The Influence of Permanganate Enhancement to Graphite on Chemical Structure and Properties of Graphene Oxide Material Generated by Improved Tour Method

Dyah Ayu Fatmawati(1*), Triyono Triyono(2), Wega Trisunaryanti(3), Haryo Satriya Oktaviano(4), Uswatul Chasanah(5)

(1) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, 55281 Yogyakarta, Indonesia
(2) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, 55281 Yogyakarta, Indonesia
(3) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, 55281 Yogyakarta, Indonesia
(4) Department of Chemistry, Faculty of Science and Computer, Universitas Pertamina, Simprug, Kebayoran Lama, Jakarta Selatan, DKI Jakarta, 12220, Indonesia Research & Technology Center, PT. Pertamina (Persero), Sopo Del Tower A, Floor 51, Jl. Mega Kuningan Barat III, Kawasan Mega Kuningan, Jakarta Selatan, DKI Jakarta, 12950, Indonesia
(5) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, 55281 Yogyakarta, Indonesia
(*) Corresponding Author


Synthesis of graphene oxide (GO) material with variations in permanganate/graphite ratio has been carried out. This research purposes to study the impact of increasing oxidizing agents to graphite on the chemical structure and properties of the GO material produced. All GOs were synthesized using the improved Tour method with three variations of permanganate/graphite ratios of 5, 6, and 7. The results obtained include GO-5, GO-6, and GO-7, respectively, having a d spacing value of 0.843; 0.891; 0.894 nm by XRD analysis and 0.768; 0.756; 0.772 nm by SAED analysis. Based on the FTIR data, all GO materials bring up the peaks of oxygen-functionalized carbon absorption such as O–H, C–H sp3, C=O, C–O–C of ether and ester, and C-OH for carboxylic acids and alcohols. The oxidation levels (O/C ratio taken from EDX data) of GO-5, GO-6, and GO-7 are 0.67, 0.88, and 1.50, respectively. SEM images display the appearance of an exfoliated layer with a wrinkled and irregular surface. TEM images show thin and transparent layers. The main peaks with the highest absorbance at the wavelength around 230-240 nm, meanwhile the band gap energy produced was 3.53; 3.71; 3.55 eV for GO-5, GO-6, and GO-7, respectively.


chemical properties; chemical structure; graphene oxide; improved tour method; permanganate/graphite ratio

Full Text:

Full Text PDF


[1] Nika, D.L., Cocemasov, A.I., and Balandin, A.A., 2017, “Two-dimensional thermal transport in graphene” in Thermal Transport in Carbon-Based Nanomaterials, 1st Ed., Eds., Zhang, G., Elsevier Science, Amsterdam, Netherlands, 57–84.

[2] Khan, M., Tahir, M.N., Adil, S.F., Khan, H.U., Siddiqui, M.R.H., Al-warthan, A.A., and Tremel, W., 2015, Graphene-based metal and metal oxide nanocomposites: Synthesis, properties, and their applications, J. Mater. Chem. A, 3 (37), 18753–18808.

[3] Zhu, J., Duan, R., Zhang, S., Jiang, N., Zhang, Y., and Zhu, J., 2014, The application of graphene in lithium-ion battery electrode materials, SpringerPlus, 3(1), 585.

[4] Nag, A., Mitra, A., and Mukhopadhyay, S.C., 2018, Graphene and its sensor-based applications: A review, Sens. Actuators, A, 270, 177–194.

[5] Yang, W., Ni, M., Ren, X., Tian, Y., Li, N., Su, Y., and Zhang, X., 2015, Graphene in supercapacitor applications, Curr. Opin. Colloid Interface Sci., 20 (5-6), 416–428.

[6] Li, J., Zhao, Z., Ma, Y., and Qu, Y., 2017, Graphene and their hybrid electrocatalysts for water splitting, ChemCatChem, 9 (9), 1554–1568.

[7] Velasco-Soto, M.A., Pérez-García, S.A., Alvarez-Qiuntana, J.A., Cao, Y., Nyborg, L., and Licea-Jiménez, L., 2015, Selective band gap manipulation of graphene oxide by its reduction with mild reagents, Carbon, 93, 967–973.

[8] Luong, D.X., Bets, K.V., Algozeeb, W.A., Stanford, M.G., Kittrell, C., Chen, W., Salvatierra, R.V., Ren, M., McHugh, E.A., Advincula, P.A., Wang, Z., Bhatt, M., Guo, H., Mancevski, V., Shahsavari, R., Yakobson, B.I., and Tour, J.M., 2020, Gram-scale bottom-up flash graphene synthesis, Nature, 577 (7792), 647–651.

[9] Eswaraiah, V., Aravind, S.S.J., and Ramaprabhu, S., 2011, Top-down method for synthesis of highly conducting graphene by exfoliation of graphite oxide using focused solar radiation, J. Mater. Chem., 21 (19), 6800–6803.

[10] Yi, M., and Shen, Z., 2015, A review on mechanical exfoliation for the scalable production of graphene, J. Mater. Chem. A, 3 (22), 11700–11715.

