Comparative Study of Ni-Zn LHS and Mg-Al LDH Adsorbents of Navy Blue and Yellow F3G Dye

https://doi.org/10.22146/ijc.21175

Idha Yulia Ikhsani(1*), Sri Juari Santosa(2), Bambang Rusdiarso(3)

(1) Research Center for Deep Sea, Indonesian Institute of Science, Jl. Y. Syaranamual, Guru-guru, Poka, Ambon 97233
(2) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara PO BOX BLS 21 Yogyakarta 55281
(3) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara PO BOX BLS 21 Yogyakarta 55281
(*) Corresponding Author

Abstract


Adsorption of disperse dyes from wastewater onto Ni-Zn LHS (layered hydroxide salts) and Mg-Al LDH (layered double hydroxides) has been compared in this study. Effects of initial pH solution, contact time and initial dye concentration were investigated. The ability of the adsorbent to be reused was also studied. The results showed that acidic condition was favorable for the adsorption of each dyes onto both adsorbent. The adsorption kinetics was studied using pseudo-first-order, pseudo-second-order and Santosa’s kinetics models. The experimental data fits well with the pseudo-second order kinetic model. The equilibrium adsorption data were analyzed using Langmuir and Freundlich isotherm models. The results showed that adsorption of navy blue onto both adsorbent followed Freundlich isotherm adsorption, while yellow F3G followed Langmuir isotherm adsorption. In the application for the adsorption the wastewater containing dyes, Ni-Zn LHS has a better adsorption capacity of 52.33 mg/g than that of Mg-Al LDH that 30.54 mg/g. Calcination of the adsorbent which has already been used increased the adsorption capacity of Mg-Al LDH to 84.75 mg/g, but decreased the adsorption capacity of the Ni-Zn LHS to 42.65 mg/g.

Keywords


Ni-Zn LHS; Mg-Al LDH; yellow F3G; navy blue

Full Text:

Full Text PDF


References

[1] Hara, T., Ishikawa, M., Sawada, J., Ichikuni, N., and Shimazu, S., 2009, Green Chem., 11 (12), 2034–2040.

[2] Rojas, R., Ulibarri, M.A., Barriga, C., and Rives, V., 2008, Microporous Mesoporous Mater., 112 (1-3), 262–272.

[3] Arizaga, G.G.C., Satyanarayana, K.G., and Wypych, F., 2007, Solid State Ionics, 2007, 178 (15-18), 1143–1162.

[4] Anonymous, Canadian WHMIS, 2011, no. SC 214917 and no. 214923, Canada.

[5] Gerçel, Ö., Gerçel, H.F., Koparal, A.S., and Öğütveren, Ü,B., 2008, J. Hazard. Mater., 160 (2-3), 668–674.

[6] Santosa, S.J., Kunarti, E.S., and Karmanto, 2008, Appl. Surf. Sci., 254 (23), 7612–7617.

[7] Zaghouane-Boudiaf, H., Boutahala, M., and Arab, L., 2012, Chem. Eng. J., 187, 142–149.

[8] Ballesteros, M.A., Ulibarri, M.A., Rives, V., and Barriga, C., 2008, J. Solid State Chem., 181 (11), 3086–3094.

[9] Chang, Q., Zhu, L., Luo, Z., Lei, M., Zhang, S., and Tang, H., 2011, Ultrason. Sonochem., 18 (2), 553–561.

[10] Lv, L., He, J., Wei, M., Evans, D.G., and Duan, X., 2006, Water Res., 40 (4), 735–743.

[11] Ho, Y., 2006, J. Hazard. Mater., B136 (3), 681–689.

[12] Santosa, S.J., 2014, CLEAN – Soil, Air, Water, 42 (6), 760–766.

[13] Isa, M.H., Lang, L.S., Asaari, F.A.H., Aziz, H.A., Ramli, N.A., and Dhas, J.P.A, 2007, Dyes Pigm., 74 (2), 446–453.

[14] Li, Q., Yue, Q., Su, Y., and Gao, B., 2011, Bioresour. Technol., 102 (9), 5290–5296.

[15] Guan, Y., Mao, Y., Wei, D., Wang, X., and Zhu, P., 2013, Korean J. Chem. Eng., 30, 1810–1818.

[16] Alver, E., and Metin, A.U., 2012, Chem. Eng. J., 200-202, 59–67.

[17] Özçimen, D., and Ersoy-Meriçboyu, A., 2009, J. Hazard. Mater., 168 (2-3), 1118–1125.



DOI: https://doi.org/10.22146/ijc.21175

Article Metrics

Abstract views : 2690 | views : 2658


Copyright (c) 2016 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 

Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web Analytics View The Statistics of Indones. J. Chem.