CuO, MgO, and ZrO2 Loading on HZSM5 by Deposition-precipitation: Study of Crystallinity, Specific Surface Area, and Morphology

https://doi.org/10.22146/ijc.72255

Rizky Ibnufaatih Arvianto(1), Anatta Wahyu Budiman(2*), Khoirina Dwi Nugrahaningtyas(3)

(1) Department of Chemical Engineering, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami 36A, Kentingan, Surakarta 57126, Indonesia
(2) Department of Chemical Engineering, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami 36A, Kentingan, Surakarta 57126, Indonesia
(3) Department of Chemistry, Faculty of Natural Sciences and Mathematics, Universitas Sebelas Maret, Jl. Ir. Sutami 36A, Kentingan, Surakarta 57126, Indonesia
(*) Corresponding Author

Abstract


Bifunctional catalysts are often used in multiple reactions to synthesize certain products. The catalytic activity of bifunctional catalysts is influenced by parameters such as crystallinity, specific surface area, metal distribution, and morphology. Bifunctional catalysts are manufactured by adding metal to the support. The metal loading to the support often affects these parameters. Therefore, this research was conducted to determine the effect of CuO, MgO, and ZrO2 addition to HZSM5 on these parameters. The often-used loading method was deposition precipitation. The pH of the metal-support precursors' solution was increased to basic (pH of 8) to deposit the metal on the support. The loading effect was investigated by producing the following materials: CuO/HZSM5, CuO/ZrO2/HZSM5, CuO/MgO/HZSM5, and CuO/MgO/ZrO2/HZSM5. Each material was characterized using XRD, SAA, SEM, Mapping, EDS, and XRF. The results showed that all metal oxides could be embedded in the HZSM5. The loading of CuO, MgO, and ZrO2 to HZSM5 did not affect the crystallinity (structure) and morphology, increased the specific surface area, and was evenly distributed inside the pore of HZSM5. Further research is needed to determine the effect of crystallinity, specific surface area, and morphology on other metals and support types.

Keywords


crystallinity; specific surface area; morphology; deposition-precipitation

Full Text:

Full Text PDF


References

[1] Medford, A.J., Vojvodic, A., Hummelshøj, J.S., Voss, J., Abild-Pedersen, F., Studt, F., Bligaard, T., Nilsson, A., and Nørskov, J.K., 2015, From the Sabatier principle to a predictive theory of transition-metal heterogeneous catalysis, J. Catal., 328, 36–42.

[2] Kartohardjono, S., Adji, B.S., and Muharam, Y., 2020, CO2 utilization process simulation for enhancing production of dimethyl ether (DME), Int. J. Chem. Eng., 2020, 9716417.

[3] Kristiani, A., Sudiyarmanto, S., Aulia, F., Nurul Hidayati, L., and Abimanyu, H., 2017, Metal supported on natural zeolite as catalysts for conversion of ethanol to gasoline, MATEC Web Conf., 101, 01001.

[4] Din, I.U., Alotaibi, M.A., and Alharthi, A.I., 2020, Green synthesis of methanol over zeolite based Cu nano-catalysts, effect of Mg promoter, Sustainable Chem. Pharm., 16, 100264.

[5] Frusteri, L., Bonura, G., Cannilla, C., Todaro, S., Giordano, G., Migliori, M., and Frusteri, F., 2020, Promoting direct CO2 conversion to DME over zeolite-based hybrid catalysts, Pet. Chem., 60 (4), 508–515.

[6] Frusteri, F., Migliori, M., Cannilla, C., Frusteri, L., Catizzone, E., Aloise, A., Giordano, G., and Bonura, G., 2017, Direct CO2-to-DME hydrogenation reaction: New evidences of a superior behaviour of FER-based hybrid systems to obtain high DME yield, J. CO2 Util., 18, 353–361.

[7] Liu, Y., and Lu, H., 2020, Synthesis of ZSM-5 zeolite from fly ash and its adsorption of phenol, quinoline and indole in aqueous solution, Mater. Res. Express, 7 (5), 055506.

[8] Jiang, Q., Liu, Y., Dintzer, T., Luo, J., Parkhomenko, K., and Roger, A.C., 2020, Tuning the highly dispersed metallic Cu species via manipulating Brønsted acid sites of mesoporous aluminosilicate support for CO2 hydrogenation reactions, Appl. Catal., B, 269, 118804.

[9] Chen, D., Mao, D., Wang, G., Guo, X., and Yu, J., 2019, CO2 hydrogenation to methanol over CuO-ZnO-ZrO2 catalyst prepared by polymeric precursor method, J. Sol-Gel Sci. Technol., 89 (3), 686–699.

[10] Yanti, F.M., Valentino, N., Juwita, A.R., Murti, S.D.S., Pertiwi, A., Rahmawati, N., Rini, T.P., Sholihah, A., Prasetyo, J., Saputra, H., Iguchi, S., and Noda, R., 2020, Methanol production from biomass syngas using Cu/ZnO/Al2O3 catalyst, AIP Conf. Proc., 2223, 020006.

[11] Ren, S., Fan, X., Shang, Z., Shoemaker, W.R., Ma, L., Wu, T., Li, S., Klinghoffer, N.B., Yu, M., and Liang, X., 2020, Enhanced catalytic performance of Zr modified CuO/ZnO/Al2O3 catalyst for methanol and DME synthesis via CO2 hydrogenation, J. CO2 Util., 36, 82–95.

[12] Asthana, S., Samanta, C., Bhaumik, A., Banerjee, B., Voolapalli, R.K., and Saha, B., 2016, Direct synthesis of dimethyl ether from syngas over Cu-based catalysts: Enhanced selectivity in the presence of MgO, J. Catal., 334, 89–101.

