Synthesis of Fulvic Acid-Coated Magnetite (Fe 3 O 4 –FA) and Its Application for the Reductive Adsorption of [AuCl 4 ] –

Philip Anggo Krisbiantoro; Sri Juari Santosa; Eko Sri Kunarti

doi:10.22146/ijc.24828

Synthesis of Fulvic Acid-Coated Magnetite (Fe₃O₄–FA) and Its Application for the Reductive Adsorption of [AuCl₄]^–

https://doi.org/10.22146/ijc.24828

Philip Anggo Krisbiantoro⁽¹⁾, Sri Juari Santosa^(2*), Eko Sri Kunarti⁽³⁾

(1) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281, Indonesia
(2) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281, Indonesia
(3) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281, Indonesia
(*) Corresponding Author

Abstract

Fulvic acid-coated magnetite (Fe₃O₄–FA) has been synthesized through coprecipitation method using NH₄OH. Synthesis conducted by cheap and environmentally friendly preparation used iron salts and extracted fulvic acid (FA) from Peat soil of Rawa Pening, Central Java, Indonesia. Characterization using FT–IR indicated that the coating of FA on Fe₃O₄ occurred through the formation of chemical bond between iron of Fe₃O₄ and carboxyl group of FA. The XRD measurement indicated that coated Fe₃O₄ successfully dispersed in smaller size than uncoated Fe₃O₄, i.e. from 16.67 to 14.84 nm for Fe₃O₄ and Fe₃O₄–FA, respectively. Synthesized Fe₃O₄–FA has pH_PZC 6.37 and stable at pH > 3.0. The extracted FA has total acidity 866.61 cmol kg^–1, –COOH content 229.77 cmol kg^–1 and –OH content 636.84 cmol kg^–1. Fe₃O₄–FA has total acidity 494.86 cmol kg^–1, –COOH content 67.80 cmol kg^–1 and –OH content 427.06 cmol kg^–1. The adsorption rate constant (k) of [AuCl₄]^– on Fe₃O₄–A according to the Ho kinetic model was 8006.53 g mol^–1 min^–1. The adsorption capacity (q_max) according to Langmuir isotherm model was 1.24 × 10^–4 mol g^–1. The presence of reduction towards the adsorbed [AuCl₄]^– was shown by the appearance of peaks at 2θ: 37.41; 43.66; 64.25, and 76.67° in the XRD diffractogram.

Keywords

magnetite; fulvic acid; gold, adsorption; reduction

Full Text:

Full Text PDF

References

[1] Birloaga, I., De Michelis, I., Ferella, F., Buzatu, M., and Vegliò, F., 2013, Study on the influence of various factors in the hydrometallurgical processing of waste printed circuit boards for copper and gold recovery, Waste Manage., 33 (4), 935–941.

[2] Kotte, P., and Yun, Y.S., 2014, L-cysteine impregnated alginate capsules as a sorbent for gold recovery, Polym. Degrad. Stab., 109, 424–429.

[3] Li, H., Wang, X., Cao, L., Zhang, X., and Yang, C., 2015, Gold-recovery PVDF membrane functionalized with thiosemicarbazide, Chem. Eng. J., 280, 399–408.

[4] Aylmore, M.G., and Muir, D.M., 2001, Thiosulfate leaching of gold: A review, Miner. Eng., 14 (2), 135–174.

[5] Pangeni, B., Paudyal, H., Abe, M., Inoue, K., Kawakita, H., Ohto, K., Adhikaria, B.B., and Alam, S., 2012, Selective recovery of gold using some cross-linked polysaccharide gels, Green Chem., 14, 1917–1927.

[6] Villalobos, L.F., Yapici, T., and Peinemann, K.V., 2014, Poly-thiosemicarbazide membrane for gold recovery, Sep. Purif. Technol., 136, 94–104.

[7] Syed, S., 2012, Recovery of gold from secondary sources-A review, Hydrometallurgy, 115-116, 30–51.

