CONTROLLING FACTOR IN ALUMINA PILLARED SAPONITE AND ALUMINA PILLARED MONTMORILLONITE SYNTHESIS

https://doi.org/10.22146/ijc.21557

Is Fatimah(1*), Narsito Narsito(2), Karna Wijaya(3)

(1) Chemistry Dept., Islamic University of Indonesia, Kampus Terpadu UII, Jl. Kaliurang Km.14, Besi, Yogyakarta 55581
(2) Chemistry Dept., Gadjah Mada University, Sekip Utara Bls 21, Yogyakarta
(3) Chemistry Dept., Gadjah Mada University, Sekip Utara Bls 21, Yogyakarta
(*) Corresponding Author

Abstract


The effect of synthesis parameters to the physical properties of pillared saponite and pillared montmorillonite was examined. Mol ratio of Al to clay mass in the range 1.0 - 5.0 and two different calcination methods; conventional calcination and microwave irradiation method are evaluated as controlling factors to evolution of basal spacing d001 , surface acidity, specific surface area, pore distribution and catalytic activity in phenol hydroxylation reaction. XRD, FTIR, and N2-adsorption/desorption analysis were used to characterize the materials. Results showed that pillarization produced higher basal spacing d001 and surface acidity and crystalinity of materials in all Al/clay ratio and in both of the calcination methods. In general, Al to clay mass ratio and calcination method remarkably influence to the basal spacing d001, surface acidity and material crystallinity, but the effect of these factors to catalyst activity in phenol hydroxylation depends on nature of clay. It is concluded that the activity as catalyst is affected by the presence of ionic species and surface acidity in the minerals.


Keywords


Pillared smectite; surface acidity; calcination

Full Text:

Full Text PDF


References

[1] Gil, A., Gandia, L.M., and Vicente, M.A., 2007, Catal. RevSci. Eng., 42 (1&2), 145–21.

[2] Kloprogge, J.T., 1998, J. Por. Mat., 5, 5-51.

[3] Kloprogge, J.T., Frost, R.L., and Fry, R., 1999, Analyst, 124, 381–384.

[4] Fetter, G., Hernández, H., Rodríguez, H., Valenzuela, M.A., Lara, B.H., and Bosch, P., 2003, Mat.Let, 57, 1220–1223.

[5] Ortiz, M.J., Fetter, G., Domınguez, J., Banda, J.A., and Gomez, R., 2003, Micromeso, 58, 73–80.

[6] Vicente, M.A., Belver, C., Trujillano, R., Rivesa, V., Álvarez, A., Lambert, J.F., Korili, S.A., Gand´ıa, L.M., and Gil, A., 2004, Applied Catalysis A: General , 267, 47–58.

[7] Budjak, J. and Iyi, N., 2002, Clays and Clay Minerals, 50 (4), 446–454.

[8] Ruiz, J., Ruiz, V., Airoldi, C., and Pastore, H., 2004, App. Catal. A: General, 261, 87–90.

[9] Kahr, G. and Madsen, F.T., 1995, App.Clay Sci., 9, 327-336

[10] Andres, A.M., Merino, J., Galva´n, J.C., and Hitzky, E.R., 1999, Mat. Res. Bul., 34 (4), 641–651,

[11] Wang, J., Park, N., Jeong, J.C., Choi, J.S., Wei, X.Y, Hong, J., and Lee, C., 2004, Energy & Fuels, 18, 470-476.

[12] Suja, H. and Sugunan, S., 2003, Bull.Catal. Soc India, 2, 194-203.

[13] Castilo, G., Gil, A., and Grange, P., 1999, Clays and Clay Minerals, 44 (5), 706-709.

[14] Carvalho, A.P., Martins, A., Silva, J., Pires, J., Vasques, H., and Carvalho, B., 2003, Clays and Clay Minerals, 51 (3), 340-349.

[15] Ahenach, J., Cool, P., and Vansant, E.F., 2000, Phys. Chem. Chem. Phys., 2, 5750-5755.



DOI: https://doi.org/10.22146/ijc.21557

Article Metrics

Abstract views : 1425 | views : 1136


Copyright (c) 2010 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 

Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web Analytics View The Statistics of Indones. J. Chem.