[13] Palomo, J., Rodríguez-Mirasol, J., and Cordero, T., 2019, Methanol dehydration to dimethyl ether on Zr-loaded P-containing mesoporous activated carbon catalysts, Materials, 12 (13), 2204.

[14] Cheng, K., Zhou, W., Kang, J., He, S., Shi, S., Zhang, Q., Pan, Y., Wen, W., and Wang, Y., 2017, Bifunctional catalysts for one-step conversion of syngas into aromatics with excellent selectivity and stability, Chem, 3 (2), 334–347.

[15] Widayat, W., and Annisa, A.N., 2017, Synthesis and characterization of ZSM-5 catalyst at different temperatures, IOP Conf. Ser.: Mater. Sci. Eng., 214, 012032.

[16] Barton, R.R., Carrier, M., Segura, C., Fierro, J.L.G., Escalona, N., and Peretti, S.W., 2017, Ni/HZSM-5 catalyst preparation by deposition-precipitation. Part 1. Effect of nickel loading and preparation conditions on catalyst properties, Appl. Catal., A, 540, 7–20.

[17] Munnik, P., de Jongh, P.E., and de Jong, K.P., 2015, Recent developments in the synthesis of supported catalysts, Chem. Rev., 115 (14), 6687–6718.

[18] Abdullah, M., and Khairurrijal, K., 2009, A simple method for determining surface porosity based on SEM images using OriginPro software, Indones. J. Phys., 20 (2), 37–40.

[19] Hennemann, M., Gastl, M., and Becker, T., 2021, Optical method for porosity determination to prove the stamp effect in filter cakes, J. Food Eng., 293, 110405.

[20] Saraf, S., Singh, A., and Desai, B.G., 2019, Estimation of porosity and pore size distribution from scanning electron microscope image data of shale samples: A case study on Jhuran formation of Kachchh Basin, India, ASEG Extended Abstracts, 2019 (1), 1–3.

[21] Xu, Y., Liu, J., Ma, G., Wang, J., Lin, J., Wang, H., Zhang, C., and Ding, M., 2018, Effect of iron loading on acidity and performance of Fe/HZSM-5 catalyst for direct synthesis of aromatics from syngas, Fuel, 228, 1–9.

[22] Lin, B., Wang, J., Huang, Q., Ali, M., and Chi, Y., 2017, Aromatic recovery from distillate oil of oily sludge through catalytic pyrolysis over Zn modified HZSM-5 zeolites, J. Anal. Appl. Pyrolysis, 128, 291–303.

[23] Tursunov, O., Kustov, L., and Tilyabaev, Z., 2019, Catalytic activity of H-ZSM-5 and Cu-HZSM-5 zeolites of medium SiO2/Al2O3 ratio in conversion of n-hexane to aromatics, J. Pet. Sci. Eng., 180, 773–778.

[24] Magomedova, M., Galanova, E., Davidov, I., Afokin, M., and Maximov, A., 2019, Dimethyl ether to olefins over modified ZSM-5 based catalysts stabilized by hydrothermal treatment, Catalysts, 9 (5), 485.

[25] Nugrahaningtyas, K.D., Putri, M.M., and Saraswati, T.E., 2020, Metal phase and electron density of transition metal/HZSM-5, AIP Conf. Proc., 2237, 020003.

[26] Ozaki, Y., Suzuki, Y., Hawai, T., Saito, K., Onishi, M., and Ono, K., 2020, Automated crystal structure analysis based on blackbox optimisation, Npj Comput. Mater., 6 (1), 75.

[27] Amin, M.H., Putla, S., Bee Abd Hamid, S., and Bhargava, S.K., 2015, Understanding the role of lanthanide promoters on the structure-activity of nanosized Ni/γ-Al2O3 catalysts in carbon dioxide reforming of methane, Appl. Catal., A, 492, 160–168.

[28] Rodríguez-Martínez, C., García-Domínguez, Á.E., Guerrero-Robles, F., Saavedra-Díaz, R.O., Torres-Torres, G., Felipe, C., Ojeda-López, R., Silahua-Pavón, A., and Cervantes-Uribe, A., 2020, Synthesis of supported metal nanoparticles (Au/TiO2) by the suspension impregnation method, J. Compos. Sci., 4 (3), 89.

[29] Liu, N., Chen, G., Dong, W., Liu, C., and Xu, C., 2017, Preparation of Au nanoparticles with high dispersion and thermal stability by a controlled impregnation method for alcohol oxidation, Gold Bull., 50 (2), 163–175.

[30] Brazovskaya, E.Y., and Golubeva, O.Y., 2017, Study of the effect of isomorphic substitutions in the framework of zeolites with a Beta structure on their porosity and sorption characteristics, Glass Phys. Chem., 43 (4), 357–362.

[31] Fakruldin, A., Ramli, A., and Abdul Mutalib, M.I., 2018, Effect of preparation method on physicochemical properties of Fe/zeolite catalyst, J. Phys.: Conf. Ser., 1123, 012061.

[32] Błaszczak, P., Mizera, A., Bochentyn, B., Wang, S.F., and Jasiński, P., 2022, Preparation of methanation catalysts for high temperature SOEC by β-cyclodextrin-assisted impregnation of nano-CeO2 with transition metal oxides, Int. J. Hydrogen Energy, 47 (3), 1901–1916.



DOI: https://doi.org/10.22146/ijc.72255

Article Metrics

Abstract views : 2713 | views : 1710


Copyright (c) 2022 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 

Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web Analytics View The Statistics of Indones. J. Chem.