[8] Botz, M.M., Mudder, T.I., and Akcil, A., 2005, “Cyanide Treatment: Physical, Chemical and Biological Processes” in Advances in Gold Ore Processing, Adams, M., ed., Elsevier Ltd., Amsterdam, 672–700.

[9] Fricker, A.G., 1993, Recovery of cyanide in the extraction of gold, J. Cleaner Prod., 1 (2), 77–80.

[10] Mudder, T.I., and Botz, M.M., 2004, Cyanide and society: A critical reviews, Eur. J. Miner. Process. Environ. Prot., 4 (1), 62–74.

[11] Yap, C.Y., and Mohamed, N., 2007, An electro-generative process for the recovery of gold from cyanide solutions, Chemosphere, 67 (8), 1502–1510.

[12] El Ghandoor, H., Zidan, H.M., Khalil, M.M.H., and Ismail, M.I.M., 2012, Synthesis and some physical properties of magnetite (Fe₃O₄) nanoparticles, Int. J. Electrochem. Sci., 7, 5734–5745.

[13] Sun, J., Zhou, S., Hou, P., Yang, Y., Weng, J., Li, X., and Li, M., 2006, Synthesis and characterization of biocompatible Fe₃O₄ nanoparticles, J. Biomed. Mater. Res. Part A, 80 (2), 333–341.

[14] El-kharrag, R., Amin, A., and Greish, Y.E., 2011, Low temperature synthesis of monolithic mesoporous magnetite nanoparticles, Ceram. Int., 38 (1), 627–634.

[15] Lim, S.H., Woo, E.J., Lee, H., and Lee, C.H., 2008, Synthesis of magnetite-mesoporous silica composites as adsorbents for desulfurization from natural gas, Appl. Catal., B, 85 (1-2), 71–76.

[16] Maity, D., and Agrawal, D.C., 2007, Synthesis of iron oxide nanoparticles under oxidizing environment and their stabilization in aqueous and non-aqueous media, J. Magn. Magn. Mater., 308 (1), 46–55.

[17] Zhang, L., He, R., and Gu, H.C., 2006, Oleic acid coating on the monodisperse magnetite nanoparticles, Appl. Surf. Sci., 253 (5), 2611–2617.

[18] Tan, K.H., 1998, Principle of Soil Chemistry, Marcel Dekker, New York.

[19] Buhani, and Suharso, 2006, The influence of pH towards multiple metal ion adsorption of Cu(II), Zn(II), Mn(II), and Fe(II) on humic acid, Indones. J. Chem., 6 (1), 43–46.

[20] Narsito, Santosa, S.J., and Lastuti, S., 2008, Photo-reduction kinetics of MnO₂ in aquatic environments containing humic acids, Indones. J. Chem., 8 (1), 37–41.

[21] Nurmasari, R., Santosa, U.T., Umaningrum, D., and Rohman, T., 2010, Immobilization of humic acid on chitosan beads by protected cross-linking method and its application as sorbent for Pb(II), Indones. J. Chem., 10 (1), 88–95.

[22] Santosa, U.T., Mustikasaria, K., Santosa, S.J., and Siswanta, D., 2007, Study of sensitization of fulvic acid on photoreduction of Cr(VI) to Cr(III) by TiO₂ photocatalyst, Indones. J. Chem., 7 (1), 25–31.

[23] Umaningrum, D., Santosa, U.T., Nurmasari, R., and Yunus, R., 2010, Adsorption kinetics of Pb(II), Cd(II), and Cr(III) on adsorbent produced by protected-crosslinking of humic acid-chitosan, Indones. J. Chem., 10 (1), 80-87.

[24] Carlos, L., Einschlag, F.S.G., González, M.C., and Mártire, D.O., “Applications of Magnetite Nanoparticles for Heavy Metal Removal from Wastewater“ in Waste Water: Treatment Technologies and Recent Analytical Developments, Eds. Einschlag, F.S.G., and Carlos, L., InTech, Croatia, 2013, 63–77.

