Optimasi Ekstraksi Oleoresin Pala (Myristica fragrans Houtt) Asal Maluku Utara Menggunakan Response Surface Methodology (RSM)

https://doi.org/10.22146/agritech.9581

Muhammad Assagaf(1*), Pudji Hastuti(2), Chusnul Hidayat(3), Supriyadi Supriyadi(4)

(1) Balai Pengkajian Teknologi Pertanian (BPTP) Maluku Utara. Jl. Kusu, Sofifi , Kota Tidore Kepulauan
(2) Fakultas Teknologi Pertanian Universitas Gadjah Mada Yogyakarta. Jl. Flora No. 1, Bulaksumur, Yogyakarta 55281
(3) Fakultas Teknologi Pertanian Universitas Gadjah Mada Yogyakarta. Jl. Flora No. 1, Bulaksumur, Yogyakarta 55281
(4) Fakultas Teknologi Pertanian Universitas Gadjah Mada Yogyakarta. Jl. Flora No. 1, Bulaksumur, Yogyakarta 55281
(*) Corresponding Author

Abstract


The purpose of this study was to obtain the optimum extraction conditions by performing the optimization of temperature and extraction time and characterization of constituent chemical components of oleoresin nutmeg (Myristica fragrans Houtt) Origin of North Maluku. Oleoresin extracted using maceration method, for optimization of extraction conditions was done by using Response Surface Methodology (RSM) design with the Central Composite Design (CCD) two factors X1 (temperature / oC) and X2 (times / minute). As for the characterization of the chemical constituent components of nutmeg oleoresin used GC-MS. From the results obtained by the optimization of extraction conditions for extracting the optimum temperature of 51.98 °C and the optimum extraction time was 273.82 minutes with the results for the optimum result of oleoresin obtained by 14.88%. The results of characterization by using GC-MS obtained with 39 components making up oleoresin chemical compound with the largest relative area of the compound methyleugenol (33,397%), myristicine (10,898%), cis-methyl isoeugenol (9,086%), elemicin (8,329% ), and isocoumarin (5,608%) with 34 percent of the components that have relatively minor area.

ABSTRAK

Tujuan dari penelitian ini adalah untuk memperoleh kondisi ekstraksi yang optimum dengan melakukan optimasi suhu dan lama ekstraksi dan karakterisasi komponen kimia penyusun oleoresin pala (Myristica fragrans Houtt) Asal Maluku Utara. Oleoresin diekstrak menggunakan metode maserasi, untuk optimasi kondisi ekstraksi dilakukan dengan menggunakan metode Response Surface Methodology (RSM) dengan disain rancangan Central Composite Design (CCD) dua faktor yaitu X1 (suhu/oC) dan X2 (waktu/menit). Sedangkan untuk karakterisasi komponen senyawa kimia penyusun oleoresin pala digunakan GC-MS. Hasil optimasi kondisi ekstraksi diperoleh suhu optimum ekstraksi sebesar  51,98oC dan waktu optimum ekstraksi adalah selama 273,82 menit dengan hasil optimum hasil oleoresin yang diperoleh sebesar 14,88 %. Hasil karakterisasi dengan menggunakan GC-MS diperoleh 39 komponen dengan 5 senyawa kimia penyusun oleoresin dengan luas area relatif terbesar yaitu senyawa methyleugenol (33.397%), myristicine (10.898%), cis-methyl isoeugenol (9.086%), elemicin (8.329%), dan isocoumarin (5.608%) dengan 34 komponen  yang memiliki persen relatif luas area minor.


Keywords


Nutmeg oleoresin; extraction optimization; Response Surface Methodology; characterization

Full Text:

PDF



DOI: https://doi.org/10.22146/agritech.9581

Article Metrics

Abstract views : 7280 | views : 30402

Refbacks

  • There are currently no refbacks.




Copyright (c) 2013 Muhammad Assagaf, Pudji Hastuti, Chusnul Hidayat, Supriyadi Supriyadi

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

agriTECH has been Indexed by:


agriTECH (print ISSN 0216-0455; online ISSN 2527-3825) is published by Faculty of Agricultural Technology, Universitas Gadjah Mada in colaboration with Indonesian Association of Food Technologies.


website statisticsView My Stats