Adsorption Isotherms for CBY 3G-P Dye Removal from Aqueous Media Using TiO2 Degussa, Fe2O3, and TiO2/(DPC)

https://doi.org/10.22146/ijc.79706

Shireen Abdulmohsin Azeez(1), Fadhela Muhammad Hussein(2), Rasha Wali Mohi Alsaedi(3*)

(1) Department of Chemistry, College of Science, Mustansiriyah University, Baghdad 10052, Iraq
(2) Department of Chemistry, College of Science, Mustansiriyah University, Baghdad 10052, Iraq
(3) Department of Chemistry, College of Science, Mustansiriyah University, Baghdad 10052, Iraq
(*) Corresponding Author

Abstract


The adsorption of Cibacron Brilliant Yellow (CBY) 3-GP dye onto TiO2 Degussa, Fe2O3, and TiO2 anatase/Diphenylcarbizide in aqueous solution was studied with respect to temperature, contact time, and pH. The CBY 3-GP adsorption at equilibrium increased as the initial dye concentration increased for TiO2/DPC, while it decreased for TiO2 Degussa; however, it increased the initial dye concentration. The best removal efficiency was obtained at 1 mg for TiO2/DPC, TiO2 Degussa, and the amount of adsorption decreases with the rising of temperature. The negative ΔH° reveals the adsorption is exothermic and extremely negative ΔS° for TiO2 Degussa. The negative value for ΔS° indicates a regular increase of the randomness at the TiO2/DPC and Fe2O3 solution interface during adsorption. The intraparticle diffusion, pseudo-first- and second-order kinetic models were used. The Langmuir, Temkin, Freundlich, and Dubbin adsorption models were examined to describe the equilibrium isotherms. The usage of TiO2 Degussa and TiO2/DPC indicates that the equilibrium sorption was favorable.

Keywords


CBY dye; adsorption models; TiO2 Degussa; Fe2O3; kinetic study; dynamic data

Full Text:

Full Text PDF


References

[1] Khan, T.A., Singh, V.V., and Kumar, D., 2004, Removal of some basic dyes from artificial textile wastewater by adsorption on Akash Kinari coal, J. Sci. Ind. Res., 63 (4), 355–364.

[2] Khamparia, S., and Jaspal, D.K., 2017, Adsorption in combination with ozonation for the treatment of textile waste water: A critical review, Front. Environ. Sci. Eng., 11(1), 8.

[3] Nwodika, C., and Onukwuli, O.D., 2017, Adsorption study of kinetics and equilibrium of basic dye on kola nut pod carbon, Gazi Univ. J. Sci., 30 (4), 86–102.

[4] Shahabuddin, S., Khanam, R., Khalid, M., Sarih, N.M., Ching, J.J., Mohamad, S., and Saidur, R., 2018, Synthesis of 2D boron nitride doped polyaniline hybrid nanocomposites for photocatalytic degradation of carcinogenic dyes from aqueous solution, Arabian J. Chem., 11, 1000–1016.

[5] Zhou, X., Zheng, P., Wang, L., and Liu, X., 2019, Preparation of sulfonated poly (arylene ether nitrile)-based adsorbent as a highly selective and efficient adsorbent for cationic dyes, Polymers, 11 (1), 32.

[6] Onur, I., Demir, I., Yuceer, A., and Cinar, O., 2017, Isotherm and kinetic modelling of azo dyes adsorption, Eur. J. Eng. Nat. Sci., 2 (1), 210–216.

[7] Malik P.K., 2003, Use of activated carbons prepared from sawdust and rice- husk for adsorption of acid dyes: A case study of Acid Yellow 36, Dyes Pigm., 56 (3), 239–249.

[8] Qasem, N.A.A., Mohammed, R.H., and Lawal, D.U., 2021, Removal of heavy metal ions from wastewater: A comprehensive and critical review, npj Clean Water, 4 (1), 36.

