., Starikova, Z.A., Korzhova, L.F., and Ibragimov, A.G., 2011, Thiomethylation of heteroaromatic amines, Russ. J. Org. Chem., 47 (6), 920–927.

[15] Akhmetova, V.R., and Rakhimova, E.B., 2014, One-pot cyclothiomethylation of amines as efficient method for the synthesis of saturated five-, six-, seven-, and eight-membered S,N-heterocycles, Russ. J. Org. Chem., 50, 1711–1731.

[16] Akhmetova, V.R., Nadyrgulova, G.R., Niatshina, Z.T., and Dzhemilev, U.M., 2009, Cyclothiomethylation of primary amines with formaldehyde and hydrogen sulfide to nitrogen- and sulfur-containing heterocycles (Review), Chem. Heterocycl. Compd., 45, 1155–1176.

[17] Shaban, S.M., and Elsharif, A.M., Elged, A.H., Eluskkary, M.M., Aiad, I., and Soliman, E.A., 2021, Some new phospho-zwitterionic Gemini surfactants as corrosion inhibitors for carbon steel in 1.0 M HCl solution, Environ. Technol. Innovation, 24, 102051.

[18] Khafizova, S.R., Akhmetova, V.R., Kunakova, R.V., and Dzhemilev, U.M., 2003, Thiomethylation of aromatic amines: Efficient method for the synthesis of heterocyclic compounds, Russ. Chem. Bull., 52 (8), 817–1821.

[19] Akhmetova, V.R., Akhmadiev, N.S., and Ibragimov, A.G., 2016, Catalytic multimolecular reactions of 1,3-dicarbonyl CH acids with CH2O and S- and N-nucleophiles, Russ. Chem. Bull., 65 (7), 1653–1666.

[20] Akhmetova, V.R., Khabibullina, G.R., Galimzyanova, N.F., and Ibragimov, A.G., 2014, One-pot synthesis and fungicidal activity of 2-(1,5,3-dithiazepan-3-yl)ethanol and N,N′-bis(2-hydroxyethyl)tetrathiadiazacycloalkanes, Russ. J. Appl. Chem., 87 (3) 294–298.

[21] Akhmetova, V.R., Khairullina, R.R., Nadyrgulova, G.R., Kunakova, R.V., and Dzhemilev, U.M., 2008, Multicomponent heterocyclization of carboxamides with H2S and CH2O, Russ. J. Org. Chem., 44 (2), 190–196.

[22] Wang, D., Li, Y., Chen, B., and Zhang, L., 2020, Novel surfactants as green corrosion inhibitors for mild steel in 15% HCl: Experimental and theoretical studies, Chem. Eng. J., 402, 126219.

[23] Loto, C.A., Fayomi, O.S.I., Loto, R.T., and Popoola, A.P.I., 2019, Potentiodynamic polarization and gravimetric evaluation of corrosion of copper in 2 M H2SO4 and its inhibition with ammonium dichromate, Procedia Manuf., 35, 413–418.

[24] Akhmetova, V.R., Akhmadiev, N.S., Zainullin, R.A., Khayrullina, V.R., Mescheryakova, E.S., and Glushkova, N.A., 2020, Synthesis, in vitro and in silico studies of inhibitory activity towards α-amylase of bis-azole scaffolds linked by an alkylsulfanyl chain, Can. J. Chem., 98 (11), 725–735.

[25] Flitt, H.J., and Schweinsberg, D.P., 2005, Evaluation of corrosion rate from polarisation curves not exhibiting a Tafel region, Corros. Sci., 47 (12), 3034–3052.

[26] Markhali, B.P., Naderi, R., Mahdavian, M., Sayebani, M., and Arman, S.Y., 2013, Electrochemical impedance spectroscopy and electrochemical noise measurements as tools to evaluate corrosion inhibition of azole compounds on stainless steel in acidic media, Corros. Sci., 75, 269–279.

[27] Solomon, M.M., and Umoren, S.A., 2015, Electrochemical and gravimetric measurements of inhibition of aluminum corrosion by poly (methacrylic acid) in H2SO4 solution and synergistic effect of iodide ions, Measurement, 76, 104–116.

[28] Liu, Y., Liu, Z., Xu, A., and Liu, X., 2022, Understanding pitting corrosion behavior of AZ91 alloy and its MAO coating in 3.5% NaCl solution by cyclic potentiodynamic polarization, J. Magnesium Alloys, 10 (5), 1368–1380.

[29] El Hajjaji, F., Belghiti, M.E., Drissi, M., Fahim, M., Salim, R., Hammouti, B., Taleb, M., and Nahlé, A., 2019, Electrochemical, quantum calculations and Monte Carlo simulation studies of N1,N2-bis(1-phenylethylidene)ethane-1,2-diamine as a corrosion inhibitor for carbon steel in a 1.0 M hydrochloric acid solution, Port. Electrochim. Acta, 37 (1), 23–42.

[30] El Basiony, N.M., Badr, E.E., Baker, S.A., and El-Tabei, A.S., 2021, Experimental and theoretical (DFT & MC) studies for the adsorption of the synthesized Gemini cationic surfactant based on hydrazide moiety as X-65 steel acid corrosion inhibitor, Appl. Surf. Sci., 539, 148246.

