The Atmospheric Corrosion of Structural Steel after Exposure in the Palm Oil Mill Industry Area of Aceh-Indonesia

https://doi.org/10.22146/ijc.62769

Muhammad Zulfri(1), Nurdin Ali(2*), Husaini Husaini(3), Sri Mulyati(4), Iskandar Hasanuddin(5)

(1) Department of Mechanical Engineering, Universitas Samudra, Langsa, 24416, Indonesia
(2) Department of Mechanical & Industrial Engineering, Universitas Syiah Kuala, Banda Aceh 23111, Indonesia
(3) Department of Mechanical & Industrial Engineering, Universitas Syiah Kuala, Banda Aceh 23111, Indonesia
(4) Department of Chemical Engineering, Universitas Syiah Kuala, Banda Aceh 23111, Indonesia
(5) Department of Mechanical & Industrial Engineering, Universitas Syiah Kuala, Banda Aceh 23111, Indonesia
(*) Corresponding Author

Abstract


The major cause of early failure in the infrastructures of the palm oil industry in Aceh, Indonesia has been discovered to be the corrosion caused by air pollution from exhaust fumes of the factory plants. Therefore, this research was conducted to analyze the effect of the atmospheric corrosion of the structural steel used in the palm oil mill industry. The five types of structural steel used as samples include strip, l-shape, round bar, plate, and SAPH 610 low carbon steel with a carbon content of 0.18%. These specimens were cleansed from dirt, scaled, and rubbed with sandpaper to achieve a grid of 600, later washed with fresh water and rinsed with alcohol, and subsequently exposed to the environment in PT ASN and PT AKTS palm oil mills for 12 months. Moreover, they were placed on a measuring tray for exposure and the corrosion rate was recorded once a month using the mass loss method in line with the ASTM G50. The results showed the steel construction with a round bar shape was more resistant to atmospheric corrosion and the remaining samples were also observed to be safe and relatively resistant based on their classification as being outstanding (< 1 mpy).

Keywords


structural steel; air pollution; weight loss; corrosion rate; atmospheric corrosion

Full Text:

Full Text PDF


References

[1] Khatiwada, D., Palmén, C., and Silveira, S., 2021, Evaluating the palm oil demand in Indonesia: production trends, yields, and emerging issues, Biofuels, 12 (2), 135–147.

[2] Hanafiah, J., 2016, Palm oil expands in Aceh, Mongabay Series: Indonesian Forests, Indonesian Palm Oil, Leuser Ecosystem, https://news.mongabay.com/2016/01/palm-oil-expands-in-aceh/.

[3] Syahza, A., 2019, The potential of environmental impact as a result of the development of palm oil plantation, Manage. Environ. Qual., 30 (5), 1072–1094.

[4] Badrun, Y., 2010, Emisi udara industry pengolahan kelapa sawit di kabupaten Rokan Hilir, Photon: Jurnal Sain Dan Kesehatan, 1 (1), 23-29.

[5] Roberge, P.R., 2000, Handbook of Corrosion Engineering, 2nd Ed, McGraw-Hill, New York.

[6] Revie, R.W., and Uhlig H.H., 2008, Corrosion and Corrosion Control: An Introduction to Corrosion Science and Engineering, 4th Ed., John Wiley & Sons, Inc., Canada.

[7] Ali, N., Fulazzaky, M.A., Mustapa, M.S., Ghazali, M.I., Ridha, M., and Sujitno, T., 2014, Assessment of fatigue and corrosion fatigue behaviours of the nitrogen ion implanted Cp Ti, Int. J. Fatigue, 61, 184–190.

[8] Ali, N., Putra, T.E., Iskandar, V.Z., and Ramli, M., 2020, A simple empirical model for predicting weight loss of mild steel due to corrosion in NaCl solution, Int. J. Automot. Mech. Eng., 17 (1), 7784–7792.

[9] Martinez, C., Briones, F., Villarroel, M., and Vera, R., 2018, Effect of atmospheric corrosion on the mechanical properties of SAE 1020 structural steel, Materials, 11 (4), 591.

[10] Ghahari, M., Rashid-Nadimi, S., and Bemana, H., 2019, Metal-air desalination battery: Concurrent energy generation and water desalination, J. Power Sources, 412, 197–203.

[11] Ismail. A., Mahari, S., Shamsuddin, F., Hasan, N., and Ramli N., 2019, Evaluation of corrosion product formed on carbon steel in recycled sour water of overhead system, Int. J. Integr. Eng., 11 (7), 95–101.

[12] Ismail, A., and Adan, N.H., 2014, Effect of Oxygen Concentration on Corrosion Rate of Carbon Steel in Seawater, Am. J. Eng. Res., 03 (1), 64–67.