[9] Baskar, A.V., Bolan, N., Hoang, S.A., Sooriyakumar, P., Kumar, M., Singh, L., Jasemizad, T., Padhye, L.P., Singh, G., Vinu, A., Sarkar, B., Kirkham, M.B., Rinklebe, J., Wang, S., Wang, H., Balasubramanian, R., and Siddique, K.H.M., 2022, Recovery, regeneration and sustainable management of spent adsorbents from wastewater treatment streams: A review, Sci. Total Environ., 822, 153555.

[10] Joudeh, N., and Linke, D., 2022, Nanoparticle classification, physicochemical properties, characterization, and applications: a comprehensive review for biologists, J. Nanobiotechnol., 20 (1), 262.

[11] Byakodi, M., Shrikrishna, N.S., Sharma, R., Bhansali, S., Mishra, Y., Kaushik, A., and Gandhi, S., 2022, Emerging 0D, 1D, 2D, and 3D nanostructures for efficient point-of-care biosensing, Biosens. Bioelectron.: X, 12, 100284.

[12] Hisatomi, T., Kubota, J., and Domen, K., 2014, Recent advances in semiconductors for photocatalytic and photoelectrochemical water splitting, Chem. Soc. Rev., 43 (22), 7520–7535.

[13] Bokov, D., Turki Jalil, A., Chupradit, S., Suksatan, W., Javed Ansari, M., Shewael, I.H., Valiev, G.H., and Kianfar, E., 2021, Nanomaterial by sol-gel method: Synthesis and application, Adv. Mater. Sci. Eng., 2021, 5102014.

[14] Thangavelu, K., Annamalai, R., and Arulnandhi, D., 2013, Preparation and characterization of nanosized TiO2 powder by sol-gel precipitation route, Int. J. Emerging Technol. Adv. Eng., 3 (1), 636–639.

[15] Ahmad, M.A., Herawan, S.G., and Yusof, A.A., 2014, Equilibrium, kinetics, and thermodynamics of remazol brilliant blue R dye adsorption onto activated carbon prepared from pinang frond, Int. Scholarly Res. Not., 2014, 184265.

[16] Xiao, G., Su, H., and Tan, T., 2015, Synthesis of core–shell bioaffinity chitosan–TiO2 composite and its environmental applications, J. Hazard. Mater., 283, 888–896.

[17] El Mouchtari, E.M., Daou, C., Rafqah, S., Najjar, F., Anane, H., Piram, A., Hamade, A., Briche, S., and Wong-Wah-Chung, P., 2020, TiO2 and activated carbon of Argania spinosa tree nutshells composites for the adsorption photocatalysis removal of pharmaceuticals from aqueous solution, J. Photochem. Photobiol., A, 388, 112183.

[18] Wang, N., Ye, C., Xie, H., Yang, C., Zhou, J., and Ge, C., 2021, Fe2O3 enhanced high-temperature arsenic resistance of CeO2–La2O3/TiO2 catalyst for selective catalytic reduction of NOx with NH3, RSC Adv., 11 (16), 9395–9402.

[19] Tiwari, A.P., and Rohiwal, S.S., 2019, “Synthesis and Bioconjugation of Hybrid Nanostructures for Biomedical Applications” in Hybrid Nanostructures for Cancer Theranostics, Eds. Ashok Bohara, R., and Thorat, N., Elsevier, Amsterdam, Netherlands, 17–41.

[20] Ahmad, M.A., and Alrozi, R., 2011, Removal of malachite green dye from aqueous solution using rambutan peel-based activated carbon: Equilibrium, kinetic and thermodynamic studies, Chem. Eng. J., 171 (2), 510–516.

[21] Fan, T., Liu, Y., Feng, B., Zeng, G., Yang, C., Zhou, M., Zhou, H., Tan, Z., and Wang, X., 2008, Biosorption of cadmium(II), zinc(II) and lead(II) by Penicillium simplicissimum: Isotherms, kinetics and thermodynamics, J. Hazard. Mater., 160 (2-3), 655–661.

