ADSORPTION OF Ca(II), Pb(II) AND Ag(I) ON SULFONATO-SILICA HYBRID PREPARED FROM RICE HULL ASH

https://doi.org/10.22146/ijc.21392

Siti Sulastri(1), Nuryono Nuryono(2*), Indriana Kartini(3), Eko Sri Kunarti(4)

(1) Student of Doctorate Program, Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Yogyakarta
(2) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Yogyakarta, Jl. Sekip Utara, Yogyakarta
(3) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Yogyakarta, Jl. Sekip Utara, Yogyakarta
(4) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Yogyakarta, Jl. Sekip Utara, Yogyakarta
(*) Corresponding Author

Abstract


In this research, adsorption of Ca(II), Pb(II) and Ag(I) in aqueous solution onto sulfonato-silica hybrid (SSH) prepared from rice hull ash (RHA) has been studied. The preparation of SSH adsorbent was carried out by oxidation of mercapto-silica hybrid (MSH) with hydrogen peroxide (H2O2) solution 33%. MSH was prepared, via sol-gel process, by adding 3 M hydrochloric acid solution to mixture of sodium silicate (Na2SiO3) solution and 3(trimethoxysilyl)-1-propanthiol (MPTS) to reach pH of 7.0. Solution of Na2SiO3 was generated from destruction of RHA with sodium hydroxide solution followed with heating at 500 °C for 30 min. The SSH produced was characterized with Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) analyzer, energy dispersive X-ray (EDX) spectroscopy and determination of ion-exchange capacity for sodium ion (Na+). The adsorption of Ag(I) and Ca(II) were conducted in a batch system in various concentrations for one hour. The adsorbent ion was calculated based on difference of concentrations before and after adsorption process determined using atomic absorbance spectrophotometric (AAS) method. The adsorption character was evaluated using model of isotherm Langmuir and Freundlich adsorption to calculate the capacity, constants and energy of adsorption. Result of characterization by EDX and FTIR showed qualitatively that SSH has been successfully synthesized which were indicated by appearance of characteristic absorbance of functional group namely silanol (Si-OH), siloxane (Si-O-Si), methylene (-CH2-) and disappearance of mercapto group (SH). The XRD data showed amorphous structure of SSH, similar to silica gel (SG) and MSH. The study of adsorption thermodynamics showed that oxidation of MSH into SSH increases the ion-exchange capacity for Na+ from 0.123 to 0.575 mmol/g. The change in functional group from silanol to mercapto and from mercapto to sulfonato increases the adsorption capacity of Ca(II). However, the capacity order of adsorbents for both ions of Pb(II) and Ag(I) in aqueous solution is MSH > SG > SSH.

Keywords


adsorption; silica; rice; hybrid; sulfonato

Full Text:

Full Text PDF


References

[1] Wang, B., Szu, S., Greenblatt, M., and Klein, L., 1992, Chem. Mater., 4, 191–197.

[2] Zhien, L., Yihui, S., Xijiang, D., and Jijian, C., 1995, J. Mater. Sci., 30, 2, 390–394.

[3] Naskar, M.K., Chatterjee, M., and Dey. A., Ind. Patent application No. 1270/DEL/01, 2001.

[4] Naskar, M.K., and Chatterjee, M., 2004, J. Eur. Ceram. Soc., 24, 3499–3508.

[5] Samuneva, B., Jambazov, S., Lepkova, D., and Dimitriev, Y., 1990, Ceram. Int., 16, 6, 355–360.

[6] Selvaraj, U., Komarneni, S., and Roy, R., 1990, J. Am. Ceram. Soc., 73, 12, 3663–3669.

[7] Esquena, J., and Solans, C., 2001, Colloids Surf., A, 180, 85–92.

[8] Cestari, A.R., Vieira, E.F.S., Nascimento, A.J.P., de Oliveira, F.J.R., Bruns, R.E., and Airoldi, C., 2001, J. Colloid Interface Sci., 241, 1, 45–51.