[13] Möller, H., Boshoff, E.T., and Froneman, H., 2006, The corrosion behaviour of a low carbon steel in natural and synthetic seawaters, J. South. Afr. Inst. Min. Metall., 106 (8), 585–592.

[14] Ali, N., Putra, T.E., Husaini, Iskandar, V.Z., and Thalib, S., 2019, Corrosion rate of mild steel for construction materials in various NaCl concentrations, IOP Conf. Ser.: Mater. Sci. Eng., 536, 012015.

[15] Tjahjanti, P.H., Darminto, Nugroho, W.H., and Ganda, A.N.F., 2019, Study of corrosion penetration rate on composite materials EN AC-43100 (AlSi10Mg (b)) + SiC*, Int. J. Integr. Eng., 11 (6), 1-9.

[16] Priyotomo, G., Nuraini, L., Prifiharni, S., Royani, A., Sundjono, Gunawan, H., and Zheng, M., 2020, Atmospheric corrosion behavior of carbon steel and galvanized steel after exposure in Eretan and Ciwaringin, West Java Province, Indonesia, Indones. J. Chem., 20 (5), 1032–1043.

[17] Zulfri, M., Ali, N., Husaini, Fonna, S., Huzni, S., Mulyati, S., and Cut, B., 2019, Atmospheric corrosion assessment of structural steel exposed in the environment of palm oil processing (PKS) industry around coastal zone, IOP Conf. Ser.: Mater. Sci. Eng., 536, 012016.

[18] Marzorati, S., Verotta, L., and Trasatti, S.P., 2019, Green Corrosion Inhibitors from Natural Sources and Biomass Wastes, Molecules, 24 (1), 48.

[19] De la Fuente, D., Alcántara, J., Chico B., Díaz, I., Jiménez, J.A., and Morcillo, M., 2016 Characterisation of rust surfaces formed on mild steel exposed to marine atmospheres using XRD and SEM/Micro-Raman techniques, Corros. Sci., 110, 253–264.

[20] Nuraini, L., Prifiharni, S., Priyotomo, G., Sundjono, Gunawan, H., and Purawiardi, I., 2018, Atmospheric corrosion performance of different steels in early exposure in the coastal area region West Java, Indonesia, AIP Conf. Proc., 1964, 020040.

[21] Shafiei, E., Zeinali, M., Nasiri, A., Charroostaei, H., and Gholamalian, M.A., 2014, A brief review on the atmospheric corrosion of mild steel in Iran, Cogent Eng., 1 (1), 990751.

[22] Ridha, M., Fonna, S., Huzni, S., Supardi, J., and Ariffin, A.K., 2013, Atmospheric corrosion of structural steels exposed in the 2004 tsunami-affected areas of Aceh, Int. J. Automot. Mech. Eng., 7, 1014–1022.

[23] Castaño, J.G., Botero, C.A., Restrepo, A.H., Agudelo, E.A., Correa, E., and Echeverría, F., 2010, Atmospheric corrosion of carbon steel in Colombia, Corros. Sci., 52 (1), 216–223.

[24] Dugstad, A., Halseid, M., and Morland, B., 2013, Effect of SO2 and NO2 on corrosion and solid formation in dense phase CO2 pipelines, Energy Procedia, 37, 2877–2887.

[25] ASTM G50-10, 2010, Standard Practice for Conducting Atmospheric Corrosion Tests on Metal, ASTM International, Barr Harbor Drive, West Conshohocken, PA, 1–15.

[26] Antunes, R.A., Ichikawa, R.U., Martinez, L.G., and Costa, I., 2014, Characterization of corrosion products on carbon steel exposed to natural weathering and to accelerated corrosion tests, Int. J. Corros., 2014, 419570.

[27] Pessu, F.M, Barker, R., and Neville A., 2016, Understanding pitting corrosion behavior of X-65 carbon steel in CO2-saturated environments: The temperature effect, Corrosion, 72 (1), 78–94.

[28] Montoya, P., Marín, T., Echavarría, A., and Calderón, J.A., 2013, Influence of anion and pH on the electrochemical Co-deposition and transformation of iron oxy-hydroxide, Int. J. Electrochem. Sci., 8, 12566–12579.

[29] Morcillo, M., de la Fuente, D., Díaz, I., and Cano, H., 2011, Atmospheric corrosion of mild steel, Rev. Metal., 47 (5), 426–444.

[30] Thalib, S., Ikhsan, M., Fonna, S., Huzni, S., and Syahrir, 2018, Identification of corrosion product on medium carbon steel under the exposure of Banda Aceh’s atmosphere, IOP Conf. Ser.: Mater. Sci. Eng., 352, 012004.



DOI: https://doi.org/10.22146/ijc.62769

Article Metrics

Abstract views : 4020 | views : 2171


Copyright (c) 2021 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 


Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web
Analytics View The Statistics of Indones. J. Chem.