[11] Chowdhury, D.R., Singh, C., and Paul, A., 2014, Role of graphite precursor and sodium nitrate in graphite oxide synthesis, RSC Adv., 4 (29), 15138–15145.

[12] Wang, S., Dong, Y., He, C., Gao, Y., Jia, N., Chen, Z., and Song, W., 2017, The role of sp2/sp3 hybrid carbon regulation in the nonlinear optical properties of graphene oxide materials, RSC Adv., 7 (84), 53643–53652.

[13] Li, B., Yin, J., Liu, X., Wu, H., Li, J., Li, X, and Guo, W., 2019, Probing van der Waals interactions at two-dimensional heterointerfaces, Nat. Nanotechnol., 14 (6), 567–572.

[14] Acik, M., Mattevi, C., Gong, C., Lee, G., Cho, K., Cho, K., Chhowalla, M., and Chabal, Y.J., 2010, The role of intercalated water in multilayered graphene oxide, ACS Nano, 4 (10), 5861–5868.

[15] Brisebois, P.P., and Siaj, M., 2019, Harvesting graphene oxide-years 1859 to 2019: A review of its structure, synthesis, properties and exfoliation, J. Mater. Chem. C, 8 (5), 1517–1547.

[16] Lojka, M., Lochman, B., Jankovsky, O., Jiříčková, A., Sofer, Z., and Sedmidubský, D., 2019, Synthesis, composition, and properties of partially oxidized graphite oxides, Materials, 12 (15), 2367.

[17] Ranjan, P., Agrawal, S., Sinha, A., Rao, T.R., Balakrishnan, J., and Thakur, A.D., 2018, A low-cost non-explosive synthesis of graphene oxide for scalable applications, Sci. Rep., 8 (1), 12007.

[18] Qiu, Y., Yu, Y., Zhang, L., Qian, Y., and Ouyang, Z., 2016, An investigation of reverse flotation separation of sericite from graphite by using a surfactant: MF, Minerals, 6 (3), 57.

[19] Kamakshi, T., Sundari, G.S., Erothu, H., and Rao, T.P., 2018, Synthesis and characterization of graphene-based iron oxide (Fe3O4) nanocomposites, Rasayan J. Chem., 11 (3), 1113–1119.

[20] Krishnamoorthy, K., Veerapandian, M., Yun, K., and Kim, S.J., 2013, The chemical and structural analysis of graphene oxide with different degrees of oxidation, Carbon, 53, 38–49.

[21] Wu, R., Wang, Y., Chen, L., Huang, L., and Chen, Y., 2015, Control of the oxidation level of graphene oxide for high-efficiency polymer solar cells, RSC Adv., 5 (61), 49182–49187.

[22] Kumar, R., Kumar, R.M., Bera, P., Ariharan, S., Lahiri, D., and Lahiri I., 2017, Temperature-time dependent transmittance, sheet resistance and bonding energy of reduced graphene oxide on soda lime glass, Appl. Surf. Sci., 425, 558–563.

[23] Dimiev, A.M., and Eigler, S., 2016, Graphene Oxide: Fundamentals and Applications, 1st Ed., John Wiley & Son, Hoboken, New Jersey, US.

[24] Jin, Y., Zheng, Y., Podkolzin, S.G., and Lee, W., 2020, Bandgap of reduced graphene oxide tuned by controlling functional groups, J. Mater. Chem. C, 8 (14), 4885–4894.

[25] Hidayah, N.M.S., Liu, W.W., Lai, C.W., Noriman, N.Z., Khe, C.S., Hashim, U., and Lee, H.C., 2017, Comparison on graphite, graphene oxide and reduced graphene oxide: Synthesis and characterization, AIP Conf. Proc., 1892, 150002.

[26] Chen, J., Yao, B., Li, C., and Shi, G., 2013, An improved Hummers method for eco-friendly synthesis of graphene oxide, Carbon, 64, 225–229.

[27] Dillon, R.O., Spain, I.L., and McClure, J.W., 1977, Electronic energy band parameters of graphite and their dependence on pressure, temperature, and acceptor concentration, J. Phys. Chem. Solids, 38 (6), 635–645.

[28] Gong, J.H., Lin, S.X., Li, W., and Gao, J., 2012, Difference in electronic structure between diamond and graphite, Appl. Mech. Mater., 229-231, 74–77.

[29] Hunt, A., Kurmaev, E.Z., and Moewes, A., 2014, Bandgap engineering of graphene oxide by chemical modification, Carbon, 75, 366–371.

[30] Hasan, M.T., Senger, B.J., Ryan, C., Culp, M., Gonzalez-Rodriguez, R., Coffer, J.L., and Naumov, A.V., 2017, Optical band gap alteration of graphene oxide via ozone treatment, Sci. Rep., 7 (1), 6411.

[31] Zekry, A., Shaker, A., and Salem, M., 2018, “Solar cells and arrays: Principles, analysis, and design” in Advances in Renewable Energies and Power Technologies, Eds. Yahyaoui, I., Elsevier Science, Amsterdam, Netherlands, 3–56.


Article Metrics

Abstract views : 3004 | views : 2644

Copyright (c) 2021 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.


Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Analytics View The Statistics of Indones. J. Chem.