[22] Tamjidi, S., and Esmaeili, H., 2019, Chemically modified CaO/Fe3O4 nanocomposite by sodium dodecyl sulfate for Cr(III) removal from water, Chem. Eng. Technol., 42 (3), 607–616.

[23] Singh, K., Kumar, A., Awasthi, S., Pandey, S.K., and Mishra, P., 2019, Adsorption mechanism of carboxymethyl cellulose onto mesoporous mustard carbon: Experimental and theoretical aspects, Colloids Surf., A, 581, 123786.

[24] Alkan, M., Doǧan, M., Turhan, Y., Demirbaş, Ö., and Turan, P., 2008, Adsorption kinetics and mechanism of maxilon blue 5G dye on sepiolite from aqueous solutions, Chem. Eng. J., 139 (2), 213–223.

[25] Zghal, S., Jedidi, I., Cretin, M., Cerneaux, S., and Abdelmouleh, M., 2023, Adsorptive removal of Rhodamine B dye using carbon graphite/CNT composites as adsorbents: Kinetics, isotherms and thermodynamic study, Materials, 16 (3), 1015.

[26] Banerjee, S., and Chattopadhyaya, M.C., 2017, Adsorption characteristics for the removal of a toxic dye, tartrazine from aqueous solutions by a low cost agricultural by-product, Arabian J. Chem., 10 (Suppl. 2), S1629–S1638.

[27] Bhattacharyya, K.G., and Sarma, A., 2003, Adsorption characteristics of the dye, Brilliant Green, on Neem leaf powder, Dyes Pigm., 57 (3), 211–222.

[28] Aljeboree, A.M., Alshirifi, A.N., and Alkaim, A.F., 2017, Kinetics and equilibrium study for the adsorption of textile dyes on coconut shell activated carbon, Arabian J. Chem., 10 (Suppl. 2), S3381–S3393.

[29] Abdoul, H.J., Yi, M., Prieto, M., Yue, H., Ellis, G.J., Clark, J.H., Budarin, V.L., and Shuttleworth, P.S., 2023, Efficient adsorption of bulky reactive dyes from water using sustainably-derived mesoporous carbons, Environ. Res., 221, 115254.

[30] Habeeb, O.A., Ramesh, K., Ali, G.A.M., Yunus, R.M., and Olalere, O.A., 2017, Kinetic, isotherm and equilibrium study of adsorption capacity of hydrogen sulfide-wastewater system using modified eggshells, IIUM Eng. J., 18 (1), 13–25.

[31] Inyinbor, A.A., Adekola, F.A., and Olatunji, G.A., 2016, Kinetics, isotherms and thermodynamic modeling of liquid phase adsorption of Rhodamine B dye onto Raphia hookerie fruit epicarp, Water Resour. Ind., 15, 14–27.

[32] Hu, Q., and Zhang, Z., 2019, Application of Dubinin–Radushkevich isotherm model at the solid/solution interface: A theoretical analysis, J. Mol. Liq., 277, 646–648.

[33] Foo, K.Y., and Hameed, B.H., 2010, Insights into the modeling of adsorption isotherm systems, Chem. Eng. J., 156 (1), 2–10.

[34] Cáceres-Jensen, L., Rodríguez-Becerra, J., Garrido, C., Escudey, M., Barrientos, L., Parra-Rivero, J., Domínguez-Vera, V., and Loch-Arellano, B., 2021, Study of sorption kinetics and sorption–desorption models to assess the transport mechanisms of 2,4-dichlorophenoxyacetic acid on volcanic soils, Int. J. Environ. Res. Public Health, 18 (12), 6264.



DOI: https://doi.org/10.22146/ijc.79706

Article Metrics

Abstract views : 1783 | views : 1016


Copyright (c) 2023 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 

Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web Analytics View The Statistics of Indones. J. Chem.