[31] Elged, A.H., Shabana, S.M., Eluskkary, M.M., Aiad, I., Soliman, E.A., Elsharif, A.M., and Kim, D.H., 2021, Impact of hydrophobic tails of new phospho-zwitterionic surfactants on the structure, catalytic, and biological activities of AgNPs, J. Ind. Eng. Chem., 94, 435–447.

[32] Fouda, A.S., Elmorsi, M.A., Shaban, S.M., Fayed, T., and Azazy, O., 2018, Evaluation of N-(3-(dimethyl hexadecyl ammonio) propyl) palmitamide bromide as cationic surfactant corrosion inhibitor for API N80 steel in acidic environment, Egypt. J. Pet., 27 (4), 683–694.

[33] Abd-Elaal, A.A., Elbasiony, N.M., Shaban, S.M., and Zaki, E.G., 2018, Studying the corrosion inhibition of some prepared nonionic surfactants based on 3-(4-hydroxyphenyl) propanoic acid and estimating the influence of silver nanoparticles on the surface parameters, J. Mol. Liq., 249, 304–317.

[34] Mobin, M., and Aslam, R., 2018, Experimental and theoretical study on corrosion inhibition performance of environmentally benign non-ionic surfactants for mild steel in 3.5% NaCl solution, Process Saf. Environ. Prot., 114, 279–295.

[35] Aiad, I., Shaban, S.M., Elged, A.H., and Aljoboury, O.H., 2018, Cationic surfactant based on alignate as green corrosion inhibitors for the mild steel in 1.0 M HCl, Egypt. J. Pet., 27, 877–885.

[36] Deyab, M.A., 2019, Enhancement of corrosion resistance in MSF desalination plants during acid cleaning operation by cationic surfactant, Desalination, 456, 32–37.

[37] Zhou, T., Yuan, J., Zhang, Z., Xin, X., and Xu, G., 2019, The comparison of imidazolium Gemini surfactant [C14-4-C14im]Br2 and its corresponding monomer as corrosion inhibitors for A3 carbon steel in hydrochloric acid solutions: Experimental and quantum chemical studies, Colloids Surf., A, 575, 57–65.

[38] Shaban, S.M., Abd Elsamad, S., Tawfik, S.M., Abdel-Rahman, A.A.H., and Aiad, I., 2020, Studying surface and thermodynamic behavior of a new multi-hydroxyl Gemini cationic surfactant and investigating their performance as corrosion inhibitor and biocide, J. Mol. Liq., 316, 113881.

[39] Chafiq, M., Chaouiki, A., Damej, M., Lgaz, H., Salghi, R., Ali, I.H., Benmessaoud, M., Masroor, S., and Chung, I.M., 2020, Bolaamphiphile-class surfactants as corrosion inhibitor model compounds against acid corrosion of mild steel, J. Mol. Liq., 309, 113070.

[40] Wang, J., Liu, D., Cao, S., Pan, S., Luo, H., Wang, T., Ding, H., Mamba, B.B., and Gui, J., 2020, Inhibition effect of monomeric/polymerized imidazole zwitterions as corrosion inhibitors for carbon steel in acid medium, J. Mol. Liq., 312, 113436.

[41] Srivastava, V., Haque, J., Verma, C., Singh, P., Lgaz, H., Salghi, R., and Quraishi, M.A., 2017, Amino acid-based imidazolium zwitterions as novel and green corrosion inhibitors for mild steel: Experimental, DFT and MD studies, J. Mol. Liq., 244, 340–352.

[42] Arabahmadi, R., 2019, Cobalt(II) complexes derived from azo-azomethine ligands: Synthesis, characterization, solvatochromic, fluorescence, thermal, electrochemical and antimicrobial properties, ChemistrySelect, 4 (17), 4883–4891.

[43] Azam, M., Al-Resayes, S.I., Wabaidur, S.M., Altaf, M., Chaurasia, B., Alam, M., Shukla, S.N., Gaur, P., Albaqami, N.T.M., Islam, M.S., and Park, S., 2018, Synthesis, structural characterization and antimicrobial activity of Cu(II) and Fe(III) complexes incorporating azo-azomethine ligand, Molecules, 23 (4), 813.

[44] Fontana, M.G., and Staehle, R.W., 1980, “Biological Corrosion” in Advances in Corrosion Science and Technology, 1st Ed., Springer, New York, 1–42.

[45] Jone Kirubavathy, S., and Chitra, S., 2017, Structural, theoretical investigations and biological evaluation of Cu(II), Ni(II) and Co(II) complexes of mercapto-pyrimidine Schiff bases, J. Mol. Struct., 1147, 797–809.

[46] Zorofchian Moghadamtousi, S., Abdul Kadir, H., Hassandarvish, P., Tajik, H., Abubakar, S., and Zandi, K., 2014, A review on antibacterial, antiviral, and antifungal activity of curcumin, BioMed Res. Int., 2014, 186864.



DOI: https://doi.org/10.22146/ijc.80347

Article Metrics

Abstract views : 1547 | views : 855 | views : 360


Copyright (c) 2023 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 


Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web
Analytics View The Statistics of Indones. J. Chem.