[9] Mifune, M., Onada, M., Takatsuki, T., Kanai, T., Iwado, A., Motohashi, N., Haginaka, J., and Saito, Y., 1999, Chem. Pharm. Bull., 47, 3, 346–350.

[10] Arakaki, L.N.H., and Airoldi, C., 2000, Polyhedron, 19, 4, 367–373.

[11] Mifune, M., Shimomura, Y., Saito, Y., Mori, Y., Onoda, M., Iwado, A., Motohashi, N., and Haginaka, J., 1998, Bull. Chem. Soc. Jpn., 71, 1825–1829.

[12] Wilson, K., and Clark, J.H., 1998, J. Chem. Soc., Chem. Commun., 19, 2135–2136.

[13] Price, P.M., Clark, J.H., and Macquarrie, D.J., 2000, J. Chem. Soc. Dalton Trans., 2, 101–110.

[14] Airoldi, C., and de Farias, R.F., 2000, Quim. Nova, 23, 4, 496–503.

[15] Vronkov, M.G., Vlasova, N.N., and Pozhidaev, Y.N., 2000, Appl. Organomet. Chem., 14, 6, 287–303.

[16] Leyden, D.E., Silanes Surfaces and Interfaces, Gordon and Breach, London, 1986.

[17] Lygin, V.L., 1994, Kinet. Catal., 35, 480.

[18] Buszewski, B., Jezierska, M., Wetniak, M., and Berek, D., 1998, J. High Resolut. Chromatogr., 21, 5, 267–281.

[19] Ismail, H.M., Monsour, S.A.A., and Zaki, M.I., 1992, Thermochim. Acta, 202, 269–280.

[20] Takei, T., Eriguchi, E., Fuji, M., Watanabe, T., and Chikazawa, M., 1998, Thermochim. Acta, 308, 1, 139–145.

[21] Oliveira, S.F., Espı´nola, J.G.P., Lemus, W.E.S., de Souza, A.G., and Airoldi, C., 1998, Colloids Surf., A, 136, 151–154.

[22] Butterworth, A.J., Clark, J.H., Walton, P.H., Barlow, S.J., 1996, J. Chem. Soc., Chem. Commun., 27, 48, 1859–1860.

[23] Price, P.M., Clark, J.H., and Macquarrie, D.J., 2010, J. Chem. Soc. Dalton Trans., 101–110.

[24] Azmiyawati, C.,Narsito, and Nuryono, 2005, Indo. J. Chem., 5, 1, 31–35.

[25] Nuryono, Bassir, M., Setyaningsih, A., and Narsito, 2007, Synthesis of Amino-Silica Hybrid from Rice Hull Ash for Heavy Metal Ion Adsorption, Presented at International Conference of Chemical Sciences (ICCS) Held by Department of Chemistry, Universitas Gadjah Mada and School of Chemistry, Universiti Sains Malaysia on 24-25 May 2007, In Yogyakarta, Indonesia

[26] Nuryono, Khasanah, E.N., Trihartono, L., and Narsito, 2007, Adsorption of Heavy Metal Ions on Mercapto-Silica Hybrid Prepared from Rice Hull Ash, Presented Orally on International Conference and Workshop on Basic and Applied Sciences UNAIR-RUG- KNAW-UTM, 6-7 August 2007

[27] Shylesh, S., Sharma, S., Mirajkar, S.P., and Singh, A.P., 2004, J. Mol. Catal. A: Chem., 212, 219–228.

[28] Liu, S., and Chen, T., 2001, Polymer, 42, 7, 3293–3296.

[29] Kalapathy, U., Proctor, A., and Schultz, J., 2000, Bioresour. Technol., 73, 257–262.

[30] Ramesh, A., Hasegawa, H., Sugimoto, W., Maki, T., and Ueda, K., 2008, Bioresour. Technol., 99, 3801–3809.



DOI: https://doi.org/10.22146/ijc.21392

Article Metrics

Abstract views : 2006 | views : 1595


Copyright (c) 2011 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 

Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web Analytics View The Statistics of Indones. J. Chem.