[25] Koesnarpadi, S., Santosa, S.J., Siswanta, D., and Rusdiarso, B., 2015, Synthesis and characterization of magnetite nanoparticle coated humic acid (Fe₃O₄/HA), Procedia Environ. Sci., 30, 103–108.

[26] Illés, E., and Tombácz, E., 2003, The role of variable surface charge and surface complexation in the adsorption of humic acid on magnetite, Colloids Surf., A, 230 (1-3), 99–109.

[27] Illés, E., and Tombácz, E., 2006, The effect of humic acid adsorption on pH-dependent surface charging and aggregation of magnetite nanoparticles, J. Colloid Interface Sci., 295 (1), 115–123.

[28] Skogerboe, R.K., and Wilson, S.A., 1981, Reduction of ionic species by fulvic acid, Anal. Chem., 53 (2), 228–232.

[29] Jayaganesh, S., and Senthurpandian, V.K., 2010, Extraction and characterization of humic and fulvic acids from latosols under tea cultivation in South India, Asian J. Earth. Sci., 3 (3), 130–135.

[30] Liu, J.F., Zhao, Z.S., and Hang, G.B., 2008, Coating Fe₃O₄ magnetic nanoparticles with humic acid for high efficient removal of heavy metals in water, Environ. Sci. Technol., 42 (18), 6949–6954.

[31] Peng, L., Qin, P., Lei, M., Zeng, Q., Song, H., Yang, J., Shao, J., Liao, B., and Gu, J., 2012, Modifying Fe₃O₄ nanoparticles with humic acid for removal of Rhodamine B in water, J. Hazard. Mater., 209-210, 193–198.

[32] Niu, H., Zhang, D., Zhang, S., Zhang, X., Meng, Z., and Cai, Y., 2011, Humic acid coated Fe₃O₄ magnetic nanoparticles as highly efficient Fenton-like catalyst for complete mineralization of sulfathiazole, J. Hazard. Mater., 190 (1-3), 559–565.

[33] Petcharoen, K., and Sirivat, A., 2012, Synthesis and characterization of magnetite nanoparticles via the chemical co-precipitation method, Mater. Sci. Eng., B, 177 (5), 421–427.

[34] Stevenson, F.J., 1994, Humus Chemistry, 2^nd ed., John Wiley and Sons., New York, 512.

[35] Laurent, S., Forge, D., Port, M., Roch, A., Robic, C., Vander Elst, L., and Muller, R.N., 2008, Magnetic iron oxide nanoparticles: Synthesis, stabilization, vectorization, physic chemical characterizations and biological applications, Chem. Rev., 108 (6), 2064–2110.

[36] Hasnah, S.D., and Ridwan, 2012, Sintesis dan Karakterisasi Nanopartikel Fe₃O₄ Magnetik untuk Adsorpsi Kromium Heksavalen, JUSAMI, 13 (2), 136–140.

[37] Ho, Y.S., 2006, Review of second-order models for adsorption systems, J. Hazard. Mater., 136 (3), 681–689.

[38] Santosa, S.J., Sudiono, S., and Shiddiq, Z., 2007, Effective humic acid removal using Zn/Al layered double hydroxide anionic clay, J. Ion Exchange, 18 (4), 322–327.

[39] Santosa, S.J., Siswanta, D., Sudiono, S., and Utarianingrum, R., 2008, Chitin-humic acid hybrid as adsorbent for Cr(III) in effluent of tannery wastewater treatment, Appl. Surf. Sci., 254 (23), 7846–7850.

[40] Hamamoto, K., Kawakita, H., Ohto, K., and Inoue, K., 2009, Polymerization of phenol derivatives by the reduction of gold ions to gold metal, React. Funct. Polym., 69(9), 694–697.

DOI: https://doi.org/10.22146/ijc.24828

Article Metrics

Abstract views : 4003 |

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

View The Statistics of Indones. J. Chem.

Username
Password
Remember me

Indones. J. Chem. indexed by: